37x12.5x17’s on our 4” lift kit with -12 offset!

[Maxlider Brothers Customs]

We are getting lots of questions about tire and lift size as well as offsets for the new Bronco.

Here is our 4” Sasquatch lift kit (taking the factory 1.1” of SAS lift to almost 4” of total lift) with 37x12.5x17” BFG’s on our 17x9” Phantom wheels. PLENTY of clearance even with a -12 offset!!!

Also notice the full size matching 37” spare which just fits under the 3rd brake light…but super tight!

Parts Q&A:

- Lift kit availability: We should have our Sasquatch and non-Sasquatch lift kits available for purchase in 10-12 days. Both create right at 4” of total lift and include upper control arms. We will have limited supplies for the first run, so get on the preorder notification list by emailing: [email protected]

- Vintage Stripe: We finally have that available to purchase on our website at MaxliderBros.com inside the “Shop our Store” tab!

- YES, we have lots more parts launching the next 60-90 days! Light racks, side steps, front and rear bumpers, fender flares, performance upgrades, etc! Thanks for your support and encouragement on these!

Sponsored

 

[Apples]

What kind of lift are we talking about here? New coilovers, I assume? What brand did you go with? Is the UCA sufficient to get a good alignment or will it need adjustable cam bolts as well? How is the clearance and articulation with this setup? Any rubbing at full lock or contact with the wheel well at full stuff?

 

[De Brus]

$500 for the stripe kit are you offering any forum discount by any chance?

 

[Maxlider Brothers Customs]

What kind of lift are we talking about here? New coilovers, I assume? What brand did you go with? Is the UCA sufficient to get a good alignment or will it need adjustable cam bolts as well? How is the clearance and articulation with this setup? Any rubbing at full lock or contact with the wheel well at full stuff?

This is our own Stage 1 kit we have built together with our friends at BDS/Zone/Fox. The 4” Stage 1 kit will be available first and includes upper control arms and spacers which use the stock struts.

The Stage 2 kit will be available later in Q4 or Q1 2022 and will include Fox coil overs front and back!

No rubbing with the above wheels/tires (crash bars removed by Ford because this one is a Sasquatch). It is VERY easy to align!

 

[Hopeless Diamond]

$500 for the stripe kit are you offering any forum discount by any chance?

Maybe that's an installed by Vestal Virgins price?

 

[Apples]

This is our own Stage 1 kit we have built together with our friends at BDS/Zone/Fox. The 4” Stage 1 kit will be available first and includes upper control arms and spacers which use the stock struts.

The Stage 2 kit will be available later in Q4 or Q1 2022 and will include Fox coil overs front and back!

No rubbing with the above wheels/tires (crash bars removed by Ford because this one is a Sasquatch). It is VERY easy to align!

Thanks. With todays news, who knows when I'll have a vehicle to even put this stuff on, but what you're putting together for Stage 2 is basically what I'm looking to do.

 

[Maxlider Brothers Customs]

Thanks. With todays news, who knows when I'll have a vehicle to even put this stuff on, but what you're putting together for Stage 2 is basically what I'm looking to do.

It’s going to be a sick lift with Fox coil overs! We also have a Stage 3 kit coming with 6” of total lift!

 

[peterh]

We are getting lots of questions about tire and lift size as well as offsets for the new Bronco.

Here is our 4” Sasquatch lift kit (taking the factory 1.1” of SAS lift to almost 4” of total lift) with 37x12.5x17” BFG’s on our 17x9” Phantom wheels. PLENTY of clearance even with a -12 offset!!!

Also notice the full size matching 37” spare which just fits under the 3rd brake light…but super tight!

Parts Q&A:

- Lift kit availability: We should have our Sasquatch and non-Sasquatch lift kits available for purchase in 10-12 days. Both create right at 4” of total lift and include upper control arms. We will have limited supplies for the first run, so get on the preorder notification list by emailing: [email protected]

- Vintage Stripe: We finally have that available to purchase on our website at MaxliderBros.com inside the “Shop our Store” tab!

- YES, we have lots more parts launching the next 60-90 days! Light racks, side steps, front and rear bumpers, fender flares, performance upgrades, etc! Thanks for your support and encouragement on these!

please consider a modern take on a classic looking bumper set!
something like this in a color that matches the carbonized grey trims (painting black or white is simple enough or having it chromed)

 

[dweskamp]

It’s going to be a sick lift with Fox coil overs! We also have a Stage 3 kit coming with 6” of total lift!

Where are you guys located? I don't want just any shop messing with my badsquatch.

 

[Maxlider Brothers Customs]

Where are you guys located? I don't want just any shop messing with my badsquatch.

Bloomington, Illinois.

 

[dweskamp]

Bloomington, Illinois.

6 hours I'm in sw Missouri

 

[edgeflyer]

Can you straighten the tires and camera and repost?

 

[Maxlider Brothers Customs]

Can you straighten the tires and camera and repost?

I will try to get some additional photos and video when it stops pouring on us in Illinois later this week

 

[7.3ltr bronco]

Are these made for 2 door also? I figure they will work for both.

 

[MaverickMan]

Thats awesome. I even love how the soft top flows with the stripes and kindof looks like a batmobile spoiler of sorts. Just looks heroic.

I will note however that the tiny bit of dirt has already completely caked the tread of those BFG ATs. I dont even know why they make em that big. They are barely good enough for an old subaru. Put some TSLs or Boggers on that beast!

Sponsored