Sponsored

Search results

  1. MIC Hard Top Wind Noise Reduction - 2023 Edition - Plus Bonus Fix for Bad Adhesive

    Car Door Seal Strip,Universal Car Truck Motor Rubber Seal Strip,Weatherstrip for Car Window Door Sunroofs Engine Cover Soundproofing,Total 33Feet Long(2 Rolls of 16.5 Ft Long) https://a.co/d/idAs3gW
  2. Turn signal stopped working. Stumped.

    I ended up getting a similar resistor from Amazon and cut the old one out and redid the wiring with a better connector. Everything is working properly ATM. I'll keep an eye on it but hopefully the short was just me being sloppy with the probes. The original resistor was what failed. I'll...
  3. Turn signal stopped working. Stumped.

    Guess I'll just put the OEM tails back in and get ready to take it to the dealership yet again. :(.
  4. Turn signal stopped working. Stumped.

    Ok. Checked it out a little more today. I couldn't find a short in any of my wiring or in the harness for the tail light. I think the code clearing when I removed the trailer wiring was just coincidence. When I was poking around today the code came back with nothing plugged in at all. I...
  5. Turn signal stopped working. Stumped.

    Definitely a short issue. Hooked up Forscan and saw it was disabled due to a short. Unhooked my trailer wiring pigtail and it went away. I'll dig into it more tomorrow.
  6. Turn signal stopped working. Stumped.

    Is this something I need to reset in Forscan? Maybe I shorted something?
  7. Turn signal stopped working. Stumped.

    The connector for the resistor (for non LED Broncos) is not sealed. If you have this one, put some dielectric grease on it (or maybe even cut it out and use a better connector).
  8. Turn signal stopped working. Stumped.

    Noticed today driving home from work that I was getting a fast flash on my right turn signal. When I got home everything was working, no lights out. I have Oracle flush mounts, and I read that some people had trouble with corrosion so I pulled it out and the connector for the resistor def had...
  9. Tons of noise in cold weather

    I was able to completely eliminate my cold weather whistles with some additional weather stripping on the top. It took some trial and error to find all the air leaks.
  10. Manual transmission scraping noise / grinding sound

    So we should just get ready to lemon law every MT sold?
  11. Manual transmission scraping noise / grinding sound

    Darn. I was hoping maybe they revised the parts again. The noise is embarrassing so I'm willing to take a shot with the TSB work.
  12. Manual transmission scraping noise / grinding sound

    When I picked mine up from being diagnosed the dealer mentioned the TSB had been updated from TSB 22-2371. Does anyone know anything additional about that? Edit: Is TSB 23-2019 the most recent?
  13. Manual transmission scraping noise / grinding sound

    It'll be a while. Their transmission tech is swamped apparently. A few months.
  14. Manual transmission scraping noise / grinding sound

    Dropped mine off tonight. Wish me luck.
  15. Subwoofer to aux switch

    I did with a little Kenwood under seat powered sub. No pops or blown fuses. Just temporary until I get some real subs wired in.
  16. MIC Hard Top Wind Noise Reduction - 2023 Edition - Plus Bonus Fix for Bad Adhesive

    I've got a whistle from my top when the temp gets low and it's windy. After jamming foam in random places I found it was the seal between the side of the passenger front removable panel and the area over the window. Going to try some weather strip along that spot. Think it should work.
  17. Is Anyone Actually Excited For The Cybertruck?

    I'm excited to see Musk go broke with his idiot decisions.
  18. Cybertruck only $68,890!

    Overpriced garbage. And I wouldn't touch anything that supports that loser Elmo.
  19. Manual transmission scraping noise / grinding sound

    Made an appointment to get mine looked at in January. Hopefully there are parts available then.
Top