I have a Prusa printer and print some things, but I don’t know squat about creating my own designs. I would LOVE to create a cover for the GOAT control knob (so my dog doesn’t step on it and shift the transmission).
To plumb it, I used 16 feet of hose (from Apex), two 90 degree npt street angles in steel from Hydraulics Direct. The hose goes from the compressor baffle across to firewall to the driver side. Through the factory grommet below the upfitter wires, beneath the door sill and exits where the...
I want to keep it clean and simple.
I can see the allure to having four hoses going at her all at one time. Getting filled from multiple directions… I’m not sure how I would set something like that up.
The ARB compressor kit I used was through Ford Performance (because I had a crap ton of points). Pretty straight forward install, though it does take some time. There are some great videos on here. The pressure module is plumbed beyond the ARB ballast, so you can affix that wherever. When I...
The ARB compressor kit I used was through Ford Performance (because I had a crap ton of points). Pretty straight forward install, though it does take some time. There are some great videos on here. The pressure module is plumbed beyond the ARB ballast, so you can affix that wherever. When I...
Permanently attached. Just flip the switch from inside. Pull the hose out and fill till the compressor stops, then move on.
I might throw a tee in the line to the pressure module and add an additional high pressure access point. That way if I want to use air tools or whatever I have a second...
Got my Apex mini reel mounted. Decided to put it driver side, and it fits nicely behind the speaker enclosure.
Using the twin ARB compressor under the hood with the additional pressure kit. (So it stops inflating at the pressure I set on my phone). Wired it to the overhead switches. All...