Does it sit level now or literally sags? I thought the spacers were front/back specific with the rear spacers being 1/4" to 1/2" shorter to "Level" the stance.
If your Battery hits either 75% or 70% charge the Auto start/stop is shut off, it if gets lower you will start to receive ford pass notifications saying your bronco is going into deep sleep and suggests you drive longer. I drove from CA up to UT and it only started working again on the return...
I have the Jtops as well as the soft top, I open the soft top and actually fold the Jtops all the way back on itself behind the front seats(does not hit your head at that point)then close the top. when needed I just open the top and fold the mesh forward and hook the hooks (after stretching the...
I get that the trolls get to you but a lot of your focus was just feeding the trolls. You know the situation and should not have to explain your actions. Stop feeding the trolls!
Tried 3 different light bars and 4 mounts and could never resolve the flapping, Ended up just calling it and working on a bumper light set up In conjunction with my 4 pods at the A pillar. What i am saying is Sans Hardtop there is no fix!
I fear the 37"S with the Hoss 1.0. I am running 2" of lift and Goodyear Duratracs in 35"s and have had no issues with the M190 or the Tie rod ends (But I carry spares and tools) while wheeling. I was going to go to 37"s if I could find a set no heavier than the Goodyear's but there is still...
Wow I'm sad really was hoping to meet some fellow 6G guys and gals but seems overwhelmingly negative. I had only heard of Paul not attending (I did find that odd that he and the wife recorded that) I was thinking it was because the "You Tuber" format that drove Paul away.
As the title says. I am headed out from CA on the 13th will be there all three days, was wondering if any 6G peeps were going as well? Maybe meet up and hang out together (riding solo personally)
Wish I would have seen this around Black Friday, I will be getting the Ditch Light set for sure but I kinda blew my shopping budget this month and Paying a bucket of taxes, Maybe Mid March!
Its been some time since I updated here, but I went with the Switch Pros SP9100 8 switch system and mounts. Far happier and it was only $600 and installed myself!
The three different light bar/Mount combos I tried for my windshield. First claimed it was for a 40" (it was not) Second also claimed it was 40" it was actually 44" (spacers worked but looked dumb)
The third one was the best from Quake LED and allowed a 40" plus two 3" pods on the sides Worked...
Seals are one of those items that are normally highlighted if they are covered or not, it IS a power-train issue if it is a leaking rear main and should be covered under the 5/60, but if its a seal they can refuse it.
If you are still under warranty I would take it in, in some cases maybe most seals are not covered. your first pic looks to show the oil is leaking from above and running down. Check the top of the motor towards the back and the valve cover gaskets and see if you have any oil leaks there. My 07...
Not sure if the 3 screws in the fuse box hold the plugs in from the bottom but I think after checking your grounds it would be worth it to make sure the plugs in the bottom of the fuse box are tight maybe even unplug then plug them back in. look at the pins as well and make sure none are...
Hey Chris how about control arm skids as well (Frame mounts that hang down) I have yet to install the parts I picked up from you at the Expo, never seem to have the time. maybe its time to pay someone to do it for me!!!