Anyone installed aftermarket bumper on a Bronco Raptor yet?

[None]

Anyone placed a new bumper on a Raptor yet other than those at SEMA? ADD Rock Fighter looks like a good option and one of the builds at SEMA had this plus the factory bash plate. Not sure if they modified it to fit or not.

https://broncobrigade.com/addictive-desert-designs-rock-fighter-winch-front-bumper-ford-bronco-2021/

Sponsored

 

[CarbonBronco]

That is my buddies braptor. Not all bumpers work on the braptor, but the add one is one that works. I’ll ask him if any mods were done to fit it and the factory skid.

 

[None]

That looks great. Also wondering if he got that rear ADD bumper on there without mods.

 

[Deleted member 32220]

I see why he bought a raptor…bth you could fit a 2x6 in the gap left between the bumper and skid plate. Pretty sure a mod is needed to make that look normal.

 

[FLSTFI Dave]

I really like that bumper. Looks like the camera is blocked significantly and not sure the ADD sensor will work either. If it could be set up were everything works I would be interested in it.

 

[None]

Per their website:
This Bronco front bumper retains OEM parking sensor locations, and there is an adaptive cruise control relocation bracket available.

Camera:
Agreed on it likely blocking the view significantly. Would be interested in having this guy post some pics of the camera view. Don’t see why a camera relocation kits wouldn’t work as it does on other bumpers.

Gap:
When comparing to the stock bash plate there is a gap between the bumper and plate but only along the lateral aspects. Appears flush in the center. I was hoping to keep the stock bash as every post mod application of a bash appears small. ADD does have a plate that cover pretty well.

Stock:

ADD Bash:

Drawbacks here are how modular it is compared with the stock and obviously don't know if it will work on a Raptor. ADD is high grade 3/16” aluminum alloy; uncertain about stock.

 

[Bukin67]

That is exactly what I'm looking for use and design. Relocation of camera and sensors is still in question though.

 

[Jermd21]

That is my buddies braptor. Not all bumpers work on the braptor, but the add one is one that works. I’ll ask him if any mods were done to fit it and the factory skid.

I found this old thread and was wondering if your buddy had to modify his skid plate. On the ADD website is says the factory skid plate is not compatible but this one still has it. I can reach out to ADD but figured I would ask here first. Thanks.

 

[CarbonBronco]

I found this old thread and was wondering if your buddy had to modify his skid plate. On the ADD website is says the factory skid plate is not compatible but this one still has it. I can reach out to ADD but figured I would ask here first. Thanks.

Yes the factory skid plate was modified to get it to work.

 

[ironmike]

Nobody has mentioned approach angle in this thread. Looking at the geometry of the bumper and winch mount, it appears there is some degradation in that regard.

 

[Spiderwolf]

Here are some pics of my 2023 Bronco Raptor with front and rear Bodyguard bumpers.

 

[raptorusmaximus]

I like the rear bumper, but can't anyone incorporate a license bracket???

Sponsored