Also, as an FYI you can’t have just the front tube doors on. Because the tube is much thicker that the OEM sheet metal it interferes with the rear door opening.
It’s the camera angle. I was actually really pleased that the top line of the rear doors lines up with the body line on the fender. The lower bars are less great but I appreciate the minimalist approach.
And I'm completely satisfied. $329 after coupon for 4-door. https://www.amazon.com/Hooke-Road-Bronco-Doors-Tubular/dp/B0C4Y6HMZP
Install was pretty reasonable but they are finicky and you have to attach the hinges yourself. The include one page photocopy is useless but the QR code leads you to...
1. Yes. I fully seated all of my parts before installing.
5. I used this: https://www.mcmaster.com/2029N13/
Slit it and covered every bar so it was tight under the velcro.
7. I'm talking about flipping it forward and back. I initially had my pivots too tight (the plastic was deforming) and...
I've had mine for several months and will list a few tips:
Every strut I found that had a gap I unscrewed and reseated it correctly.
As mentioned pull down on the top with the hand cutout next to the latch. It will also loosen up a lot over time and by time I mean about a month.
The rear window...
The simple rule of thumb is if you care about reception don’t go with an aluminum one. You can get a copper coiled one covered in rubber at any auto parts store.
Side seams or the bottom rail? The bottom rail is picky about rocking into the correct slots. The sides just need to stretch. Nearly broke my fingers the first time.