Sponsored

2021 Bronco Wiring Diagrams - NEEDED

FireResQ282

First Edition
Member
First Name
Keith
Joined
Nov 2, 2021
Threads
2
Messages
8
Reaction score
1
Location
New Jersey
Vehicle(s)
Ford bronco 2021 first edition
Your Bronco Model
First Edition
Is there something specific I can find for you?
I saw your post of the wiring diagram for the rear led tail lights. But I’m trying to see the pin out for the 6 wire connector. Any thoughts ? I’m trying to wire in
im looking for the pin out for the rear led taillights. I installed a xglow spare tire brake light and need to wire it into the tail lights but I am not sure what wire goes to what , need left turn right turn backup power ground etc. from the 6 pin connectors on both sides. I do not have a tow kit to wire it in to.
Sponsored

 

flip

Badlands
Well-Known Member
Base Sponsor (Level 1)
First Name
Phil
Joined
Jul 21, 2020
Threads
41
Messages
4,242
Reaction score
14,103
Location
IN
Website
www.ruxerparts.com
Vehicle(s)
Fords
Your Bronco Model
Badlands
Clubs
 
Ford Bronco 2021 Bronco Wiring Diagrams - NEEDED 1664795038218


Left inside connector
Ford Bronco 2021 Bronco Wiring Diagrams - NEEDED 1664795087711

Ford Bronco 2021 Bronco Wiring Diagrams - NEEDED 1664795112105


Right inside connector.
Ford Bronco 2021 Bronco Wiring Diagrams - NEEDED 1664795158689

Ford Bronco 2021 Bronco Wiring Diagrams - NEEDED 1664795186317


C414, left outside connector behind tail light.
Ford Bronco 2021 Bronco Wiring Diagrams - NEEDED 1664795222416


C415, right outside connector behind tail light.
Ford Bronco 2021 Bronco Wiring Diagrams - NEEDED 1664795259425
 

FireResQ282

First Edition
Member
First Name
Keith
Joined
Nov 2, 2021
Threads
2
Messages
8
Reaction score
1
Location
New Jersey
Vehicle(s)
Ford bronco 2021 first edition
Your Bronco Model
First Edition
1664795038218.png


Left inside connector
1664795087711.png

1664795112105.png


Right inside connector.
1664795158689.png

1664795186317.png


C414, left outside connector behind tail light.
1664795222416.png


C415, right outside connector behind tail light.
1664795259425.png
Thank You , question, might be a dumb one, but which wire would be the appropriate one to tap into on the turn signal harness for a reverse light? The Xglow spare tire brake light and the appropriate one for turn signal?
 

Dan-O83

Badlands
New Member
First Name
Dan
Joined
Jul 27, 2023
Threads
0
Messages
4
Reaction score
0
Location
Oklahoma
Vehicle(s)
22 Bronco/67 GTO
Your Bronco Model
Badlands
Flip,

I am trying to hard wire in a radar detector and need 12v ignition power. Am I understanding this screenshot correctly that it should be the white wire plugging into my mirror? I tapped into the white wire and grounded against the frame above the aux switches but have no power to the unit when the vehicle is running.
 

flip

Badlands
Well-Known Member
Base Sponsor (Level 1)
First Name
Phil
Joined
Jul 21, 2020
Threads
41
Messages
4,242
Reaction score
14,103
Location
IN
Website
www.ruxerparts.com
Vehicle(s)
Fords
Your Bronco Model
Badlands
Clubs
 
Flip,

I am trying to hard wire in a radar detector and need 12v ignition power. Am I understanding this screenshot correctly that it should be the white wire plugging into my mirror? I tapped into the white wire and grounded against the frame above the aux switches but have no power to the unit when the vehicle is running.
That's the way I'm reading it. I assume you checked to make sure the fuse is good? If so, do you have power there when your headlights are on?
 

Sponsored

sportcoupe

Wildtrak
Well-Known Member
First Name
John
Joined
Jul 16, 2023
Threads
20
Messages
260
Reaction score
212
Location
Georgia
Vehicle(s)
2023 Bronco
Your Bronco Model
Wildtrak
Save yourself the dough...get a 72-hr subscription to the digital service manual for $22 and spend a weekend "printing to PDF" everything you want/ need/ etc.

https://www.motorcraftservice.com/
Are the drawings and data in pdf form (by section) from that subscription? I assumed the data was web based and not easily saved.
 

RagnarKon

Badlands
Well-Known Member
First Name
Bryan
Joined
Aug 5, 2021
Threads
34
Messages
4,764
Reaction score
12,262
Location
New England
Vehicle(s)
Ford Bronco, Escape, Focus
Your Bronco Model
Badlands
Clubs
 
Are the drawings and data in pdf form (by section) from that subscription? I assumed the data was web based and not easily saved.
They are indeed web-based. You can print them to a PDF though if you want.

Alternatively, you skip the subscription and just order the wiring diagrams from Helm.
 

Dan-O83

Badlands
New Member
First Name
Dan
Joined
Jul 27, 2023
Threads
0
Messages
4
Reaction score
0
Location
Oklahoma
Vehicle(s)
22 Bronco/67 GTO
Your Bronco Model
Badlands
That's the way I'm reading it. I assume you checked to make sure the fuse is good? If so, do you have power there when your headlights are on?
checked the fuse and no joy tried with lights on auto, parking, and full on.
 

BeerRunner

Badlands
Well-Known Member
First Name
LUKE
Joined
Oct 24, 2021
Threads
18
Messages
255
Reaction score
509
Location
Blythewood, SC
Vehicle(s)
2023 Bronco
Your Bronco Model
Badlands
Clubs
 
Anyone have one for the tailgate? Looking for a constant on for license plate lights in the gate
Ford Bronco 2021 Bronco Wiring Diagrams - NEEDED IMG_0760
 

evilletruck

Black Diamond
Well-Known Member
First Name
Bill
Joined
Jul 5, 2021
Threads
8
Messages
245
Reaction score
789
Location
Evansville IN
Vehicle(s)
2006 F350
Your Bronco Model
Black Diamond
Clubs
 
@flip or anyone else :)

i have been searching and this thread keeps popping up in my search, I am trying to find the wiring between the turn signal switch itself and the BCM, the one at the light already blinks ( cycles power on , and off, creating the blink ) which I assume is controlled in the BCM, but am looking for a constant power if signal is enabled. ( Hoping that the wire between the switch itself and the BCM carries constant and then the BCM tells it to pulse? )
 

Sponsored

evilletruck

Black Diamond
Well-Known Member
First Name
Bill
Joined
Jul 5, 2021
Threads
8
Messages
245
Reaction score
789
Location
Evansville IN
Vehicle(s)
2006 F350
Your Bronco Model
Black Diamond
Clubs
 
Anyone have one for the tailgate? Looking for a constant on for license plate lights in the gate
Ford Bronco 2021 Bronco Wiring Diagrams - NEEDED IMG_0760
I used the power and ground that were going to the original license plate light in OEM bumper and ran wire to relocated plate on tailgate.
 

evilletruck

Black Diamond
Well-Known Member
First Name
Bill
Joined
Jul 5, 2021
Threads
8
Messages
245
Reaction score
789
Location
Evansville IN
Vehicle(s)
2006 F350
Your Bronco Model
Black Diamond
Clubs
 
Silly Question time.. what is the GWM ?
 

PEGB

Badlands
Well-Known Member
First Name
Pete
Joined
Sep 1, 2023
Threads
6
Messages
155
Reaction score
194
Location
RI
Vehicle(s)
Eruption Green Badlands Sasquatch Hardtop 4 door
Your Bronco Model
Badlands
 


Top