I used a piece of ABS I had laying around, but a cutting board would probably work.
There are a couple of holes already in the supports above the glovebox, I bolted through them. These pics aren't the easiest to see, but may be of help.
P.S. you may want to talk to a mod about moving this...
Thanks to this thread, I was able to plan ahead and avoid this problem. What I did was go buy 4 new bolts that were 2.5" long and cut the heads off of them, I would remove a bolt from the tailgate and thread in one of the new studs in it's place. Then after they were all in place, I just slid...
On my 22 Wildtrak, I had 20x10 -18 on 35x12.50's with my stock suspension. With normal on road driving they just touched the running board at full lock and were very close to the wheel well liner. I was able to modify the steps thanks to a post I found on here about swapping them side to side...
That's a valid argument, but from a different stand point, both of my wife's last 2 Yukon's had the factory 22's, both rode like a Cadillac that made my bone stock bronco wildtrack feel like an shitbox economy car (the Fox coilovers have improved it thankfully) , and neither Yukon in the...
I'm not scared, here's an older pic with stock wildtrak 2.0 suspension on 35x12.50's. 20x10 Weld Ledge 6 wheels. Hoping to go to 37's soon, but since it spends 98% of it's life on road, there is plenty of tire for my needs.
I stumbled on this one earlier today, but i haven't seen anything on it yet and I'm not brave enough to be a guinea pig at that price.
https://havocoffroad.com/p/havoc-california-brief-top/v/ford/bronco/2023/
I found in order to use the forward post, you need 2 of the half moon post in the back, because with ithe roll-n-jack pulled all the way to the back, the forward post just grabs the center latch point.
I do use the forward post for extra support, but only because my kids have been known to bump...
Like others, I have been disappointed in the available options for tonneau covers, so I finally took it upon myself to make my own. It is made of 5/8 plywood, some square aluminum stock on the underside for rigidity, a little body filler, wrapped in black marine grade vinyl, and held in place by...