🆕 2021-2023 Bronco Top Rail PPF (4 Door)

[LuisF.Recio]

If you have the 4-door hardtop and have ever removed the top panels, you know how difficult it is to do without rubbing the painted rails. There's a fix for that!

These computer cut templates will offer the protection will keep your factory paint fresh underneath. And, with the self-healing and scratch-resistant properties of PPF, it will keep that look for years to come.


Kit comes as a set of (4), two pieces per side. Obviously, this is for 4-door only.



PLEASE NOTE: RED AREAS are for demonstration purposes only, actual Xpel PPF is CLEAR!

Bronco Top Rail PPF







For more information or questions, please don't hesitate to contact us

Phone: 713.783.4739
Email: [email protected]

Sponsored

 

[Wathoff24]

I haven't really noticed a problem yet. However, your template looks like it is for '21-'23 models only since '24 models have 2 top bolts per side with corresponding longer bolt plate .

 

[LuisF.Recio]

I haven't really noticed a problem yet. However, your template looks like it is for '21-'23 models only since '24 models have 2 top bolts per side with corresponding longer bolt plate .

Thanks for the heads-up comment. Really appreciate it.

We hasn't seen the new 2024 Bronco top roof rail bolt set-up (yet) but we are working on it as I post this comment.

 

[mjp2]

Thanks for the heads-up comment. Really appreciate it.

We hasn't seen the new 2024 Bronco top roof rail bolt set-up (yet) but we are working on it as I post this comment.

Holy crap you guys are on top of things!
"*This is for 21-23 models only. Our understanding is the 24's have updated longer bolt plates, once we get one in, we can adjust for this."
https://www.undergroundgraphics.com/products/bronco-top-rail-ppf-4-door

 

[cgv]

Would be good to have it extend around the hardtop rear shell bolts to the top rail to protect from the bracket. My paint has chipped from the edge of that bracket.

 

[Underground Graphics]

Would be good to have it extend around the hardtop rear shell bolts to the top rail to protect from the bracket. My paint has chipped from the edge of that bracket.

Ours has too, but with metal on it, I think it would quickly end up cutting through the PPF. However, we will make an extension piece, and just include a small patch. Our design was for the front and mid panels, not for the rear shell, but nothing wrong with an extension piece!

Greg

 

[Dantastic]

Holy crap you guys are on top of things!
"*This is for 21-23 models only. Our understanding is the 24's have updated longer bolt plates, once we get one in, we can adjust for this."
https://www.undergroundgraphics.com/products/bronco-top-rail-ppf-4-door

I think they need a, “Per @mjp2 on Bronco6g” added to that statement

 

[Dantastic]

Have you considered doing black instead of clear? I think it’d look slick.

 

[mjp2]

I think they need a, “Per @mjp2 on Bronco6g” added to that statement

lol I'm not about to steal @Wathoff24 's thunder

 

[LuisF.Recio]

Have you considered doing black instead of clear? I think it’d look slick.

We have the template. We can do vinyl as well if interested

 

[618TRVLWILD]

We have the template. We can do vinyl as well if interested

Mind asking Jason if he got my email about some custom things. Just wanted to make sure it made it and I didn’t type the email wrong! It come from Ashley E! Thank you!!

 

[LuisF.Recio]

Mind asking Jason if he got my email about some custom things. Just wanted to make sure it made it and I didn’t type the email wrong! It come from Ashley E! Thank you!!

Will do and will be back with you as soon as possible.

Luis

 

[618TRVLWILD]

Will do and will be back with you as soon as possible.

Luis

Thank ya! You the best!!!

 

[LuisF.Recio]

Thank ya! You the best!!!

conversation sent.

Sponsored