If you scroll down to the options, it looks like these guys can do some custom stuff. I had some similar stuff on one of my jeeps like you’re talking about and I think mine was neoprene. I’d like something for my bronco also just so I can cover up the rollover frame as I’m not a fan of the...
You’re welcome. No wheel spacers, but I swapped Sas flares for standard ones. I prefer to keep a narrower profile right now, the other wheels I had for a year were about 1 ¼ to 1 ½ outside the Sas flares. These are about the same outside stock flares.
To catch you up on the last page or so of posts:
on 35's, just Eibach springs (removed spacer leveling lift that was installed before installing Eibach Springs), Stock Sasquatch with "Capable" Front Bumper.
Ride quality is better to me than Stock Sas Suspension with 1" spacer lift, no...
I ran 37x12.5 ridge grapplers with Fifteen52 15 offset with just front leveling lift and had slight rub on liner at full lock in reverse so with these springs I’m hopeful 37x12.5 clears with Zero offset Sas wheels but not 100%. Will try soon.
I marked each flare (standard non Sas flares btw) on bottom edge for repeated measurement from same location. Bronco tool storage drawer system in rear, no spare, no winch on front just steel bronco bumper.
I prefer the ride so far with these springs over the spacers in front. That made our...
I stopped down to the shop to pick something up this morning and they are about finished with mine, supposed to be getting alignment now and finished within the hour. Will post up measurements without winch but with "capable" bumper in a few.
Well mine won't be done until early next week now. My shop got rears done easy enough but they couldn't get the front springs with either a wall mount or floor compressor 🙄 not sure what the deal was since I wasn't there though.
Having mine installed Friday. Wildtrak with “capable” bumper, no winch for front, rear has no spare and ford storage drawers in cargo area. I already have a 1” or so spacer lift installed in the front so my measurements will be with that installed and then with it removed and the Eibach springs...
Conventional wisdom would be that a taller spring would create a stiffer ride but as stated a few posts back when I called Eibach they stated these springs are a progressive spring so they wouldn’t necessarily be stiffer, but stiffen more as they compress.
To say these will be stiffer isn’t...