Sponsored

Search results

  1. Super Clean GMRS Radio Install!

    The cooling fan is a 5 volt 35 mm fan ( you'll need longer screws) soldered and shrink wrapped to a USB-"C" pigtail. I slathered all of the connectors and mounting bracket with hot melt glue to keep any thing from vibrating apart...
  2. Sound deadening advice

    I wallpapered my two door with killmat. Doing a rear seat delete also. Tow inch riser for the four door security drawer in the back. I did not install any in the doors...yet.
  3. Audio upgrade now warning chimes are insane

    @BAD.LANDS Which Musway did you install? I just installed a Musway M6, Getting ready to tune the DSP
  4. Super Clean GMRS Radio Install!

    Sneak peak The Motorola MTX 575 will fit under the center console console directly behind the window switches, Just ensure it's 3/4" or so above the bottom of the storage console to clear the inverter that resides underneath the center console. Installed the 35mm fan to the GMRS Added the...
  5. Super Clean GMRS Radio Install!

    You could also power it though the delayed accessory circuit shown here. I plan on running a 12 gauge fused circuit directly from the battery to a relay triggered from the delayed accessory circuit. The power feed will also have a noise suppressor after the relay. I'll be powering both a HAM...
  6. MUSWAY 4 & 6 CHANNEL AMP WITH BUILT IN DSP .

    Does that harness allow for the dash speakers to be driven from a different channel than the kick panel speakers? Can the terminals on the white connector on the blue cable be shipped loose, allowing the blue cable to be cut to length?
  7. ARB Summit Front Bumper Experiences?

    Any photos on how it interfaces with the factory steel skid plate?
  8. Rear Locker not working due to solenoid

    Shame on me I never verified that my rear locker worked when I took delivery. :cry: I went to engage one of the goat modes and the rear locker error message displayed on the instrument cluster. Dealer is looking into part availability and advice from the Ford engineering representative. I'll...
  9. Chapman Of Horsham with @dealerinsider

    I took delivery of my 2 door Badlands on Friday Everything went smoothly, received all of the certificates. My second purchase from Chapman. Everyone was friendly and answered all of my questions.
  10. Chapman Of Horsham with @dealerinsider

    One of them is mine. Just waiting on PDI and OTD pricing. The first response from the dealer was invoice.....I'm gently requesting the 4 % below invoice and all other certificates and MOD discounts to be applied.
  11. 4/24/2023 Build Week

    Mine is a two door, so no seat belt recall
  12. 4/24/2023 Build Week

    Just Speculation....Dana rear axle poor quality welds. Replacing the rear axle assembly??
  13. 2021-2022 Bronco Brandmotion FullVUE Rear Camera Mirror FVMR-1120

    I read and re-read the post....I could not find explanation about any forward facing camera and specs of any forward facing camera. Does the kit have a forward facing dashcam? I would mainly want one for the dashcam aspect. A picture of the back side of the mirror would be nice.
  14. 4/24/2023 Build Week

    Stuck in production....no other information
  15. Chapman Of Horsham with @dealerinsider

    What is your build? Do you have Sasquatch or LUX?
Top