I'm debating doing the same as the OP when it comes to wiring.
I'm running the Kicker Key with PlugNPlay harness and I'm still not 100% happy with it. I have 4" Kenwoods (21w RMS) in dash with 300hz bass blockers, & 4" Infinity Ref in Rear Pods. (FYI the kenwoods were an early cheap purchase...
Check out my post here and my Youtube video I made where I add wiring to tap the Factory Fog wire harness & add the OEM Fog swtich.
https://www.bronco6g.com/forum/threads/updated-fog-lights-added-and-connected-to-factory-connector.40448/post-2149966
Two other posts with more info/links...
Unfortunately, if you got the MOD bumper from the factory then there isn't a wire harness for the fog lights behind the bumper, **unless you have the front bumper sensors**. If you have the sensors, then you should have the fog light connections. If not, then you need to run wires from C203...
My 22 bronco 2.7 SAS was built beginning of September 2022. The Engine build code has 22 & 244. The Julian Date 244 is around Sept 1, 2022. So I guess mine is safe?
Only 2600 miles so far.
Looking to get rid of the last 3 Brackets I have left. If anyone wants them I will sell "2 for $25" *shipping is included. If you only want one then its $15 each now.
Message me to buy!
Anyone interested in the Brackets I made for my Fog Lights that mount on the MOD bumper? I can have them laser cut, bent, and powder coated.
Prob sell for $80 for a set maybe and that would include shipping.
Let me know if anyone is interested I will make a for sale post.
Looking to get rid of the last 3 Brackets I have left. If anyone wants one I will sell them at $20 each *shipping included.
*OR $30 for 2 Qty, shipping Included.
Message me to order!
Well my ocd made me re-ziptie the wiring for the fog lights. I noticed the heat coming from the intercooler so I moved the main harness splitup section where C192 would be right behind driver headlight. Also got some good pics behind the wheel well for anyone who wants to see more.
Yes I use the automatic on and use the fog button on factory switch to turn them on. I didn't change the forscan code to remember what last setting was. Once I turn the lights off completely the Fogs remain off once you turn the lights back on. I'm sure you can change that but I don't mind it.
You can Enable the Fogs to be on with just the Running Lights and even with them off I believe. If you see my install video I posted you will see them on with the DRL/running lights.
I forgot to see if my fogs will turn on with the main light switch off. I will have to check after work today.
If you watch my video I just posted on here yesterday from Youtube you will see where to Tap into the Factory Fog wires. I used *Posi-Taps* (See video at 0:44 secs) to tap the wires and wrapped them up in friction tape to keep them protected. I used a Blue Wire to the Factory Brown wire, and...
Thanks! Yeah the wheel well, just remove the fender flare, most of the push pins, and the wheel well bolts holding in the liner. I didn't totally remove it, just enough to pull it down to reach everything and I turned the wheel outside. I just worked the liner edging it out from the fender well...
Hey everyone! I finally installed my fog lights and wired them to the factory fog wires at C203 connector. Installed the factory dash switch with front fog light. I made custom brackets to mount inside the HD MOD bumper. Made my own custom harness too.
Check out my video on youtube below!
Hey everyone! I finally installed my fog lights and wired them to the factory fog wires at C203 connector. I made custom brackets to mount inside the HD MOD bumper.
Check out my video on youtube below! I note everything I used especially the lights.
PIAA Fog Lights I used via my Amazon link...
I've been so busy with work and other stuff this month etc. not had a chance to install yet. I have everything ready to go. I just need to make the mounts for the fog lights and hopefully I will get some time this weekend to wire/mount the fog lights. I already installed the oem switch with the...
See my post on page 63, links and pics available. There are other posts showing the rear fog wire is white/blue that goes to the rear as well. Everything is mentioned on here, just read and do the research. 👍
https://www.bronco6g.com/forum/threads/factory-fog-light-switch.22937/post-1872637