- Joined
- Jul 23, 2020
- Threads
- 11
- Messages
- 2,145
- Reaction score
- 3,233
- Location
- Denver, CO
- Vehicle(s)
- '23 4dr Badsquatch, ‘05 LJ & ‘17 F150
- Your Bronco Model
- Badlands
- Thread starter
- #1
As the title states, has anyone converted an Upfitter switch from acc+ to 12v constant yet? I know some of the Raptor & SD guys have done this mod but I believe their switch setup and dedicated wiring may be a bit different from the Bronco. Not interested in adding a separate aftermarket switch when I can keep it a clean factory look if possible.
UPDATE 1/20/22
I can confirm that yes it is possible. You have 3 options:
1. Make switches #1-4 constant hot
2. Make switches #5-6 constant hot
3. Make all switches hot
I went with option 2 as I needed switch #6 to be hot at all times. It controls the Blackvue DR900X-2CH IR Plus and allows me to turn off the cameras rather than having them run in parking mode when parked in the garage. I have the wife trained to flip the switch on when she pulls out of the garage and flip the switch off when she pulls into the garage.
UPDATE 1/20/22
I can confirm that yes it is possible. You have 3 options:
1. Make switches #1-4 constant hot
2. Make switches #5-6 constant hot
3. Make all switches hot
I went with option 2 as I needed switch #6 to be hot at all times. It controls the Blackvue DR900X-2CH IR Plus and allows me to turn off the cameras rather than having them run in parking mode when parked in the garage. I have the wife trained to flip the switch on when she pulls out of the garage and flip the switch off when she pulls into the garage.
Sponsored
Last edited: