Search results

Any news is good news, probably won’t see mine until a year from now since my reservation date was in December. Oh well should be plenty of wheel choices by then and tunes well tested.

BTW, Smittybilt (cheap) Manufactured in China with China parts. Warn Assembled in US with China parts Ramsey (expensive)manufactured in US with all US manufactured parts that are readily available. I have a Ramsey 12K on my F-250 and Ramsey 5K on my Samurai - excellent winches.

My deer lease is in East Texas, here is my Samurai with lift, lockers and Superswampers

Only 1” wider on the inside right? So maybe a 1” spacer? I hate the thought of spacers but the Method 106 is -44.

I have a Badlands Sasquatch on order. I plan to have second set of Method wheels and Nitto 35” Mud Graplers for off road. My question is will the 14 1/2 “ wide Nittos rub with stock offset without using spacers?

I have restored many vehicles in my life, this method is no big deal if you properly treat the raw steel Perforation. These are chrome plated steel, new ones with tape will no doubt be plastic. Bottom line do whatever you are comfortable with, this is the path I’ve chosen.

Modern emblems have solid backs and work well with double sided tape. These have an open back which would reduce the tape contact area. Any holes drilled in the steel would require a light sanding on both sides to remove the burr and application of primer paint to prevent corrosion. I would add...

I think that much double sided tape with all the intricate cuts would trap much dirt and dust over time. The peg method allows water under pressure to blast dirt out.

There are pegs on the back same as OEM. So you take these, a 2X4, and a sheet of paper, press emblem onto paper on top of wood 2X4. Then you have pattern of pegs to drill into your fender, not for the faint of heart. Remove fender, place paper where you want, trace punch holes onto fender then...

Very cool!

Sorry that was cruel... Yea well I have a December reservation date so I get mine after all of you some bitches get yours. I’m going to mount this above my Badlands Sasquatch sticker for some 3D. Decent quality repro from China.

Why Doesn't Ford contract Bestop to crank out a shitload of 2D soft tops?

Man local Wally Worlds take old oil, they gladly except mine even mixed with trans and dif fluids. My son took his Mustang GT to quickly change type of place, they forgot to add oil, toast down the road, he had his stereo blasting didn’t hear starved engine. it still ran he added oil and traded...

Wow thanks made my day!

Rear seats seem to fold and lay flatter than in other images I have seen.

It is an Area 51 go figure

Quite a successful hunting trip. Thanks, we need all we can get!

That would solve winch blocking camera as well.

By the way, what is the vented protrusion on the inside of the tailgate?

First thing I'm doing is removing one of the back seats, and inserting custom carpet covered plywood deck to provide flat floor on one side for my ice chest. No way am I going with 4 door.