Search results

Here is a CAD image of ours. Let me know if you have any questions. We incorporate a limit strap tab on the body also you can see in the CAD model. We also make a plus 3" per side wider front kit for the regular bronco's. Been in testing for too long but ready to release now. We will get...

Here are a couple of CAD screen shots for you. Does that get you what you need?

the regular bronco rear bump stop kit we made with the ADS bumps only (they have a 2.1" OD and its unique) and have an updated version coming out very soon for that which is adjustable and you can use any bump stop in that kit. Sorry for the confusion there.

In the drop down you can pick from the 3 brands.

you can just order the kit with FOX, KING, or ADS bumps on the website. there is a drop down box toward the bottom under the description text to pick which one you want.

no. I have the hypercoil springs on my Bronco Raptor right now. All good to work with those, and I would reccomend using this kit to get the limit strap addition when using the heavier springs. the top hats on the front shocks are similar to the F150 version and we have seen failures on those...

the front contacts sooner and helps dampen the up travel about 5 inches before bottom. the rear is more direct and only the last 2.5 inches of travel get the bump stop but due to the 1:1 ratio that rear bump provides more resistance. But we have found that the trails out here in Arizona you...

makes those starbucks parking curbs feel like nothing at all...... but seriously even on the dirt road / trails the bump stops make the ride much better.

Adding a bump stop just improves what is already very good. The Ford Engineers have some restrictions they have to live with in and sometimes that limits what they can do. I am willing to go out on a limb and say that if the suspension engineers had unlimited budget to go to market they would...

We have a rear kit for the reuglar bronco already. We have a front kit but I havent finished the stock lower arm parts for that front bump kit. Currently the front only works with our fabricated lower arm setup. But I will make the stock arm parts pretty soon to get the front on a regular...

Just released: New bump stop kits for the Bronco Raptor. Both front and rear kits got released today. Both kits use full size 2.5" diameter and 2.5" travel bump stops. Get the kit with your choice of Fox, King, or ADS bumps. These first to market kits can be ordered now. Front bump stop...

https://www.foutzmotorsports.com/cdn/shop/files/bronco-raptor-diff-skid_2048x.png?v=1690588976 here is an installed pic

tie rod length is different from Raptor and regular Bronco, but we have a billet tie rod kit for the regular bronco also that looks the same as the Bronco Raptor just a little shorter.

Are you working on a Bronco Raptor or Regular Bronco? and do you have any lift kit or anything on it to raise ride height?

We saw this on the F150 Raptors several times with the plastic trans pan. A good skid plate is absolutely a must. We even incorporate a steel cross member support to help the trans cross member as part of our skid plate kit that works great. Check it out...

I would think so. here are a few screen shots to help That is the HOSS version which is bigger and allows more room toward the front. From the bottom of the shock mount to the top of the bottom guard plate there is over 5/8" room so I think they should all fit with no problem. Does that help?

Either one should work with the Fox aftermarket shock. Both have room for the reservoir toward the bottom and the upgraded Fox shock is a remote resi so it doesnt take up that space on the lower side. The HOSS guard is a little bigger and the safe bet to make sure you have clearance for the...

you have to pull the bolts that hold the main shock mount on the rear axle so it may be hard to do without putting up on a lift or with more than one floor jack to jack up the body and let the axle droop out all the way.

We just got done test fitting our new Bronco Raptor rear shock skid kit. it was a little tricky to get something that works with the floating rear lower mount and would still be strong but I think we have something that will work great. Check it out. We are doing the first production run of...

We can make this kit for you with a Fox or King 2.0" diameter bump stop also if you wanted that. The ADS bump stop is 2.125" diameter so slightly larger for a little more help due to the bigger piston inside, but all 3 brands will get the job done. The kit includes the hydraulic bump stops...