2021 Badlands Build - Tons of Mods from BroncBuster and More

[Eric L]

@txbroncbuster Hoss 3.0 steering rack, bronc bushing, rack housing, dana 60 rear end, Advantek ultimate dana 44 FDU, DanaSpicer extreme CV shafts, Tibus portals. Such a great company with incredible customer service
@danaincorporated
@tibususa portals
@DV8offroad winch bumper, 12,000 lb winch, rear bumper and spare tire delete kit
@OracleLights flush mount taillights
@mickeythompsontires 40x13.50 R17 Baja Boss M/Ts
@americanventurelab drawers and fridge slide. Awesome Quality!
@pandamotorworks
@roushperformance CAI
@flowmaster_official American Thunder exhaust system
@fox 2.5 elite coilovers
@arb4x4usa dual compressor mounted in the engine bay
@morrflate inflation/deflation hose kit
@impulseoffroad for installation of the suspension, bumpers and some lighting
@ivdsuspension billet upper control arms
@fabtech_motorsports rear links
@lod_offroad frame mounted sliders
@sexton_offroad for UCA insllation and lending a bay to Tyler Mason for the portal installation. Such great people!
@utahbroncoclub all my local peeps!
@poshbyconniejo – my wife who has graciously let me pursue this expensive hobby

Sponsored

 

[ORACLE Terry]

@txbroncbuster Hoss 3.0 steering rack, bronc bushing, rack housing, dana 60 rear end, Advantek ultimate dana 44 FDU, DanaSpicer extreme CV shafts, Tibus portals. Such a great company with incredible customer service
@danaincorporated
@tibususa portals
@DV8offroad winch bumper, 12,000 lb winch, rear bumper and spare tire delete kit
@OracleLights flush mount taillights
@mickeythompsontires 40x13.50 R17 Baja Boss M/Ts
@americanventurelab drawers and fridge slide. Awesome Quality!
@pandamotorworks
@roushperformance CAI
@flowmaster_official American Thunder exhaust system
@fox 2.5 elite coilovers
@arb4x4usa dual compressor mounted in the engine bay
@morrflate inflation/deflation hose kit
@impulseoffroad for installation of the suspension, bumpers and some lighting
@ivdsuspension billet upper control arms
@fabtech_motorsports rear links
@lod_offroad frame mounted sliders
@sexton_offroad for UCA insllation and lending a bay to Tyler Mason for the portal installation. Such great people!
@utahbroncoclub all my local peeps!
@poshbyconniejo – my wife who has graciously let me pursue this expensive hobby

Wow! That's a great looking and powerful build.

 

[Eric L]

Wow! That's a great looking and powerful build.

Thanks!

 

[Noremac]

Thanks for the recipe.. I may end up following suit with mine some day soon..

We need more photos though!

 

[JerryG]

Were you able to use the 74" with the portals or have to stick to the 69"?

 

[Eric L]

Thanks for the recipe.. I may end up following suit with mine some day soon..

We need more photos though!

I'll try to upload more...it's difficult on the phone for some reason

 

[Eric L]

Were you able to use the 74" with the portals or have to stick to the 69"?

Are you talking about the Dana 60? I believe it's stock width. I have a ton of poke right now with +30 offset sasquatch wheels. I'm putting on a set of +70 offset wheels to bring the wheels in a bit

 

[JerryG]

Are you talking about the Dana 60? I believe it's stock width. I have a ton of poke right now with +30 offset sasquatch wheels. I'm putting on a set of +70 offset wheels to bring the wheels in a bit

My goal is to stay as narrow as possible so I went with the same Dana stuff but decided against portals for that reason. My 38x12.5" Nittos don't poke out at all beyond the sasquatch fenders.

 

[5GENIDN]

@txbroncbuster Hoss 3.0 steering rack, bronc bushing, rack housing, dana 60 rear end, Advantek ultimate dana 44 FDU, DanaSpicer extreme CV shafts, Tibus portals. Such a great company with incredible customer service
@danaincorporated
@tibususa portals
@DV8offroad winch bumper, 12,000 lb winch, rear bumper and spare tire delete kit
@OracleLights flush mount taillights
@mickeythompsontires 40x13.50 R17 Baja Boss M/Ts
@americanventurelab drawers and fridge slide. Awesome Quality!
@pandamotorworks
@roushperformance CAI
@flowmaster_official American Thunder exhaust system
@fox 2.5 elite coilovers
@arb4x4usa dual compressor mounted in the engine bay
@morrflate inflation/deflation hose kit
@impulseoffroad for installation of the suspension, bumpers and some lighting
@ivdsuspension billet upper control arms
@fabtech_motorsports rear links
@lod_offroad frame mounted sliders
@sexton_offroad for UCA insllation and lending a bay to Tyler Mason for the portal installation. Such great people!
@utahbroncoclub all my local peeps!
@poshbyconniejo – my wife who has graciously let me pursue this expensive hobby

Those Fabtech arms are showing some pretty impressive articulation. I assume they are running johnny joints at both ends?

Very nice build. All that clearance is pretty nice isn't it?

 

[Eric L]

Those Fabtech arms are showing some pretty impressive articulation. I assume they are running johnny joints at both ends?

Very nice build. All that clearance is pretty nice isn't it?

Not sure about the joints...I've never looked . The clearance is impressive...last time out at Sand Hollow in January I think we touched skid plated once out of 2 different 7 rated trails

 

[5GENIDN]

Not sure about the joints...I've never looked . The clearance is impressive...last time out at Sand Hollow in January I think we touched skid plated once out of 2 different 7 rated trails

Yes... Kind of like hitting the "easy button".... I love it.

 

[Eric L]

Yes... Kind of like hitting the "easy button".... I love it.

Sorry typo...we did 3 trails in January

 

[Felix808]

$$$$$$.

 

[Eric L]

$$$$$$.

Sadly....yes. and I didn't plan to do any of this...I just kept wanting better clearance so this is my 3rd lift.

 

[Felix808]

Sadly....yes. and I didn't plan to do any of this...I just kept wanting better clearance so this is my 3rd lift.

And down the rabbit hole you went. Enjoy

Sponsored