It would be sitting on the fabric...so may also void Bestop warranty. Not to mention, there will be extra stress on the frame - once "parachute" mode is engaged.
This is really unfortunate, because one of the main reasons we need a half rack - is for the Sunrider.
Bummer, because I really...
I'm about to install an RTR Lightbar along with a new winch bumper and skid plates....but I was wanting to know my options to help "prevent" surface rust on these powdercoated parts.
I don't expect to fully prevent surface rust, but rather add extra protection to areas where powdercoat is...
Any updates on a fix for this?
I’ve got Kings and trying to decide on a compatible ARB mount. There are others that do not mount to the shock tower.
@fordguru @4x4TruckLEDs.com
Have you installed on any Bronco’s with coilover remote resorvoirs?
They usually mount to the crashbar ears.
Just wondering what mounting options are left.
I guess the question would be....can a little trimming be done to the front of the rack in order to let the Sunrider lay flat?
Not sure how much stress the Sunrider would suffer at highway speeds - if not allowed to sit down all they way as designed.
Trimming would lose the front fairing...
I’m also waiting to hear an answer on this.
I have a 2-door with a newly installed Sunrider.
I can send some side profile pics with the tops open and showing some angles, or you can just send me a 2-Dr half rack and I can be your test guinea pig :)
Sasquatch Badlands Wheels and Tires. Perfect Condition
2022 Bronco Sasquatch Wheels and Tires from my 2022 Ford Bronco Badlands Sasquatch Edition with less than 400 miles!
I replaced them with my 37" setup when I got the King's installed, about 2 weeks after I took delivery of the Bronco...
What type of hood struts are you running? Do you think any of the other types would be ok?
For reference, I made a post with pic's about potential fitment issues:
https://www.bronco6g.com/forum/threads/arb-mount-compatibility-with-hood-shocks-cold-air-intakes-kr-jcr-grimm.71885/
I'm trying to plan out air setup and hood shocks...and eventually cold air intake for my 2.7 Badlands with King coilovers.
I have read about some compatibility issues with some shocks and some air brackets. Same thing with Cold Air Intakes.
Can anyone please share their combined setups and...
@Knives2.0 is correct. Get through the checkout screens and the promo shows up.
I just ordered, too. Make that only 6 left :rolleyes:
FYI: The seller name is SHULONG, but @Mabett replied that this is an authorized seller account.
I don’t think that is Mabett’s seller name. Maybe it is another seller hijacking his SKU.
I think he said they should be back in stock later this week.
@Mabett ?
What part of the FlowmasterFX was low?
The whole muffler or mainly the dual tips,
Your bent havoc rear bumper pic got me worried, since I have the same bumper.
I was considering the FlowmasterFX, but replace the tips with turn downs.
Maybe I need to try a different setup.
I'm with you. I just ordered a Sunrider for my 2-door. Texas weather is so unpredictable. Oem front panels were a pain and no storage room in the 2-door.
I had a real hard time deciding between it, and the Trektop ("Safari Top"). Still on the fence in my head. FOMO on full open...
Is anyone running skids with coilover reservoir protection?
I've got King Coilovers behind a factory bashplate on my Badlands Sasquatch.
I'm looking to upgrade the skids, and I like most of the ones being discussed here, but most seem to be a bit narrow compared to the wide factory plate.
I...
Thanks for checking up on it.
I just watched your install video for the stock location intercooler. This shot of the passenger side gives me hope.
If needed, I can do the minimal trimming on the inside Havoc bumper bracket as you suggested.
Does anyone think adding a potential 4 amp draw to the oem circuit without a relay could cause issues long term?
I’m running SSC2 Pros (rates at 2 amp each) with this kit’s harness, but no bracket. Mine are going into the bumper….soon.
I just made a detailed post about this an older thread…...