OP
ZackDanger

ZackDanger

Badlands
Well-Known Member
First Name
Zack
Joined
Jul 8, 2020
Messages
3,460
Reaction score
14,087
Location
Massachusetts
Vehicle(s)
2014 Wrangler JKU
Clubs
 
  • Thread starter
  • Thread Starter
  • #91
I am not sure if anyone has mentioned this - but the 4 door top, a rear portion has always had 4 indents for the roof rack feet, even though Ford was only using the front 2. I was hoping to get another aftermarket bar back there to have a full-length rack. Make it easier to load a car top boat. I do not see hte indents in the pictures i n this thread.

1614005223546.png
The hard tops have little slits front and back on the sides, but I'm not sure we've seen any of the hard tops in real life from the top looking down... and aside from the single OBX Fishing concept, we've never seen anything attached to the rear of the 4-door hard top (and Ford was clear that the concept rack was not going to be produced).

I guess all that is to say: We don't have anything to actually suggest that it would be possible to attach a rack mounting point to the rear of the production 4-door hard top.

:/





Advertisement

 

rmc523

Wildtrak
Well-Known Member
Joined
Jan 14, 2020
Messages
1,529
Reaction score
2,607
Location
South Florida
Vehicle(s)
2009 Ford Flex; 2018 Mustang GT
Vehicle Showcase
2
Clubs
 
Much better product than clearlidz - JeeTop They have already confirmed that they will be producing similar product fitment for the Bronco including the discussed Gunner's Hatch.
Yeah, that product looks like it'd hold up better long term.

I am not sure if anyone has mentioned this - but the 4 door top, a rear portion has always had 4 indents for the roof rack feet, even though Ford was only using the front 2. I was hoping to get another aftermarket bar back there to have a full-length rack. Make it easier to load a car top boat. I do not see hte indents in the pictures i n this thread.

1614005223546.png
As pointed out, the one time we saw something on the back was that fishing concept, and they said they weren't going to produce that for some reason.
 

YEGDriver

Badlands
Active Member
Joined
Sep 1, 2020
Messages
41
Reaction score
67
Location
Edmonton, AB
Vehicle(s)
2017 Wrangler
Clubs
 
from the B&P, you can 360 view the interior. I looked up. This is 2dr version.
1614039438522.png
I looked at that also. That's what they tell us it'll be. What the reality will be who knows? Although if it is like in that picture it looks like you should be able to unlatch it, rotate it 90 degrees, and then bring it inside. As long as it's not too heavy or awkward.
 

Blue Bronco

Active Member
First Name
G
Joined
Dec 8, 2020
Messages
30
Reaction score
47
Location
Earth
Vehicle(s)
Boots
Clubs
 
Just grabbed this Modular Top picture from Build & Price, haven't seen it there before.


RF3_130E80EA-73B9-D367-2117-AB862117AB86.jpg
 
OP
ZackDanger

ZackDanger

Badlands
Well-Known Member
First Name
Zack
Joined
Jul 8, 2020
Messages
3,460
Reaction score
14,087
Location
Massachusetts
Vehicle(s)
2014 Wrangler JKU
Clubs
 
  • Thread starter
  • Thread Starter
  • #97
Too late to chg to modular? Wanted removable windows for the doggo!
As long as your order hasn’t had a VIN assigned and the actual build is scheduled, you can modify your order.

And as of this post, no one’s order falls into that category, so you’re still free to switch to the mod top!

(just remember that Mod top is “late availability, so if you were going to get your Bronco soon because of an early reservation, choosing Mod top could push your build later)
 
OP
ZackDanger

ZackDanger

Badlands
Well-Known Member
First Name
Zack
Joined
Jul 8, 2020
Messages
3,460
Reaction score
14,087
Location
Massachusetts
Vehicle(s)
2014 Wrangler JKU
Clubs
 
  • Thread starter
  • Thread Starter
  • #99
Those are real deal images. And yes, you could easily put the gunners hatch inside
@LEGEND are you about to confirm that the production mod tops have the smaller Gunners hatch as is shown in the B&P cgi and not the bigger hatch as shown in the Dealer’s playbook in the first post of this thread?
 

Aman

Badlands
Well-Known Member
First Name
Aman
Joined
Jul 6, 2020
Messages
509
Reaction score
1,793
Location
Northern NJ
Vehicle(s)
1998 BMW M3 (Track Car) & 2008 Nissan Armada
Those are real deal images. And yes, you could easily put the gunners hatch inside
@LEGEND are you about to confirm that the production mod tops have the smaller Gunners hatch as is shown in the B&P cgi and not the bigger hatch as shown in the Dealer’s playbook in the first post of this thread?
I think he just did. ;)
 

LEGEND

Well-Known Member
First Name
KC
Joined
Jul 8, 2020
Messages
1,745
Reaction score
4,261
Location
Motor city, Michigan
Vehicle(s)
2018 grand cherokee, 2002 e250 4x4,
@LEGEND are you about to confirm that the production mod tops have the smaller Gunners hatch as is shown in the B&P cgi and not the bigger hatch as shown in the Dealer’s playbook in the first post of this thread?
The gunners "hatch/hole" is used on the 2 door models on the MOD tops only
 

Advertisement





 


Advertisement
Top