Sponsored

Search results

  1. Question about Theft - RFID blocking protection.

    Based on this video and comments on it, that doesn't seem to be the case:
  2. Resolved: Speed Limit Sign in Instrument Panel?

    I have a Ford Nav subscription, I get the speed signs as long as I don't have a route active in Apple Maps, but if a route is active in the phone it stops the speed signs on the dash from showing up. I haven't used Waze on the phone to see if the behavior is the same, but I wouldn't be...
  3. FORScan Bronco Working Spreadsheet (double honk, sport mode, chimes, seatbelts, and more!)

    So I've noticed that if there is something heavy enough to be detected as a person, or someone sitting in the passenger seat, that they can access things like the destination search or phone list while the vehicle is in motion but if there is nothing in the passenger seat those functions are...
  4. Bronco Goes Completely Dead in Traffic

    Mine did this a few times, turned out to be a loose negative battery terminal connection. Tighted it and haven't had any issues since. When it did happen to me, it was almost always with the auto start-stop kicked in at a light.
  5. Audio question for someone that knows zero about audio

    The B&O system itself isn't worth the upgrade, it's far easier to upgrade the base/high system if all you want is to have it sound better. Depending on how much space you are willing to trade in the process, the only part of the B&O system worth putting in would be the ACM so that you can get...
  6. Removing B&O Amp - SYNC dependent/connected

    So right now that Key 200.4 is going to be taking the amplified output of the factory amp, if you remove the factory amp there will be no signal for the Key amp to use without an A2B converter. The A2B converter will give you RCA outputs that you can feed to the Key amp. The Lux package makes...
  7. Removing B&O Amp - SYNC dependent/connected

    The APIM (the Sync module effectively) and ACM (Radio Module) will work with or without the factory amp, it's just a matter of forscan programming the APIM which type of signal generate to the ACM. The ACM that is installed in a LUX bronco is only going to have the physical output signal that...
  8. Fire Extinguisher Mounting in the Bronco - Show Your Installs

    I've almost pulled the trigger on buying a few of these so many times, but in the end I keep coming back to that the only time I really seem them working is in controlled tests almost always involving a fire in a container with a fuel that doesn't become hot enough to self-ignite. Bottom line...
  9. Fire Extinguisher Mounting in the Bronco - Show Your Installs

    The Misadventure Lab guys did some testing on fire extinguishers, basically the old school ones and the blanket are the only ones that did the job.
  10. Sub Woofer Delete

    I removed the link, since you're right that's not the right amp connector.
  11. mObridge amp in non-B&O system - HD Radio Retrofit

    Back with an update. Reinstalled my rear panel temporarily. It seems that the key fob antenna is hitting the stealthbox and preventing the panel from fully seating in the rear. When I do some other work in the area I will take the panel off and do something about the antenna interference, it...
  12. mObridge amp in non-B&O system - HD Radio Retrofit

    The amp is on a mounting plate with nutserts for the amp to mount to, moving it back or down slightly are options if I can't get enough clearance by simply making room for the upper nutsert to go into the fiber glass a bit (there's a thick area you can drill into). I do need some clearance for...
  13. mObridge amp in non-B&O system - HD Radio Retrofit

    Now that I've had this installed a few weeks, I wanted to post a quick update. Still a work in progress and I still need to actually tune the DSP for the speakers. The rear side panel does not fit as with the stealthbox and mObridge amp as I currently have them installed. There are 2...
  14. mObridge @ SEMA - See you there!

    oh man I didn't need to read that
  15. mObridge amp in non-B&O system - HD Radio Retrofit

    Yeah, when I realized I was gonna lose HD Radio my first thought was I'll just do a swap, but then I realized it really wouldn't be worth the effort for it's own sake and I moved on... Then I discovered if you don't wanna lose cargo space your best option is gonna be the mObridge amp and one of...
  16. mObridge amp in non-B&O system - HD Radio Retrofit

    Intro So you bought a Bronco without the Lux/B&O stereo system and you're not happy with the sound. Maybe you're like me and tried replacing the fake sub with the Fusion Amp and Kicker 48CWRT674 but still weren't happy with the sound. Or maybe you really miss having HD Radio. Join me on my...
  17. Cleaning...Took the top off now I have dirt mud and dust everywhere.

    Week 2 of ownership I took my Bronco to Uwharrie, with the top down. It was dusty as hell, especially being in the middle of the convoy. I spent like 2 hours cleaning the interior when I got back home and thought I did an OK job.... until I started taking it apart to install my stereo stuff...
  18. JL audio bronco stealth box install with muse way six channel amplifier

    That cubby catches any water that gets into the cargo area when the top is down, but also because it's more or less directly over the muffler it can get condensation build up in more humid months from the outside/inside temperature differential. I recall reading some people discovering that...
Top