Georgia Advice Needed. Soft Top Parts

[NewToBronco]

Broke the fiberglass front on my soft top and tore the canvas in doing so. Found a new one via Bronco6g but was wondering if anything on the soft top is worth parting out. I'm going to keep the second set of windows, but not sure if anything else is worth it before hauling it to the landfill. Thanks.

Sponsored

 

[KyTruckPlant]

On the front of each side, the part that you feed your side windows into the track, I broke the drivers side taking the top off one day and had to settle with a 3D printed replacement. If I were to be tossing a soft top, I'd keep those 2 parts and maybe the gas struts.

 

[Papa Smurf]

On the front of each side, the part that you feed your side windows into the track, I broke the drivers side taking the top off one day and had to settle with a 3D printed replacement. If I were to be tossing a soft top, I'd keep those 2 parts and maybe the gas struts.

I’ve broken both sides on mine while storing the soft top. I have the new parts, I just haven’t had the time to drill out the old rivets.

 

[KyTruckPlant]

I’ve broken both sides on mine while storing the soft top. I have the new parts, I just haven’t had the time to drill out the old rivets.

How much are the replacements, if you don't mind my asking?

 

[Papa Smurf]

How much are the replacements, if you don't mind my asking?

The guide retails for about $53. Rivets are a dollar a pack.

Sponsored