Just an FYI for everyone following this thread. I had my dealer order and add the nuts to the bolts highlighted above and this completely fixed my leak. As I inferred, the leak was caused from water getting into the sealed channel along the A-Pillar. This is supposed to happen, and there are...
Just an FYI for everyone following this thread. I had my dealer order and add the nuts to the bolts highlighted above and this completely fixed my leak. As I inferred, the leak was caused from water getting into the sealed channel along the A-Pillar. This is supposed to happen, and there are...
I also stand inside on my 2Dr and fold it back from the middle. I feel like I can do it from the side (outside the vehicle) but the bows and cross bars bend and seem to have a lot of tension so Iâm afraid it will break. I havenât put my trektop back on this summerâŚneed to do it this weekend I...
I also have this leak, had it in the dealer and still leaking. I did some investigation under the interior trim and noticed the two drivers side bolts holding the header seal to the body are missing the nuts. Does anyone know the size or part number of those bolts to order @Ford Motor Company...
@srick76 or @flip do you know what size nut or the part number you should use for this (pic below the of the bolts from the TSB)?
I also have this leak and took to the dealer but itâs still leaking. I did some investigating under the interior trim and noticed there were no nuts on the two...
Thanks @flip. I always park it with a garbage bag and towel on the dash over the hero switches. Of course I thought the issue was fixed by the dealer so didnât do it on the last wash and now my screen is cloudy again. Iâm also worried what all the water going through the over head lights and aux...
@flip do you know if the hero switches are supposed to be sealed or is that gap actually supposed to be there. Seems like real flaw for an open top vehicle to have a really easy way for water to drip all over electronics...
I have the exact same issue, and coincidentally (or not) the same model (2 Door Black Diamond) and Iâm located on Long Island. My electronics still work but the screen is all cloudy now. I brought it in to have it fixed but just washed my car this weekend and the same thing happened with the...
Great infoâŚThanks! Planning on installing mine this weekend, itâs been sitting in the box 5 months now. Hopefully thereâs no damage. Was also worried about scratching the roll bar. Does anyplace just sell vinyl sheets you can cut and wrap yourself?
Thanks @jasonfâŚand can you keep the hard top (excluding the brackets that were on the frame) all assembled when you store them? Then just attach the brackets and spread the top with the bars over and screw it all in? I just want to know how much can be kept together or if the whole thing needs...
@Bestop_Team, sorry I donât mean what can stay attached to the truck. I mean can you keep the twill, and the cross bars, etc. attached to each other and store in the garage all assembled. Then just attach it again right to the truck or do you need to dissemble everything to but back on?
I got mine for 3% under invoice from Chapman Ford in Horsham PA (2.5 hr drive). Not sure what deal theyâre offering now but its likely a similar issue with Granger where youâll be waiting a whileâŚ
Nah. Itâs in the NYC right nowâŚgot a ticket and someone backed into me parking within an hour of each other. The steel bumper showed no marks thankfully.
Iâm curious what can be left on the truck from the soft top assembly when you swap back to the hard top. And also what can be left put together on the soft top to make the quicker when you add that back in the spring. Maybe it will just be a âPITAâ the 1st time???
Curious if anyone has gone from the Hardtop to the TrekTop and back to the Hardtop. After reading the TrekTop install instructions and watching the below video it seems like it would be a pain to do each season. Plus you have to glue down some vinyl and seals that you obviously canât remove...
Iâve noticed a few issues on my DM Bronco. Not sure if all/any specifically relate to Dirt Mountain. My specs and dates are in my signature.
1. Seam edges of the Rear MIC Top appear to show the internal cardboard mesh (pic included).
2. Small leak between the front panels above the aux...
Did anyone ground the white (spliced with the red for my BD) on the outside? If so which bolt did you use???
Iâm going to run the power back to the battery so will not be opening up the rear driverâs side panel.