4WP Leveling Kit for 2021 Bronco is here!

[Granger Ford]

Hello everyone! I figured I would do an exciting post to introduce myself on the forum! My name is Jay and I am Grangers Accessory manager. I handle anything from bedliners to lift kits to supercharger kits here! I definitely take pride in my job here at Granger and am extremely thankful that @Zach@Granger has put me in a position that truly fits my interests.

Enough about me though! I am sure you guys saw the title of this thread. Here are some photos of the 4WP Level kit that just arrived today! This is just a spacer level, so no shocks or new springs on this kit. They estimate 2 to 2.5" in the front depending on if you use the additional spacer, part # 65-12282, and then 1.5" in the rear.

PLEASE KEEP IN MIND!!! This will NOT work on a Sasquatch pakcage. The shock length will not work from what I am reading in the instructions.

Otherwise, the quality of the parts is very nice! I am excited for our Bronco to arrive so we can get the ball rolling on this!

Please let me know if you guys have any questions on this kit or would like additional photos.

Sponsored

 

[peta8368]

are the black pieces modified crashbars? very cool!

 

[BroncoJay]

Are these kits on back order Jay?

 

[Granger Ford]

are the black pieces modified crashbars? very cool!

That is correct! To help clear for bigger tires!

 

[Granger Ford]

Are these kits on back order Jay?

When I ordered ours, it took my order and then sent me an email saying it was out of stock. Then it magically showed up today. So I am not sure if their email is a little wacky but I did get the kit pretty quickly. I will reach out to them and ask what the status is on the kits.

 

[Bikeric]

Hello everyone! I figured I would do an exciting post to introduce myself on the forum! My name is Jay and I am Grangers Accessory manager. I handle anything from bedliners to lift kits to supercharger kits here! I definitely take pride in my job here at Granger and am extremely thankful that @Zach@Granger has put me in a position that truly fits my interests.
Enough about me though! I am sure you guys saw the title of this thread. Here are some photos of the 4WP Level kit that just arrived today! This is just a spacer level, so no shocks or new springs on this kit. They estimate 2 to 2.5" in the front depending on if you use the additional spacer, part # 65-12282, and then 1.5" in the rear.

PLEASE KEEP IN MIND!!! This will NOT work on a Sasquatch pakcage. The shock length will not work from what I am reading in the instructions.

Otherwise, the quality of the parts is very nice! I am excited for our Bronco to arrive so we can get the ball rolling on this!
Please let me know if you guys have any questions on this kit or would like additional photos.

Price?

 

[Granger Ford]

Price?

This kit was $399 from 4WP. Install times I will have to figure out for you once we are able to get it installed.

 

[ZackDanger]

Not just Sasquatch, but my understanding from what Ryan at 4WP has shared, these kits will not work with either the Sasquatch *or* Badlands... basically the "Position Sensitive Bilsteins" which he has referred to as the "yellow" shocks for simplicity.

 

[88to21bronco]

I have one of these sitting in my foyer waiting on me. Now I just need my friend to clear his schedule so he can help me. Friends can be so selfish sometimes.

 

[BroncoTPA]

I am in the process of installing this kit. I ran into an issue, the directions call to remove the lower control arm, I went the route that Zone did for their level install and attempted to remove the lower strut bolts. One came out like butter, the other is seized and will not come out. Now my Bronco is stuck in the garage. Granted I was attempting the install with simple hand tools and eventually an air hammer. I am hoping to use a press to remove the seized bolt this evening. The past 24 hours have been a nightmare as replacement bolts are not in the Ford parts catalog since they are "part of" the strut and replacement struts do not seem to be available yet. It seems there is not a lot of room for error just yet.

Overall the quality of the 4wp leveling kit seems outstanding. I am eager to get ours installed.

 

[Machine Gun Fury]

@Granger Ford can we order 4WP parts directly through you?

 

[evilletruck]

Nice mine just arrived today too. They are a bit pricey compared to others but they were actually available , and it includes the modified crash bars which I like, instead of just removing them completely.

 

[ssolypop]

I have one of these sitting in my foyer waiting on me. Now I just need my friend to clear his schedule so he can help me. Friends can be so selfish sometimes.

Try pizza and beer, that might move you closer to the front of his list. And steak or ribs should get you to the the #1 spot...

 

[Granger Ford]

Not just Sasquatch, but my understanding from what Ryan at 4WP has shared, these kits will not work with either the Sasquatch *or* Badlands... basically the "Position Sensitive Bilsteins" which he has referred to as the "yellow" shocks for simplicity.

Thank you for that update! Yes, anything with Bilsteins is what I read as well. Good to know that the badlands also has those!

 

[ssolypop]

Hello everyone! I figured I would do an exciting post to introduce myself on the forum! My name is Jay and I am Grangers Accessory manager. I handle anything from bedliners to lift kits to supercharger kits here! I definitely take pride in my job here at Granger and am extremely thankful that @Zach@Granger has put me in a position that truly fits my interests.

Enough about me though! I am sure you guys saw the title of this thread. Here are some photos of the 4WP Level kit that just arrived today! This is just a spacer level, so no shocks or new springs on this kit. They estimate 2 to 2.5" in the front depending on if you use the additional spacer, part # 65-12282, and then 1.5" in the rear.

PLEASE KEEP IN MIND!!! This will NOT work on a Sasquatch pakcage. The shock length will not work from what I am reading in the instructions.

Otherwise, the quality of the parts is very nice! I am excited for our Bronco to arrive so we can get the ball rolling on this!

Please let me know if you guys have any questions on this kit or would like additional photos.

so assuming you installed all leveling parts received on a stock BD, what would be the end result? 2.5" ride height increase in both front and back?

Sponsored