Traded my Bronco in this last weekend. Used for a few months. Panda claims up to 20% gains on 93 octane. Change setting on the fly via bluetooth.
I ran 91 octane on setting 5 and definately feel a difference! Super easy to install, and leaves no trace on the engine computer. If this worked on...
In Forscan I changed the configuration in BdyCM Module config (AS BUILT format)
from this:
726-43-01 0202 0000 0176
to:
726-43-01 0101 0000 0176
0101 which is 'Turn and DRL'. Default was 0202 which was 'Turn Only'. 0303 and 0404 leave the position (marker lights) having priority. If there is a...
I also did the amber overlays from stickerfab.
Then in Forscan I changed the configuration in BdyCM Module config (AS BUILT format)
from this:
726-43-01 0202 0000 0176
to:
726-43-01 0101 0000 0176
0101 which is 'Turn and DRL'. Default was 0202 which was 'Turn Only'. 0303 and 0404 leave the...
I have 726-43-01 set to:
0101 amber when driving, turns work, white when headlights on or trans in park
0202 is white, turns work (stock)
0303 amber, no turns
0404 amber, no turns
I have a 21 big bend non-mid pkg w/signature headlights
0101 or 'Turn and DRL' is the only mode that works the...
I didn't want to deal with heated seats. I'm fine without them. Not sure how big the heating pads are, but there isn't much room between the seemed areas of the seats. That's all hog ringed in place. I've never seen what the heating pads look like though.
Leather, Black/Mahogany, I didn't order...
@Dads_bronze_bronco
Front seats;
-Two bungee straps under neath. You have to pop an electrical connector retainer clip loose underneath to get the strap loose.
-You will see a black clip running along the bottom edge.
-There are zippers on the back corners of the seats. The zipper slidder is...
No heated seats. I didn't want to make the install any harder. The pads would need to be pretty small to fit between the seemed areas where the hog rings are. I guess you could not hog ring the center, but I'm not sure if that would stay in place over time.
Yes, storage of parts has gotten better over the years. I remember seeing things like that. When I did my Fluid Power Certification years ago, the instructer said the same thing. He was surprised we didn't have more failures. We have a hydraulics and electrical standards team in place now a...