Search results

The rear speakers are still limited. That said , their purpose is for rear fill. Most of the sound is from the front stage as it should be.

im running kicker Key amps that has high level inputs and no issues. You might look at the kicker keyloc.

Assuming it fits into the ford holes, then yes.

1 inch is the metra.

I couldn’t fit the kick panel speaker cover back in place without trimming the inner ring of the cover. The speaker adapter pushed the 6.5 out farther than the stock speaker. It’s easy to trim with some side snips.

Yeah that’s were I ran my wires exactly.

Picked mine up a week ago and immediately drove to Discount tire for bigger tires. 285/75/R16.

I do think the three and one inch would fit. Here’s a pic of the grilI. didn’t take a pick of the backside since I’ve already busted a tab on one of them. There are grill indents so I suppose you can drill them out.

A single wire goes from the stereo to the left kickpanel and a wire to the right kickpanel. From the kickpanel, a secondary wire travels up to the dash speaker. If you’re going to use a four channel amp for the four front speakers , I think wiring directly to the kickpanels is the best...

That’s right. I’ll take a pic of the battery and connectors in a bit and post.

The grill only has holes above the 4 inch speaker so offsetting a tweeter in that space might be an issue unless your going to mod the grill as well. Originally, I was thinking of a 3 inch mid and 1 inch tweeter in that space.

the 200.4 and 500.1 are separately placed so I ended up running two 8 gauge wires with a separate 20 and 60 amp fuse holders near the battery. The 200.4 came with a fuse holder FWIW.

You can either use a line our converter (LOC) coming off the speaker wire or some amps nowadays have built in high level (speaker) inputs. One note on the bronco is you want to tap into the front speakers (going into kickpanel speakers ) since it is a full frequency range. The speaker pods...

when doing the time alignment , you fade it all the front to not interfere with the calibration. The rear are just for fill and you barely hear them at all over the fronts and subwoofer. Maybe my kids hear them in back:D

I had seen those as well and thought it was a typo on the price. How are you intending to mount the tweeter assuming the 4 inch drops into the dash slot?

Agreed this is the easiest method.

bi-amp is kicker’s term for running a fully active front stage using two of the channels for the tweeter/dash speakers and two channels for the woofers. During the key setup process with the microphone it time aligns all of the speakers and determines each speakers frequency response. The...

Just finished the install on my base two door this past weekend. Many thanks to the contributors of this post and especially @philjmatt for the idea of the mounting of the kicker key 200.4. This placement allowed for short runs of speaker and power & ground wires...

Loving the USA version of the 1up you have there. Are you running an extension on yours? I bought the 1up rac attach for my bronco once it arrives.

Than Thanks. Looks like a clean installation. (y)