Anyone have pictures of a non-SAS Badlands with a 2" RC lift?

[threeonone]

Looking for pics of the lift difference. Preferrably on 35's

Sponsored

 

[fuesting]

Bump, looking for this as well.

 

[Tdecell]

I too would like to see a 2" lift with 35's. But looking at the RC website (and other sites that have 2" lifts) it states "does NOT fit Badlands, Wildtrack or First Edition". I really don't want to go to a 3 1/2" lift if I don't have to..

 

[Kameronatm]

Zone has a 2in kit for badlands. I have seen zero reports from it. I'm considering it but a little hesitant. It seems like the spacer and perch collar combination may be better than either independent but still I would suspect you would lose all qualities and improvements of the HOSS suspension. You can add their upper control arms...

Am I wrong?

 

[Antimatter outer banks]

I too would like to see a 2" lift with 35's. But looking at the RC website (and other sites that have 2" lifts) it states "does NOT fit Badlands, Wildtrack or First Edition". I really don't want to go to a 3 1/2" lift if I don't have to..

you won’t be disappointed with the 3.5 lift I love mine

 

[Traugerbronco]

I too would like to see a 2" lift with 35's. But looking at the RC website (and other sites that have 2" lifts) it states "does NOT fit Badlands, Wildtrack or First Edition". I really don't want to go to a 3 1/2" lift if I don't have to..

See attached 2 inch spacer lift with new UCA's. Made by Rancho, coming out soon I believe.

 

[SnowBronco]

2" lift on 35x12.5x17 Toyo's.

 

[Lurker B6G]

The RC 2 inch lift is made up of four 1.6" spacers. This produces a 1.6 x 1.5 = 2.4" lift in the front, and a 1.6" lift in the rear. This is quite a bit of spacer lift (for the front) for a Badlands (which is already lifted 0.6 inches). This is 3.0" of additional max droop from stock, and that is why it is not recommended for the Badlands.

The Zone 2" lift (ZONF1221) is made up of a 1 inch front spacer, a 3/8 inch front perch collar, and a 1.3 inch rear spacer. This produces 2.1 inches of lift in the front and 1.3 inches in the rear. This strikes me as a much safer way to get 2 inches of lift, only adding 2.1 inches of additional max droop from stock.

Perch collars are not a good match with the Bilstein ESCV technology. But this is only a 0.6" (net lift) vs. the 2.5" from other perch collars.

Just my $0.02

 

[JayFlyer]

I too would like to see a 2" lift with 35's. But looking at the RC website (and other sites that have 2" lifts) it states "does NOT fit Badlands, Wildtrack or First Edition". I really don't want to go to a 3 1/2" lift if I don't have to..

You can’t put a 2” ready lift on a Badlands because it comes with the Bilstine (sp?) shocks

 

[Tdecell]

You can’t put a 2” ready lift on a Badlands because it comes with the Bilstine (sp?) shocks

https://zoneoffroad.com/products/2-...n-spacer-lift-badlands?variant=40095227314264

https://skyjacker.com/shop/ford/bro...m-spacers-rear-metal-spacers-for-ford-bronco/

 

[JayFlyer]

https://zoneoffroad.com/products/2-...n-spacer-lift-badlands?variant=40095227314264

https://skyjacker.com/shop/ford/bro...m-spacers-rear-metal-spacers-for-ford-bronco/

I stand corrected

 

[Tdecell]

I stand corrected

Earlier in the Bronco aftermarket, you were correct. Everyone was coming out with lifts but none would fit the Badlands /Sasquatch, but then as more company’s were getting involved, they started making them for the Bilstein equipped Broncos.

Sponsored