【New Product】MABETT Multi-color Interior Ambient Light Available Now! Only $149.99!

[Ninjak]

I also purchased one. Let me know how install goes. The difficult part on the video appears to be removal of the current part. I’ll add a cf overlay by the door trim to blend the cf look.

Sounds good. Let me know where you get that CF piece that is by the door. I am looking at buying a CF kit to help blend in some CF to the interior.

Sponsored

 

[zombie]

If only you could paint things that weren't the colour you like

(of course it can be argued, and I agree, that it should just have been made the same black as most of the interior trim)

 

[Ninjak]

If only you could paint things that weren't the colour you like

(of course it can be argued, and I agree, that it should just have been made the same black as most of the interior trim)

If I could, I would.! But my prowess is in the engine bay. I absolutely suck at painting, or any type of body work.

I will try some bits and see how it all turns out.

 

[zombie]

If I could, I would.! But my prowess is in the engine bay. I absolutely suck at painting, or any type of body work.

I will try some bits and see how it all turns out.

Could try vinyl wrap?

 

[Ninjak]

Could try vinyl wrap?

Naw, I will get some CF pieces from a local shop, and blend it together if I decide to keep it. It will be easy to follow the pattern, just copy what the BRaptor has, or even my GT500.

 

[TacosTuesday]

well there's already a handful of sellers on amazon selling this exact same product, there's some video reviews posted as well

 

[Ninjak]

So it came today, packaged nicely. Colour instruction booklet. Will see if I can put it on this eve.

 

[Ninjak]

So I have finished the installation. It was not difficult. I would say the hardest part was trying to get the 3 screws back in under the dash by the glove. It has a fuse linker with two fuses in it which replaces a 10amp fuse under the dash. The instructions were good, and had pics of everything. Also, I think an English speaker proofreads or writes them.

It came well-packaged and felt solid. The start-up runs through some different colour spectrum, then lands on the colour you selected. From fiddling with it, it has Badland Orange, Wildtrack Blue, Code Orange, White, Red, Purple, Green, and probably some more.

To spruce up I bought some Matt Black CF pieces to go along with the installation. I am pretty satisfied with the result. Pics below.

What you need to take apart. I did not take a pic of the writing....silly me. But I was racing the mosquitos.

This is it installed by itself. Not bad looking at all.

I then added a Matt CF piece to the radio bezel.

I then added a CF piece to the center console, along with the button filler.

All Tied together.

I am happy I bought the Matt Black CF. It seemed to blend better. I have a piece for the steering wheel, and for the front and rear door handles, but I held off putting them on. I like the silver on the steering wheel and the handles.

Overall it's a nice piece. I'm happy with it, did what I wanted, and spruced up the inside.

Update: Some pics will not post, forums keep saying it ran into a issue, at any rate, you get the picture. Lol

 

[Dbar3103]

I’m thinking about buying it and asking my local shop to install or install myself. It looks a little difficult. Wo

 

[Mabett]

Install video @Mabett ??

 

[Mabett]

Is that a water bottle it's balancing on in the one picture and mysteriously floating on the other end? Woooo (Say that in your best scary voice.)

OK Serious questions and comments.

1. Why the "4 x 4 Offroad" that's is printed across the front of it?
2. How many colors can you choose? or does it just cycle through some presets?
3. How about a black version for those who aren't into CF look?
4. Installation video would nice. Where is it wiring up to?
5. Please hire someone to proofread your installation instructions. The ones that came with your seat covers that I just put on my wife's bronco were horrible. My wife and I were laughing hard at times trying to "figure out" what they meant since half the time they don't make sense. Wrong words used a lot and the pictures are so small and faded that it's almost impossible to figure out what you're even looking at. I'd be willing to proof read and rewrite them for you for a trade... I'm sure we can work out an exchange.

1. The final version currently on sale does not include the letters.

2. 5 colors available, you can check the pic on Amazon.

3. Already in development

4.

5. We are currently working on it. The best way at this stage is to watch the installation video on my YouTube account.

 

[huey]

1. The final version currently on sale does not include the letters.

2. 5 colors available, you can check the pic on Amazon.

3. Already in development

4.

5. We are currently working on it. The best way at this stage is to watch the installation video on my YouTube account.

thanks for the update - keep us posted on the black version and if you are going gloss or matte or...?
I would be interested in a non glossy black version for sure

cheers

 

[Ninjak]

I’m thinking about buying it and asking my local shop to install or install myself. It looks a little difficult. Wo

It is not as hard as it seems. As I said before, or at least I think I said this, the hardest part for me and my giant meathooks was trying to get the 3 bolts back in that go under/above the glove box. I do not fit well in some places, so it was a feel it moment.

Also having a pry tool, like those plastic ones for interior or radio installs is helpful as my panels were put together by the Tuesday guy who was going above and beyond.

The wire part, easy. I even went the extra mile to wrap my wires and run them in a way to the fuse so they would not just hang if I were to open that part again and trust me I am no electrical guy.

 

[CarmeloS]

I'd probably pick it up if it weren't carbon fiber. Looks a lot better than the Oracle dash kit that was an utter disappointment.

Don't remind me about that. Great in theory, but not bright enough and the fiber optics I gotta keep putting back into place when I don't look for glue or tape

 

[rpaluch1]

Sounds good. Let me know where you get that CF piece that is by the door. I am looking at buying a CF kit to help blend in some CF to the interior.

I installed the

Sounds good. Let me know where you get that CF piece that is by the door. I am looking at buying a CF kit to help blend in some CF to the interior.

I installed the Mabett piece today. Took about 2 hours start to finish. Installation wasn’t bad but had to find a few UTube videos on disassembly of the center area ( heat and air controls) as the instructions skipped that part. The CF look is fine to me and the lighting is a nice touch. I purchased a couple of CF overlays from Tuffskinz for the front doors that are at eye level and make the Mabett CF blend a bit better. I’ll add some pics of the interface when the overlays show up. Here’s a pic of the finished install.

Sponsored