ARCHETYPE RACING | CALL SIGN Billet Front License Plate Bracket

[EIGHTLUG]

The official AR | CALL SIGN renderings are here! If you have a BRONCO and you need to get a front plate on it (you know, for legal purposes) or if you have a BRONCO inbound and don't want your dealer to drill new holes into your new rig, this is for you!

**Call your dealer and tell them that you will bring them a bracket.**

Fitment:

The CALL SIGN is designed for the Modular Bumper. The CALL SIGN will fit the left or right modular mount on the bumper. Like our other products, the CALL SIGN is full 6061 billet aluminum with quality 316 stainless mounting hardware (all provided). This bolts right in to the existing threaded holes in you bumper. No plastic, no sheet metal, no corners cut. Yes, even the actual license plate mount is a fully machined billet component. All done right here in the USA! Dare I say, probably the nicest and most robust license plate mount to be installed on a vehicle.

The license plate bracket is designed to 50 state DOT passenger vehicle license plate standards. All mounting hardware, not only for the mounts to the bumper, but also to mount your license plate are provided. This is a very smart and well put together piece of kit. Headlight performance and parking sensors will not be affected by the CALL SIGN's placement.

Very soon, we'll begin to develop a line of parts that utilize the same base mounts the CALL SIGN uses for auxiliary lights, dune flag, antenna mount, GoPro mount, etc. You can run a license plate on one side and an accessory on the other side, fully leveraging what the OEM has provided for on board mounting. Color is a classy RAL 7043 Traffic Grey, which nicely compliments the OEM grey on the bumper.

PRICING:

Retail for the CALL SIGN is $167.50

The discounted BRONCO6G member price is $134.00

AVAILABILITY:

CALL SIGNS are being machined now. The first run will be shipping to customers the week of Nov 22 (Thanksgiving)

THE FUN PART:

If you would like to pre-order your CALL SIGN now, here's what you'll need to do.

1. Reply in this thread: SEND IT!

2. We will PM you with a one time use code for the ARCHETYPE RACING website. AR | CALL SIGN

3. Go to the link, also provided in the PM, to the CALL SIGN, and you'll be able to check out with the BRONCO6G 20% discount.

4. Continue going crazy, either waiting for your BRONCO to arrive or this sweet box of goodness to land on your doorstep!

Sponsored

 

[EIGHTLUG]

Plenty of data gathered for future parts R&D. Pocket light mounting brackets, light brackets for the modular bumper mount points, recovery points, and most definitely the CALL SIGN!

We also have the trail sights digitized for a before billet design which will be a launching point for all of those accessory mounts you want. These will be adventure/overland based. Think HiLift Jacks, fishing pole holder, anything you low profile that you would want to keep easily accessible outside of your rig. I’ll create another thread to track development on the trail sight.

 

[EIGHTLUG]

<RESERVED>

 

[RyanRallyX]

No choice on the plate for me...can't wait to be thrilled!

 

[helifino16]

AR | CALL SIGN

Accessory #1 on the list is going to be a robust, well positioned, and tastefully executed billet aluminum front license plate bracket. The first design will be for the modular front bumper w/o bull bar. We pulled 3D scan data today and will jump directly into product development for this one. The goal is to have it ready for SEMA. If any of you will have your vehicle there, PM me. I'll definitely work with you to get one in your hands for the show. Renderings will be coming soon! Versions 2 and 3 will be applicable to bull bar and winch equipped front bumpers. I've said it before on another thread. -This part will be so nice the owners without a front license plate will want to get one.

You guys are my heroes.

I've been looking for some better solution for this as well, but for the stock regular bumper. Since I'll have LUX w/ACC, I want to avoid blocking that space on the bumper. I'm sure many folks would like something easily removable - for off-road use.

Let's see what you come up with. Best of luck!

 

[zerk4321]

looking forward to it

 

[Broncola]

Interested in seeing your version!

 

[EIGHTLUG]

CALL SIGN is on deck and being designed now. It will be part of a modular bumper accessory system. The MOD BASE will be the foundation for accessories like: light mounts, flag mounts, GoPro mount, and license plate.

I’ll try to get someone out by weeks end for your viewing enjoyment. MOD BASE and CALL SIGN is planned for release at SEMA.

 

[TexasBlaze]

AR | CALL SIGN

Accessory #1 on the list is going to be a robust, well positioned, and tastefully executed billet aluminum front license plate bracket. The first design will be for the modular front bumper w/o bull bar. We pulled 3D scan data today and will jump directly into product development for this one. The goal is to have it ready for SEMA. If any of you will have your vehicle there, PM me. I'll definitely work with you to get one in your hands for the show. Renderings will be coming soon! Versions 2 and 3 will be applicable to bull bar and winch equipped front bumpers. I've said it before on another thread. -This part will be so nice the owners without a front license plate will want to get one.

Any renderings yet?

 

[EIGHTLUG]

Any renderings yet?

Should have them ready this coming week.

 

[EIGHTLUG]

First render of the AR | CALL SIGN is complete. The bracket can be mounted on the driver or passenger side, along with the license plate bracket itself. It's also provisioned with mount holes for driver or passenger side mounting. This means, in a matter of minutes, and basic hand tools, you'll have a place to mount that front plate and save yourself from those unsightly holes in your grill.

Mounting the license plate above the bumper isn't the most common of locations, but it works with the Bronco. No interference with lights, parking sensors, radar, BRONCO lettering etc. It's basically the best location allowable, considering everything we're working around and what the designers gave us to work with.

The mounting brackets will also be the foundation of bumper mounted accessories, utilizing the mounting locations on the modular bumper. Think dune flag, GoPro mount, light mounts... Run the plate on one side and an accessory on the other. We're just getting started! But first thing's first! Let's get legal and look good doing it.

 

[TexasBlaze]

First render of the AR | CALL SIGN is complete. The bracket can be mounted on the driver or passenger side, along with the license plate bracket itself. It's also provisioned with mount holes for driver or passenger side mounting. This means, in a matter of minutes, and basic hand tools, you'll have a place to mount that front plate and save yourself from those unsightly holes in your grill.

Mounting the license plate above the bumper isn't the most common of locations, but it works with the Bronco. No interference with lights, parking sensors, radar, BRONCO lettering etc. It's basically the best location allowable, considering everything we're working around and what the designers gave us to work with.

The mounting brackets will also be the foundation of bumper mounted accessories, utilizing the mounting locations on the modular bumper. Think dune flag, GoPro mount, light mounts... Run the plate on one side and an accessory on the other. We're just getting started! But first thing's first! Let's get legal and look good doing it.

So it’s using the holes of where the bull bar would go? Hypothetically if I got the bull bar would they both be able to go there? Otherwise that’s awesome I’m excited for it either way

 

[EIGHTLUG]

So it’s using the holes of where the bull bar would go? Hypothetically if I got the bull bar would they both be able to go there? Otherwise that’s awesome I’m excited for it either way

I have something totally different planned for those bull bar equipped Broncos

 

[U725Bronco]

I have something totally different planned for those bull bar equipped Broncos

looking forward to seeing what you come up with for the bull bar Broncos

 

[EIGHTLUG]

The official AR | CALL SIGN renderings are here! If you have a BRONCO and you need to get a front plate on it (you know, for legal purposes) or if you have a BRONCO inbound and don't want your dealer to drill new holes into your new rig, this is for you!

**Call your dealer and tell them that you will bring them a bracket.**

Fitment:

The CALL SIGN is designed for the Modular Bumper. The CALL SIGN will fit the left or right modular mount on the bumper. Like our other products, the CALL SIGN is full 6061 billet aluminum with quality 316 stainless mounting hardware (all provided). This bolts right in to the existing threaded holes in you bumper. No plastic, no sheet metal, no corners cut. Yes, even the actual license plate mount is a fully machined billet component. All done right here in the USA! Dare I say, probably the nicest and most robust license plate mount to be installed on a vehicle.

The license plate bracket is designed to 50 state DOT passenger vehicle license plate standards. All mounting hardware, not only for the mounts to the bumper, but also to mount your license plate are provided. This is a very smart and well put together piece of kit. Headlight performance and parking sensors will not be affected by the CALL SIGN's placement.

Very soon, we'll begin to develop a line of parts that utilize the same base mounts the CALL SIGN uses for auxiliary lights, dune flag, antenna mount, GoPro mount, etc. You can run a license plate on one side and an accessory on the other side, fully leveraging what the OEM has provided for on board mounting. Color is a classy RAL 7043 Traffic Grey, which nicely compliments the OEM grey on the bumper.

PRICING:

Retail for the CALL SIGN is $167.50

The discounted BRONCO6G member price is $134.00

AVAILABILITY:

CALL SIGNS are being machined now. The first run will be shipping to customers the week of Nov 22 (Thanksgiving)

THE FUN PART:

If you would like to pre-order your CALL SIGN now, here's what you'll need to do.

1. Reply in this thread: SEND IT!

2. We will PM you with a one time use code for the ARCHETYPE RACING website.

3. Go to the link, also provided in the PM, to the CALL SIGN, and you'll be able to check out with the BRONCO6G 20% discount.

4. Continue going crazy, either waiting for your BRONCO to arrive or this sweet box of goodness to land on your doorstep!

Sponsored