If I wasn’t already counted, +1 for blackIf I can get a concencus on black hardware for black rails, I'll just make black the standard.
Add your thoughts below.
If silver does end up getting the nod can you include a black sharpie with mine?If I can get a concencus on black hardware for black rails, I'll just make black the standard.
Add your thoughts below.
Yes to black hardware!If I can get a concencus on black hardware for black rails, I'll just make black the standard.
Add your thoughts below.
+1 you can get any color you want as long as it's black!!If I can get a concencus on black hardware for black rails, I'll just make black the standard.
Add your thoughts below.
Can’t wait!!We FINALLY had a chance to get the rails mounted up in a Bronco for pictures and all I can say is it does not disappoint! Our local dealer shot me a text that there was a 2 door OBX demo that was just delivered and we can get our hands on it. That was at 4 PM. We were there with keys in our hands at 5 PM. Yeah, it was dark by then, but adapt and overcome.
Right off the bat, WOW, the fitment is spot on. The rails sit just above the dash and will easily allow for rail mount adapters to fit and still be low profile. Which means your devices will sit as low as possible. The rails are easily visible through the windshield for that extra flex on those that are the have nots in the Bronco world. The tumbled matte clear and Tech Bronze finishes will absolutely pop off the dash. I took a couple pics from a passenger/driver point of view. The BAM definitely has a presence. It’s not one of those things you install and overlook. That’s for sure.
The rails are off to anodizing now. Once they are wrapped up, they’ll be shipped to me for final inspection, prep for shipping, and will be headed out our doors to all of you! As soon as I have them back from anodizing, we can get much more firm dates for shipping.
All I can say is, not too shabby for a 100% virtual development part and rapid production. Being a smaller company, decisions get made much faster and work can still be literally ram rodded with zero yellow tape to cut. You literally watched it all unfold right here. Everything from saying we’ll make the rail to getting a production part installed on a vehicle. I sincerely thank all of you for the support.
Yes please!!If I can get a concencus on black hardware for black rails, I'll just make black the standard.
Add your thoughts below.
