⚡ Suma Mirrors ⚡ | Remove Blind Spots n' Anti-Glare

[huey]

ok thanks for posting your thoughts guys
going to install what was sent - they are definitely smoked more than blue, i was just not expecting such a dark mirror. My windows are tinted so yeah will see what its like

cheers

Sponsored

 

[PEGB]

ok thanks for posting your thoughts guys
going to install what was sent - they are definitely smoked more than blue, i was just not expecting such a dark mirror. My windows are tinted so yeah will see what its like

cheers

Please report back with your experience and if possible tint density.

 

[swamp2]

Traditionally, I adjust my mirrors angled "out" significantly. I care much more about blind spot elimination rather than seeing any of my own vehicle in the side mirros. I can typically adjust for a smooth transition, when a vehicle is overtaking me, between visible in rear view, then in the side mirror and into glancing view (no mirror), with NO blind spot.

However, with the large spare (I did get rid of the heinous 3rd tail brake light) and limited visibility from the rear view mirror, I'm not achieving an absolutely full blind spot elimination. I'm suspecting these will be a great upgrade and will solve the problem.

I'm particularly keen to hear from another Raptor owner or minimally someone who adjusts their mirrors similar to me to comment on blind spot elimination. Anyone? Thanks!

 

[Suma Performance]

@Suma Performance

I still have not received the 30% refund. Can you please check the status?

Order #13844

Thank you.

sorry about that! Just asked the team to process. It will take a few business days. and thanks for letting us know we missed this one.

 

[Suma Performance]

@Suma Performance

I still have not received the 30% refund. Can you please check the status?

Order #13844

Thank you.

sorry we missed this. Processed the refund today!

thanks for letting us know.

 

[Suma Performance]

I installed mine today. Probably the easiest upgrade I've done so far! I spent at most 30 minutes doing both similar to @thenewjs. The side visibility is so much much better now! Well worth the cost.

Thanks for the feedback!

 

[AndGerry]

(Sent an email on this earlier) I’m new at this and couldn’t get the blind spot connector off. Are there any intructions on this part of the install? The video in the website cuts off before the connectors are disconnected. I’m afraid pulling too hard will dislodge the wires instead. Thanks!

 

[Ibuprofen3293]

(Sent an email on this earlier) I’m new at this and couldn’t get the blind spot connector off. Are there any intructions on this part of the install? The video in the website cuts off before the connectors are disconnected. I’m afraid pulling too hard will dislodge the wires instead. Thanks!

It’s easier with 3 hands. You need to spread the two tabs away from the connector and then pull the connector.

 

[MichaelCar001]

Looks pretty interesting! Has anyone tried it? Do they have them for other car models?

 

[AndGerry]

It’s easier with 3 hands. You need to spread the two tabs away from the connector and then pull the connector.

Thanks, @Ibuprofen3293. I’ll try this when I get a chance. Unfortunately, I haven’t evolved sufficientlyfor a third hand so will see I can manage this…

 

[AndGerry]

It’s easier with 3 hands. You need to spread the two tabs away from the connector and then pull the connector.

@Ibuprofen3293 By any chance, would you have photos of how to disconnect and/or the name of the connector?

 

[bstottlemyer85]

@Ibuprofen3293 By any chance, would you have photos of how to disconnect and/or the name of the connector?

This could be helpful to you, I think:

https://www.bronco6g.com/forum/thre...ntegrated-led-ditch-lights.58635/post-1879501

 

[AndGerry]

This could be helpful to you, I think:

https://www.bronco6g.com/forum/thre...ntegrated-led-ditch-lights.58635/post-1879501

Thanks, Ben @bstottlemyer85. My worry was safely disconnecting the BLIS connectors and was looking for some detailed info. The info in your link may help me find it. Thanks again.

@Suma Performance Any help with this will be appreciated. Thanks!

 

[Suma Performance]

Thanks, Ben @bstottlemyer85. My worry was safely disconnecting the BLIS connectors and was looking for some detailed info. The info in your link may help me find it. Thanks again.

@Suma Performance Any help with this will be appreciated. Thanks!

Were you able to figure out? This customer video might help LINK

 

[rayofsi]

wondering if anyone else has an issue, was happily using these mirrors for about 18 months. out of the blue, i noticed i dont get blis warnings anymore. no errors... wondering if the mirror blis light died..

Sponsored