ARB Twin Air Compressor and Pressure Control Kit Install

[Cat]

I finally got around to installing the KR Air Coupler Switch Bracket and ARB Pressure Control Kit. I went overboard ordering hoses and couplers from @4x4TruckLEDs.com, but in the end only needed what is listed below to achieve a clean install.

Parts List:
ARB On-Board Twin Air Compressor
ARB Pressure Control Kit
KR Off-Road ARB Compressor Engine Bay Mount
KR Off-Road ARB Compressor & Air Coupler Switch Bracket
ARB Air Hose Coupler (JIC-04 37 Degree Flare Fitting)
ARB Air Hose Coupler Dust Cap
ARB Reinforced Hose JIC-04 0.5m
ARB Reinforced Hose JIC-04 0.3m
ARB Adapter 1/8 BSP (M) JIC-04 (M), 2 Pack
ARB Adapter 1/4 NPT(M) JIC-04(M), 2 Pack - Only 1 required
ARB Air Line Adapter Fitting 45 Elbow, 2 Pack - Only 1 required

Please note, due to the configuration of the ports on the ARB regulator I was unable to have the input and output hoses on the same side, so the layout is a bit more spread out than I would have preferred. Also, the spot where I mounted the regulator needed to be twisted a bit so the pressure sensor would clear the coupler. Finally, the screw I used for the regulator mount was a bit too long, so I used four washers to take up the extra space.

Initially I planned on using the supplied ARB switch, but I decided to forgo that idea because using the upfitter switches made for a cleaner install.

Hi Aman!

Why did you install a Pressure Control Kit?

I just got around to installing my ARB Twins, and wired it to an aux switch.

Sponsored

 

[MrGreen55]

Hi Aman!

Why did you install a Pressure Control Kit?

I just got around to installing my ARB Twins, and wired it to an aux switch.

You can set the PsI that you wont to for airing up / airing down with your phone.

 

[4x4TruckLEDs.com]

I connected both the air compressor's trigger wire and the pressure kit's power lead to switch 6. More than enough amperage to handle both.

Now I want to install one of these

*looks at the ARB stuff on shelf*

I mean... I've GOT the supplies necessary

 

[Cat]

You can set the PsI that you wont to for airing up / airing down with your phone.

Ohhhh....hmmm.

Thnx!

 

[BroncoKong Jr.]

I've been curious about the pressure control for a while now. Cool to see it installed! Let us know how you like it.

 

[GotWake]

Oh well, something else to order. My wife……..

 

[ICUGAZN]

Now I want to install one of these

*looks at the ARB stuff on shelf*

I mean... I've GOT the supplies necessary

If you do, please do a video.

 

[Potluck99]

You plan on refunding me my money for the return I sent back 3 weeks ago?

Good luck. That guy is a joke.

 

[Bronco Bob]

You can set the PsI that you wont to for airing up / airing down with your phone.

So You can set it with Your phone and just walk away and it will cut off at the desired setpoint?

 

[4x4TruckLEDs.com]

Can you put together a list of the parts you actually used? Or was that the actual list of what you DID use on the first page? I know you ordered a LOT of parts from us, not sure what you used or if that was just a list of everything purchased.

I've had some folks email me asking what the parts list is.

 

[BroncoKong Jr.]

Good luck. That guy is a joke.

I got a refund as soon as they received my returned item ¯\_(ツ)_/¯

 

[Potluck99]

I got a refund as soon as they received my returned item ¯\_(ツ)_/¯

Look at the history with this guy. Suprised he still posts on here. There’s whole threads about him.

 

[Panzer948]

I finally got around to installing the KR Air Coupler Switch Bracket and ARB Pressure Control Kit. I went overboard ordering hoses and couplers from @4x4TruckLEDs.com, but in the end only needed what is listed below to achieve a clean install.

Parts List:
ARB On-Board Twin Air Compressor
ARB Pressure Control Kit
KR Off-Road ARB Compressor Engine Bay Mount
KR Off-Road ARB Compressor & Air Coupler Switch Bracket
ARB Air Hose Coupler (JIC-04 37 Degree Flare Fitting)
ARB Air Hose Coupler Dust Cap
ARB Reinforced Hose JIC-04 0.5m
ARB Reinforced Hose JIC-04 0.3m
ARB Adapter 1/8 BSP (M) JIC-04 (M), 2 Pack
ARB Adapter 1/4 NPT(M) JIC-04(M), 2 Pack - Only 1 required
ARB Air Line Adapter Fitting 45 Elbow, 2 Pack - Only 1 required

Please note, due to the configuration of the ports on the ARB regulator I was unable to have the input and output hoses on the same side, so the layout is a bit more spread out than I would have preferred. Also, the spot where I mounted the regulator needed to be twisted a bit so the pressure sensor would clear the coupler. Finally, the screw I used for the regulator mount was a bit too long, so I used four washers to take up the extra space.

Initially I planned on using the supplied ARB switch, but I decided to forgo that idea because using the upfitter switches made for a cleaner install.

Excellent work! 4x4TruckLEDs has finally shipped my dual compressor and bracket (I had already received the Air Coupler Switch Bracket). I should get them by mid week and do the install over the weekend. Good timing for your post! I am still on the fence about using the supplied switch (and mount it near the coupler) or the upfitter switches. I will play around with it when I get the parts. I may post pics when done.

 

[Aman]

Excellent work! 4x4TruckLEDs has finally shipped my dual compressor and bracket (I had already received the Air Coupler Switch Bracket). I should get them by mid week and do the install over the weekend. Good timing for your post! I am still on the fence about using the supplied switch (and mount it near the coupler) or the upfitter switches. I will play around with it when I get the parts. I may post pics when done.

Thank you!

If I had not purchased the Pressure Control Kit, I would have used the supplied switch mounted on the Air Coupler Switch Bracket. However, since the PC Kit gives me Bluetooth control over the compressor, I decided to use the upfitter switches.

 

[ICUGAZN]

Can you put together a list of the parts you actually used? Or was that the actual list of what you DID use on the first page? I know you ordered a LOT of parts from us, not sure what you used or if that was just a list of everything purchased.

I've had some folks email me asking what the parts list is.

Did you do this install yet? I'm interested if there is anything I would have to do if my compressor power is wired to an Aux switch already.

Sponsored