AR | STIRRUP® OEM Rail Fitment, Billet Aluminum Side Step - Brongo6G Exclusive Part

[BroncoBoy22]

Yes. The STIRRUPS will mount to any of the brackets.

Holy cow you guys are KILLING IT!!

dangit now I got to decide!!

Any word on how much weight the Stirrup with the grip mount will hold? In case I have heavier passengers want to make sure I don’t need the drilled version.


Also Curtis when do you think we’d have to notify you by if we want to change our order?


Thanks again man this is freaking awesome

Sponsored

 

[EIGHTLUG]

Holy cow you guys are KILLING IT!!

dangit now I got to decide!!

Any word on how much weight the Stirrup with the grip mount will hold? In case I have heavier passengers want to make sure I don’t need the drilled version.


Also Curtis when do you think we’d have to notify you by if we want to change our order?


Thanks again man this is freaking awesome

The STIRRUP GRIP bracket has been reinforced for downward force. In that sense, it’s closer to equal to the bolt on brackets. Essentially, it will support the weight of anything that can stand on it.

It has a lot less strength in an upward force. Say, if you slide over a log or a large rock. You’re really reliant on the clamping force of 3 M8 bolts that are driving themselves into the rock rail. Obviously, the tighter you make those bolts, the more secure the hold. There comes a point where you will begin to deform the bracket or indent the rail. For that, there will be a torque spec for the bolts in the installation instructions.

To make any changes to any order, email [email protected] with your order or invoice number and the change you’d like to make.

 

[ricstang]

SEND IT! 4 door Black Diamond!

 

[BroncoBoy22]

The STIRRUP GRIP bracket has been reinforced for downward force. In that sense, it’s closer to equal to the bolt on brackets. Essentially, it will support the weight of anything that can stand on it.

It has a lot less strength in an upward force. Say, if you slide over a log or a large rock. You’re really reliant on the clamping force of 3 M8 bolts that are driving themselves into the rock rail. Obviously, the tighter you make those bolts, the more secure the hold. There comes a point where you will begin to deform the bracket or indent the rail. For that, there will be a torque spec for the bolts in the installation instructions.

To make any changes to any order, email [email protected] with your order or invoice number and the change you’d like to make.

Perfecto!!

ill email to change my order to the clamps and try that out first then if I need the drop or the bulletproof drilling I will order those brackets later!

this ROCKS!!!

 

[Gilby1969]

Hey Curtis,
As I have never seen the rock rails in person yet, how does your Graphite Black coating match up to the OEM finish?

 

[Bronco21fan]

I ordered before there was all these options I want the bolt on style so will I just leave my order as is a d any updates on shipping

 

[Clobbit]

SEND IT. Grips for 2D.

 

[STX Bronco]

@EIGHTLUG this STIRRUP GRIP is exactly what I was mentioning before. Looks awesome and the STIRRUP modeled on the Cactus Gray makes it even better. I am in line for a 22 2D BL or possibly beyond, but I plan on looking you guys up when it’s my time. Bravo

 

[EIGHTLUG]

Hey Curtis,
As I have never seen the rock rails in person yet, how does your Graphite Black coating match up to the OEM finish?

They will be powder coated as dead nuts as possible. I'm going for a seamless OEM look.

If Ford sources their black pigment from some factory in the middle of the remote jungles of South America, I'll hire a guide and find that powder factory, like Denzel Washington in American Gangster.

 

[redone17]

@EIGHTLUG - I know you changed ETA on delivering these. When is the deadline to be able to decide on bracket? I’d like to see photos of them mounted on the vehicle before making a final decision. Keep it up!!

 

[EIGHTLUG]

@EIGHTLUG - I know you changed ETA on delivering these. When is the deadline to be able to decide on bracket? I’d like to see photos of them mounted on the vehicle before making a final decision. Keep it up!!

Barring any shipping issues from SoCal to me, I plan to have a set on our R&D Bronco the week of Thanksgiving for pictures. One side will be the machined top surface and one side will be solid black. Then, due to the modularity of the design, once the drop brackets are machined, I can get those fitted up for pictures too.

*Due to the 'on the fly' nature of this project and there now being so many options that weren't available at kickoff, I'll swap parts for those that are in on the pre-order, no questions asked. We can work out the fine details later.

 

[JOMONJOE]

<RESERVED> AR| STIRRUP

BRONCO6G Member Pre-Sale

1. De Brus
2.mikey_photo
3.DubC
4.icd70
5.Daktari
6.Nobody
7.iamchewby
8.CptSamFalcon
9.Bronco21fan
10.JediMcMuffin
11.bytheway
12.gmac
13.ironiguana
14.aniljavali
15.604Bronco
16.Dubsilk
17.FindmeintheTailout
18.mljohnson1973
19.PNWBronco
20.tjdahl1911
21.PlayUltimate
22.Heeba
23.mortgagebruce
24.BroncoBoy22
25.michaeldc46
26.TheeBullhead
27.jlj4660
28.BroncoBuckaroo
29.Belem
30.GToddC5
31.T-Bronc
32.migsby_carmichael
33.BroncoOvrlndr
34.wanna1
35.corey07
36.JetG
37.Gumbeaux
38.KrazeeEyezKilla
39.redcatcher27
40.etmccaus86
41.Texasex
42.Liberty
43.PrevCYBRTRKrez
44.TommyBronco
45.Thehagermaniac
46.jkburg
47.bgcfman
48.gizmohd
49.Sherminator
50.661calibronco
51.SquatchHunter
52.Bdub2you
53.BdubBronco
54.littlepope
55.scotts418
56.orangemethodology
57.redone17
58.CG2Door
59.MtnRanger
60.Snow93
61.Jarret
62.antman92
63.bigkansas
64.DewyBanzai
65.DoubleADuster
66.Triceratops
67.djbearc
68.buckjr
69.HardenUp
70.Soup8508
71.onegdgal
72.BLBronco133
73.Aman
74.Lagrange 6G
75.FMC
76.nd2002
77.Bomar
78.pawhitejr
79.Gone Wild
80.ProudestMonkey
81.Road Warrior
82.jasetischer
83.BGBronco
84.one800higgins
85.amcap
86.erniecombs
87.Bronco4
88.kevinlockard
89.LSTLAF
90.BroncoSTL
91.BKrugby
92.hozer
93.Broncadonk MKG
94.jmalinov
95.BigJim90
96.305cashparadise
97.cd13
98.jdamach1
99.BroncoTodd
100.Dez Pony
101. SWADSP
102.Lilj4425
103.LowerDixie77
104.BroncoPVC
105.Chopper67
106.Tippster
107.Who is
108.Big Diamond
109.GreenMtnBronco
110.GoulaRun79
111.tjparisi
112.Perfect-Beast-2
113.bran134
114.dtrump
115.Fly2Win
116.Mr.Bojangles
117.EruptBronco
118.Tarheel_Wes
119.karguy08
120.Mmarto
121.Bensquatch
122.AmandaFE
123.rafterman
124.smheard
125.kmcran
126.shinersmike
127.JDUBS
128.Jolo86
129.Heymucko
130.Cousin626
131.Smackett330
132.22BlackDiamondGreen
133.FstFrd00
134.Jer
135.Arjineal
136.Dragline
137.TracytheMighty
138.VehiChase
139.Sikinboat
140.shotsy
141.4door4family

142.hammer_head
143.scc361
144.Kel
145.BroncoRed1967
146.roush062003
147.ChathamShark
148.Johare11
149.ARETE
150.Bunker704
151.SaveTheManuals
152.JMerTaw
153. JOMONJOE

 

[Gilby1969]

They will be powder coated as dead nuts as possible. I'm going for a seamless OEM look.

If Ford sources their black pigment from some factory in the middle of the remote jungles of South America, I'll hire a guide and find that powder factory, like Denzel Washington in American Gangster.

Excellent those are the little design elements that I am looking for. Looking forward to seeing the real deal.
On the topic of design details any thoughts on a version where the hole pattern is similar to the badlands grill?

 

[BroncoBoy22]

Excellent those are the little design elements that I am looking for. Looking forward to seeing the real deal.
On the topic of design details any thoughts on a version where the hole pattern is similar to the badlands grill?

That would be sweet!

 

[jeff sr]

SEND IT

Sponsored