Aftermarket F/R Bumper List, Factory add-ons and Compatibilities with Sensors

[Green Nv]

this is awesome, THANK YOU..
keep your eyes open as lots hitting the market, I know that DV8 and LOD are both coming out with rear bumpers with tire racks. hopefully more than one of them is integrated to the rear gate for simplicity.
another good category would be fender liners and skid plates

How about a Full Bull bar front bumper that isn't winch compatible. Not everyone finds it necessary to have a winch. When you live in an area where deer are as plentiful as flies this application can help.

Sponsored

 

[ChompSticks]

ICON released their trail series non winch bumper with optional ACC relocation. Starting $1159.95

 

[ChompSticks]

Hefty Fab rear bumper $2200
https://heftyfab.com/collections/bronco/products/2021-ford-bronco-rear-bumper

 

[ChompSticks]

@Mountains2Metal has a camera relocation kit that mounts to the fairlead of a winch system

https://mountains2metal.com/BR6FCRL/

 

[ChompSticks]

Aluminess Aluminum bumpers
Front Winch starting at $2000 ~50lbs

https://www.aluminess.com/2021-ford-bronco-front-bumper/

Rear $1500 ~30lbs

https://www.aluminess.com/21-ford-bronco-rear-bumper/nggallery/image/ford-bronco-rear-bumper-1


They also got a Tailgate reinforcement
$795 15lbs

https://www.aluminess.com/21-ford-b...ate/nggallery/image/ford-bronco-rear-bumper-2

 

[zedster]

Aluminess Aluminum bumpers
Front Winch starting at $2000 ~50lbs

https://www.aluminess.com/2021-ford-bronco-front-bumper/

Rear $1500 ~30lbs

https://www.aluminess.com/21-ford-bronco-rear-bumper/nggallery/image/ford-bronco-rear-bumper-1


They also got a Tailgate reinforcement
$795 15lbs

https://www.aluminess.com/21-ford-b...ate/nggallery/image/ford-bronco-rear-bumper-2

The Tailgate reinforcement looks interesting as it looks like it does not keep the factory part where the tire mounts to.

 

[ChompSticks]

The Tailgate reinforcement looks interesting as it looks like it does not keep the factory part where the tire mounts to.

Yup, but quite pricey, I do like it’s only 15lbs though

 

[Bikeric]

I just got done installing the Havoc Bender Winch Ready Front Bumper ($976.70) and the Havoc Bender Rear Bumper ($488.25).
Both front and rear are sensor ready and include all hardware to mount and hold the sensors without using the factory plastic clips. The front bumper comes with the ACC relocation bracket. Front bumper comes with new mounting plates to replace the factory 3 threaded hole pieces. Rear is compatible with most receiver hitches and is sized for a maximum 38" spare tire when using the factory tire carrier location. The rear bumper does NOT come with any provisions to mount a license plate or light.

 

[Broncotrax]

No problem! I should add a disclaimer. May not be 100% accurate as manufacturers will adjust and refine their products.

LOD has a really awesome rear bumper as well. I didn't see it listed.

 

[ChompSticks]

I just got done installing the Havoc Bender Winch Ready Front Bumper ($976.70) and the Havoc Bender Rear Bumper ($488.25).
Both front and rear are sensor ready and include all hardware to mount and hold the sensors without using the factory plastic clips. The front bumper comes with the ACC relocation bracket. Front bumper comes with new mounting plates to replace the factory 3 threaded hole pieces. Rear is compatible with most receiver hitches and is sized for a maximum 38" spare tire when using the factory tire carrier location. The rear bumper does NOT come with any provisions to mount a license plate or light.

Nice ! Love it!
LOD is on there unless they have another version

 

[jalawson]

Aluminess Aluminum bumpers
Front Winch starting at $2000 ~50lbs

https://www.aluminess.com/2021-ford-bronco-front-bumper/

Rear $1500 ~30lbs

https://www.aluminess.com/21-ford-bronco-rear-bumper/nggallery/image/ford-bronco-rear-bumper-1


They also got a Tailgate reinforcement
$795 15lbs

https://www.aluminess.com/21-ford-b...ate/nggallery/image/ford-bronco-rear-bumper-2

I wonder, if the winch control pack was relocated from the top of the winch, could that front bumper be tucked in even tighter to the front end?

If so I might have just found my bumpers.

 

[breezyxm]

does anyone have the OEM parts number for the front steel modular bumper that works with sensors?

reference: 22" OBX LUX - currently plastic front bumper

 

[ChompSticks]

does anyone have the OEM parts number for the front steel modular bumper that works with sensors?

reference: 22" OBX LUX - currently plastic front bumper

Are you trying to order from the dealer? It’s actually several pieces you’ll have to order as it just doesn’t come ready. I’d look at finding someone’s takeoff instead

 

[breezyxm]

Are you trying to order from the dealer? It’s actually several pieces you’ll have to order as it just doesn’t come ready. I’d look at finding someone’s takeoff instead

thats great to know because i had no idea that also super sucks!

 

[NJRoadkill]

Came across this one on instagram

SRQ Fabrication

Sponsored