Sponsored

Search results

  1. My DIY Diff Drop

    Taking cues from all of those that have already paved this path, I dove in and booger welded a diff drop bracket that drops the front mounting location 1-1/2": The lowering bracket itself was relatively easy, but as has been clearly noted before, the upper frame bracket has a welded...
  2. My DIY Shopping Cart Defenders

    Pulled out the tube kinker and made some door ding protectors. Starbucks is hard on stuff...
  3. DIY Hidden Winch Mount v2.0

    Unlike the hidden winch mount I built for our '22 Badlands with the Lux package, our '22 Wildtrak has the High package which means no adaptive cruise and the winch could be mounted between the frame rails where it belongs (y) The previous owner of this WT had already installed a DV8 front...
  4. Gatorback Flaps, Step Rails, Sasquatch Flares

    Selling some stuff off of a '22 Wildtrak we just picked up: Gatorback mud flaps $500 for the set of (4) Unknown step rails: $100 Sasquatch flares: $100 All located in the Tri-Cities area 99352.
  5. BNIB J-Tops 4-door Mesh Bikini Jet Black

    Just like the title says, brand new just received about 3 weeks ago and never opened the box from J-Tops... Got an offer we couldn't refuse on the Bronco so it went down the road with a few brand new uninstalled parts sitting in the garage :rolleyes: $275, located in Richland/Pasco/Kennewick...
  6. Sand Hollow / Hurricane UT - Truck/Trailer Parking???

    Anyone have any insight on where out of towners can park trucks/trailers during a stint in the Sand Hollow/Hurricane Utah area? I know Moab has several places that cater to this sort of thing, but it's our first time to Sand Hollow... Appreciate any ideas!
  7. My A-Pillar Grab Handle v2.0

    After living with my first draft for a couple of months, it became apparent that the 3/4" tube I used was a little too small and was hard on the hands. Plus, I wasn't entirely happy with the lazy route I had taken in the overall design, and wanted something a little cleaner looking. For this...
  8. Washington 2022 Badlands 4-Door MIC 2.0, Lux

    2022 Badlands 4-door, 2.3L, automatic, Lux package, MGV interior, MIC 2.0 hardtop. Odometer currently reads 3,739 miles but I usually drive it a few miles every week. * ZONE combo lift * 37" BFG KO2 tires on 17x9 wheels with +18mm offset * ARB twin compressor on DIY underhood mount * Curt...
  9. NYE '22 Snow Run

    Nowhere near as much snow as we'd hoped given the winter storms that have been rolling through the region the past couple of weeks, but it sure beats sitting home on the couch anyway (y)
  10. Dealing With Feedback on GMRS??

    Took our first trip with the Midland MXT115 installed, and was disappointed to find that I'm getting feedback from my yellow bumper-mounted LED's. The LED's are wired to Aux 2, and the Midland is wired directly to the battery. Also get feedback from the ARB compressor, which is wired to Aux...
  11. Burrito Cooker via manifold cooking

    This was hilariously easy, and since it accepts disposable foils pans I can also use it for loose foods like pulled pork and taco meat :love:
  12. Spare Tire Strap Rack DIY Fabricated

    Yes this is essentially a knock-off of any of the commercially available solutions, but those also come with the "stupid tax" applied and at the end of the day, I was able to pull this off at a price point that is commensurate with what these really are; a couple ratchet straps and some scrap iron:
  13. My DIY A-Pillar Grab Handle Install

    I'm old and fat, and when Ford targeted the JL Wrangler platform as a direct competitor, they missed what is perhaps the single most important thing for old and fat guys like me... a proper grab handle to hoist myself in and out of the darn thing :( I get the side curtain airbags are for...
  14. Cold Weather Wheeling and Camping Trip w/ Jeep Buddies

    My buddy Jim and I are not often accused of making good life choices, and deciding to wheel and then camp in single-digit weather is yet another example of why that is true :ROFLMAO: I apologize for the gratuitous poser shot, but I've always loved this snarled old tree and have...
  15. Snow Wheeling With Bronco & Jeep 06 Nov 2022

    We finally got a little bit of the white stuff up above 4,000ft so we took a quick scouting trip to see what's what. The summit of Darland Mountain is about 6,900ft and the drifts were anywhere from 3-4' deep, but it was nominally only about 12-24" deep along the majority of the route. My...
  16. Addressing Rear Brake Line and Wheel Sensor Slack

    What are the common tips/tricks to address the rear brake lines and wheel sensor wiring after installing a lift? Most of the spacer kits (both perch collars and top hat spacers) just come with the spacers and some hardware, and the coilover replacement kits just have the new coilovers... Are...
  17. DIY Hidden Winch Mount

    As with all of my junk, nothing real exotic here just doing what I can to avoid the Bronco Tax:
  18. FS - Badlands Tires/Wheels

    Selling (4) tires and wheels from my 2022 Badlands. Tires are 285/70r17 BFGoodrich All-Terrain KO2 and wheels are Badlands Edition 17x8 +55 offset. Mounted/balanced and include TPMS and lug nuts. Tires have about 2,500 miles on them and one trip to the mountains. $1,200 for the set, should...
  19. DIY Cargo Organizer

    Pretty simple stuff here but thought I'd share in case anyone is looking for ideas or maybe if their particular stuff might fit or not. For reference I use an ARB 37qt fridge, the bins are Rubbermaid 8-gallon Action Packers, the toolbox is an old Craftsman that is roughly 17" x 9" x 9", and the...
Top