Search results

A 1.5" spacer on Sas wheels equates to a -8 mm offset wheel so it's a little more poke than a 0 mm offset.

Tire width will be the main driver for amount of poke assuming 0 mm wheel. You will not see as many 17x8 0 mm wheels as 17x8.5 0 mm wheels on this site. Poke will essentially be the same between those two wheels widths with 0 mm offset because the poke is driven by the tire width since the...

Those look great! I'm torn between the KO2's and KM3's when I get my Bronco. Are you running a leveling kit and I don't recall if you are going with spacers or not?

Minimum recommended wheel width is usually 8.5" for a 12.5" wide tire. You can do a 315 on 8" but not sure how wide OBX wheels are...

I haven't measured the 12.5" KM3s but going just by looks I would say yes the 13.5 are a full inch wider....they really do look wider. I measured the tire mounted on the wheel but not on the truck to be 36 1/4 X 13 1/8 but don't recall the psi. I would say they are wider than other companies...

Here are a couple pics of the KM3 37x13.5 on 17x8.5" wheels I ran. They are beefy and would look good on the Bronco!

Checkout this thread: https://www.bronco6g.com/forum/threads/37%E2%80%99s-fitted-on-sasquatch-bronco-straight-off-the-transport.19784/ He is running even bigger tires then the KM3s your looking at...37x14.6 per spec but it does look like he's rubbing on stock wheels. I ran the 37x13.5 KM3 on a...

I installed the 3M brand on my previous new truck and got some pinstripes due to going through a tight area with branches. To my surprise they were gone the next time I looked for them. The self healing tech is real!

I don't think it was mentioned but these 37x13.5R17 are actually 37.0x14.6 per Toyo specs. These are true 37s and very WIDE tires! Not sure why they don't list them as 14.5" wide? The Toyo MT 37.0x12.5R17 spec out at 36.8x12.5. Either way great looking ride and if you can fit these 37s you...

So an 8.5" wide wheel with positive offset ranging from 6mm to 19mm. With stock 8.5" wide wheels the spacer would need to be between 11mm (0.43") and 24mm (0.94"). An 18mm or 0.75" spacer would land close to the middle of the range....or just get those +12 wheels that were mentioned! Was that...

Per a recent email from Ford you should get two more emails. The next one should be when the vehicle is built with en estimated dealership arrival date and then another email when your Bronco has been shipped with the latest estimated arrival date.

Now that you mention it I did increase the psi in the spare and measured 36 1/2 so the specs look to be accurate. Spec diameter for stock tires is 34.4 so looks like a good 2" diameter increase or 1" ground clearance over stock. Good to know I can run some 37 KM3s on the Bronco with a little...

Great looking Bronco! I have a white Sas Badlands on order and liking what I see here with the KM3's. Did you take any measurements of the stock tires vs 37 KM3's for comparison? I know the KM3 run a little small. I ran 37x13.5x17 KM3s on a Power Wagon and they measured 36 1/4" x 13 1/8"...