Adding AUX switches - there is no Aux switch plug to be found

[1Five1 Garage]

Yesterday we took apart the overhead panels on our Big Bend and videoed how to and what to look/look out for. also to see/show what is under it... short answer is no, there is no Aux switch plug to be found.

Sponsored

 

[RustysBronco]

Yesterday we took apart the overhead panels on our Big Bend and videoed how to and what to look/look out for. also to see/show what is under it... short answer is no, there is no Aux switch plug to be found.

Great video! Under the hood, the bare wires apparently run to the body control module. In theory, the wire harness can be replaced with the harness that supports the aux switches, along with the trim pieces and switches themselves. I'm guessing you'll then need to add the fuses & enable the switches in the vehicle's BCM settings. Mangold Ford is discussing with their Ford factory rep those details I'm not 100% certain about and I hope to share an answer on those soon.

 

[RustysBronco]

Harness is behind driver and passenger A Pillars. It needs to be swapped for the OEM harness with the switch plug. Details here:

https://www.bronco6g.com/forum/thre...talled-diy-writeup-instructions-photos.35388/

Sponsored