37s fit well w/minor trimming and leveling kit

[goatman2]

Picked up a set of 37x12.50R17 Maxis Trepador Radials. Sasquatch wheels.

These fit very well. No rubbing around town at stock Sasquatch height. Under full compression with swaybar disconnected, there is NO rubbing in the rear, however the front needed a bit of trimming in a few areas. An hour with angle grinder and some fresh paint and it's trimmed up enough for zero rubbing on the front with 1” leveling kit.

The big question for me is what exactly did you do to fully articulate the suspension and turn the front wheels lock to lock to confirm that the tires didn't rub? It would be nice to see a pic of that, all flexed out. That means a ton more than driving around town and nothing rubbed. Where did you flex it out?

Sponsored

 

[Richw23]

Picked up a set of 37x12.50R17 Maxis Trepador Radials. Sasquatch wheels.

These fit very well. No rubbing around town at stock Sasquatch height. Under full compression with swaybar disconnected, there is NO rubbing in the rear, however the front needed a bit of trimming in a few areas. An hour with angle grinder and some fresh paint and it's trimmed up enough for zero rubbing on the front with 1” leveling kit.

do you think with the 1" zone offroad leveling kit and rims with a zero offset i wouldnt need to trim at all? thanks and it looks awesome!!!!!!!!!

 

[Jwall]

do you think with the 1" zone offroad leveling kit and rims with a zero offset i wouldnt need to trim at all? thanks and it looks awesome!!!!!!!!!

I have a feeling this will depend on the tire. Something like a 37” KO2 might have quite a bit of clearance, but a tire that measures true like a maxxis treppador might rub like crazy.

 

[BigMeatsBronco]

Wow! 37s with No rubbing (minor trimming, +1" up front) with the Sasquatch +30 offset wheels.

Would it not rub at all with a popular +18 or 0 offset wheel?

Offset will help up to about 1/2” mabey 3/4” max....others have tried 1” more and it starts to cause other issues with rubbing on the outside of the tire.

 

[BigMeatsBronco]

I have a feeling this will depend on the tire. Something like a 37” KO2 might have quite a bit of clearance, but a tire that measures true like a maxxis treppador might rub like crazy.

Agreed, but these are the Maxis Trepador Radials....Not the competition-off-road-only version.

 

[BigMeatsBronco]

Is the Trail Armor dealer installed?

No ,I stuck those on myself.

 

[Squatch]

Looks better than I thought it would. Very clean.

I need a video (like it's 2021) to really judge it, but looks decent.

 

[Toccoa]

I need a video (like it's 2021) to really judge it, but looks decent.

 

[BAUS67]

Offset will help up to about 1/2” mabey 3/4” max....others have tried 1” more and it starts to cause other issues with rubbing on the outside of the tire.

I was about to go there.

I just took stock wheels and tires off of a 22 Sierra 2500, 33" tall tires.

So I could put some brodozer 33's on it.

No rub going straight.

Turn the wheel however and it is not a good situation

Keep them tucked under the Bronc. It's wheel wells are HUGE.

 

[BAUS67]

I need a video (like it's 2021) to really judge it, but looks decent.

Just about to be 2022.

 

[Squatch]

Just about to be 2022.

It used to sound positive to talk about the new year, but now it's a bit ominous, lol. Maybe I'll want some more production value next year or should I be asking for a Tik Tok with someone dancing by their Bronco? Hahaha

Have a good new year @BAUS67

 

[BAUS67]

It used to sound positive to talk about the new year, but now it's a bit ominous, lol. Maybe I'll want some more production value next year or should I be asking for a Tik Tok with someone dancing by their Bronco? Hahaha

Have a good new year @BAUS67

I hear 'ya. I'll be here just counting down the days.

Merry Christmas and happy new year to you @Squatch

 

[BigMeatsBronco]

I was about to go there.

I just took stock wheels and tires off of a 22 Sierra 2500, 33" tall tires.

So I could put some brodozer 33's on it.

No rub going straight.

Turn the wheel however and it is not a good situation

Keep them tucked under the Bronc. It's wheel wells are HUGE.

Thanks for the pics, this is exactly what too much offset causes. These guy out there with tires that stick way out must be sawzalling shit ALOT! At least with big tire diameter.

 

[BroncoNapped]

Picked up a set of 37x12.50R17 Maxis Trepador Radials. Sasquatch wheels.

These fit very well. No rubbing around town at stock Sasquatch height. Under full compression with swaybar disconnected, there is NO rubbing in the rear, however the front needed a bit of trimming in a few areas. An hour with angle grinder and some fresh paint and it's trimmed up enough for zero rubbing on the front with 1” leveling kit.

What do you actually have to cut, the bumper bracket or frame?
Looks mean on 37s... Thanks

Sponsored