- First Name
- Havoc
- Joined
- Jun 3, 2022
- Threads
- 11
- Messages
- 38
- Reaction score
- 128
- Location
- Buford, GA
- Vehicle(s)
- 2022
- Your Bronco Model
- Badlands
Hey All!
Here to answer a few questions.
The bumper on the SEMA 2-door Bronco is the Steel Bender Winch Ready Front Bumper. More info on that can be found HERE. We also have a quick video feature on this bumper at SEMA which can be found HERE. An Install Guide for this specific part number can be found at the info link above, but unfortunately we do not have an install video for this part at this time. Hoping to get one soon! A standard thin 20” lightbar fits into the over-rider, (however, we can NOT confirm EVERY 20” lightbar on the market will fit). This particular bumper has the winch plate included. A winch will mount like any other winch with 4 bolts up from bottom. We mounted a 12k winch without issues (again, can not confirm EVERY winch on the market will mount). The bumper works with both OE options of metal skid plate AND plastic air dam.
The soft top is a TrailView Fastback Soft Top from Rampage. This is set to launch within the next month or so. It will be available for 2-door or 4-door models. The top was unlatched in the posted photos, hence it's loose look. Rest assured, this top has the same quality as you are used to with Rampage Products.
The Fender Flares are from Havoc Offroad and are set to be released in late-spring, early-summer. They provide 3"-4" of tire coverage, which is a little less than the OE flares provide. Black hardware will be an option.
The Havoc Offroad HD Tire Carrier for the Bronco is also set to be released in late-spring, early-summer. It will come with two components with an option to purchase just the hinge, just the wheel mount, or both kitted together. You MAY be able to mount a license plate on the "mesh panel" but it isn't something that we are recommending.
What else have you got? Hope this helps!
Here to answer a few questions.
The bumper on the SEMA 2-door Bronco is the Steel Bender Winch Ready Front Bumper. More info on that can be found HERE. We also have a quick video feature on this bumper at SEMA which can be found HERE. An Install Guide for this specific part number can be found at the info link above, but unfortunately we do not have an install video for this part at this time. Hoping to get one soon! A standard thin 20” lightbar fits into the over-rider, (however, we can NOT confirm EVERY 20” lightbar on the market will fit). This particular bumper has the winch plate included. A winch will mount like any other winch with 4 bolts up from bottom. We mounted a 12k winch without issues (again, can not confirm EVERY winch on the market will mount). The bumper works with both OE options of metal skid plate AND plastic air dam.
The soft top is a TrailView Fastback Soft Top from Rampage. This is set to launch within the next month or so. It will be available for 2-door or 4-door models. The top was unlatched in the posted photos, hence it's loose look. Rest assured, this top has the same quality as you are used to with Rampage Products.
The Fender Flares are from Havoc Offroad and are set to be released in late-spring, early-summer. They provide 3"-4" of tire coverage, which is a little less than the OE flares provide. Black hardware will be an option.
The Havoc Offroad HD Tire Carrier for the Bronco is also set to be released in late-spring, early-summer. It will come with two components with an option to purchase just the hinge, just the wheel mount, or both kitted together. You MAY be able to mount a license plate on the "mesh panel" but it isn't something that we are recommending.
What else have you got? Hope this helps!
Sponsored