37s fit well w/minor trimming and leveling kit

[BigMeatsBronco]

Picked up a set of 37x12.50R17 Maxis Trepador Radials. Sasquatch wheels.

These fit very well. No rubbing around town at stock Sasquatch height. Under full compression with swaybar disconnected, there is NO rubbing in the rear, however the front needed a bit of trimming in a few areas. An hour with angle grinder and some fresh paint and it's trimmed up enough for zero rubbing on the front with 1” leveling kit.

Sponsored

 

[cbrownabq]

Looks great

 

[Toccoa]

Looks better than I thought it would. Very clean.

 

[66GT]

Picked up a set of 37x12.50R17 Maxis Trepador Radials. Sasquatch wheels.

These fit very well. No rubbing around town at stock Sasquatch height. Under full compression with swaybar disconnected, there is NO rubbing in the rear, however the front needed a bit of trimming in a few areas. An hour with angle grinder and some fresh paint and it's trimmed up enough for zero rubbing on the front with 1” leveling kit.

Wow. Well done. That's a lot of wheel to be able to put on a stock rim with just a 1" leveling kit... with only minor trimming. I think we'll see a lot of Bronco owners following your lead.

 

[rguest3]

Wow! 37s with No rubbing (minor trimming, +1" up front) with the Sasquatch +30 offset wheels.

Would it not rub at all with a popular +18 or 0 offset wheel?

 

[Gtrekker]

Picked up a set of 37x12.50R17 Maxis Trepador Radials. Sasquatch wheels.

These fit very well. No rubbing around town at stock Sasquatch height. Under full compression with swaybar disconnected, there is NO rubbing in the rear, however the front needed a bit of trimming in a few areas. An hour with angle grinder and some fresh paint and it's trimmed up enough for zero rubbing on the front with 1” leveling kit.

Hey, that's the #1 question I get. "If 37" would fit on their non sasquatch edition".... I have a Wildtrak with 37" K02s.
Thanks for sharing....

 

[Richw23]

Wow! 37s with No rubbing (minor trimming, +1" up front) with the Sasquatch +30 offset wheels.

Would it not rub at all with a popular +18 or 0 offset wheel?

I would really
like to know the answer to that!

 

[1975U15]

 

[72BroncoSand]

Looks great from the outside! But what did you use to trim? Chainsaw?

 

[Boston182]

* cringe *

 

[Odd Ball]

Looks great from the outside! But what did you use to trim? Chainsaw?

Teeth…

 

[KaneNorth]

Teeth…

 

[Theherofails]

Looks great from the outside! But what did you use to trim? Chainsaw?

Dull beaver

 

[Deleted member 21681]

* cringe *

Hey, eyes on the tires, slick. Not polite to stare.

 

[cve]

Is the Trail Armor dealer installed?

Sponsored