Sponsored

37x12.5x17’s on our 4” lift kit with -12 offset!

Gatehouse

Outer Banks
New Member
First Name
Gate
Joined
Oct 13, 2021
Threads
0
Messages
3
Reaction score
3
Location
Huntsville
Vehicle(s)
Ford Bronco
Your Bronco Model
Outer Banks
ABFB6E54-9F31-4F50-8AD4-0FC5513C8CB6.jpeg
846F6DCE-3659-4CFF-A177-9AFCB2E50DFF.jpeg
4B0E7186-A420-4C09-B023-1FD729AC3B7D.jpeg
6D27E332-A1E5-4C94-B835-62D78B003A55.jpeg


We are getting lots of questions about tire and lift size as well as offsets for the new Bronco.

Here is our 4” Sasquatch lift kit (taking the factory 1.1” of SAS lift to almost 4” of total lift) with 37x12.5x17” BFG’s on our 17x9” Phantom wheels. PLENTY of clearance even with a -12 offset!!!

Also notice the full size matching 37” spare which just fits under the 3rd brake light…but super tight!

Parts Q&A:

- Lift kit availability: We should have our Sasquatch and non-Sasquatch lift kits available for purchase in 10-12 days. Both create right at 4” of total lift and include upper control arms. We will have limited supplies for the first run, so get on the preorder notification list by emailing: [email protected]

- Vintage Stripe: We finally have that available to purchase on our website at MaxliderBros.com inside the “Shop our Store” tab!

- YES, we have lots more parts launching the next 60-90 days! Light racks, side steps, front and rear bumpers, fender flares, performance upgrades, etc! Thanks for your support and encouragement on these!
I'm curious on what your thoughts are for even larger rims and offset? I was thinking about 20x10 -24 on 35" Nitto's on mine......this kind of makes me want to go larger (I have the same color Bronco, so good reference). Do you think they would fit?
ABFB6E54-9F31-4F50-8AD4-0FC5513C8CB6.jpeg
846F6DCE-3659-4CFF-A177-9AFCB2E50DFF.jpeg
4B0E7186-A420-4C09-B023-1FD729AC3B7D.jpeg
6D27E332-A1E5-4C94-B835-62D78B003A55.jpeg


We are getting lots of questions about tire and lift size as well as offsets for the new Bronco.

Here is our 4” Sasquatch lift kit (taking the factory 1.1” of SAS lift to almost 4” of total lift) with 37x12.5x17” BFG’s on our 17x9” Phantom wheels. PLENTY of clearance even with a -12 offset!!!

Also notice the full size matching 37” spare which just fits under the 3rd brake light…but super tight!

Parts Q&A:

- Lift kit availability: We should have our Sasquatch and non-Sasquatch lift kits available for purchase in 10-12 days. Both create right at 4” of total lift and include upper control arms. We will have limited supplies for the first run, so get on the preorder notification list by emailing: [email protected]

- Vintage Stripe: We finally have that available to purchase on our website at MaxliderBros.com inside the “Shop our Store” tab!

- YES, we have lots more parts launching the next 60-90 days! Light racks, side steps, front and rear bumpers, fender flares, performance upgrades, etc! Thanks for your support and encouragement on these!
So, I was gonna go with 20x10 -24 on 35" Nitto's.....now, after seeing this (mine is same color), I wanna go to 37"...lol. My question for you, since you say there is PLENTY of clearance.....do you think a -24 offset would fit? with the 4" lift, and crash bars removed?
Sponsored

 
OP
OP
Maxlider Brothers Customs

Maxlider Brothers Customs

Badlands
Well-Known Member
Squatch Sponsor (Level 3)
First Name
Erik
Joined
Jan 21, 2021
Threads
8
Messages
76
Reaction score
567
Location
Bloomington IL
Vehicle(s)
1979 Bronco
Your Bronco Model
Badlands
I'm curious on what your thoughts are for even larger rims and offset? I was thinking about 20x10 -24 on 35" Nitto's on mine......this kind of makes me want to go larger (I have the same color Bronco, so good reference). Do you think they would fit?

So, I was gonna go with 20x10 -24 on 35" Nitto's.....now, after seeing this (mine is same color), I wanna go to 37"...lol. My question for you, since you say there is PLENTY of clearance.....do you think a -24 offset would fit? with the 4" lift, and crash bars removed?
We have only tested 9” wide wheels with a -12 offset. The 10” wide is a mystery at this point so I can’t give you any specific data for that setup. Would 20x9” with -12 offset be an option for you?
 

Gatehouse

Outer Banks
New Member
First Name
Gate
Joined
Oct 13, 2021
Threads
0
Messages
3
Reaction score
3
Location
Huntsville
Vehicle(s)
Ford Bronco
Your Bronco Model
Outer Banks
We have only tested 9” wide wheels with a -12 offset. The 10” wide is a mystery at this point so I can’t give you any specific data for that setup. Would 20x9” with -12 offset be an option for you?
I saw a Bronco over at Custom offset that had the setup I referred to on a 2.5" lift and they say no issues....I just don't know about it being 37"....I l really like the aggressive look of the -24 which is what I hoped to get. Have to admit, your -12 looks good though
 

MWILD

Big Bend
Well-Known Member
Joined
Oct 17, 2021
Threads
29
Messages
632
Reaction score
1,359
Location
North Carolina
Vehicle(s)
2022 - BB Sasquatch - Mid - 2.7L
Your Bronco Model
Big Bend
Clubs
 
I’m thinking about installing 37x12.5 on the stock Sasquatch rims. Do you all know if I purchase the stage 1 lift kit would there be rubbing at full lock?
 

_TJG_

First Edition
Well-Known Member
First Name
Todd
Joined
Dec 26, 2021
Threads
9
Messages
65
Reaction score
162
Location
Louisiana
Vehicle(s)
2021 Bronco First Edition (4 DR)
Your Bronco Model
First Edition
This is a 2.9” lift correct? Sasquatch package isn’t a lift package. If this is marketed as a 4” lift for a Sasquatch it should be 4” above Sasquatch ride height IMO. Very misleading.
Sponsored

 
 


Top