Sponsored

ARCHETYPE RACING | CALL SIGN Billet Front License Plate Bracket

OP
OP
EIGHTLUG

EIGHTLUG

First Edition
Well-Known Member
Squatch Sponsor (Level 3)
First Name
Curtis
Joined
Mar 21, 2021
Threads
44
Messages
1,887
Reaction score
9,766
Location
Silverdale, WA
Vehicle(s)
G2 Raptor, GT350, Land Rover SERIES and DEFENDER
Your Bronco Model
First Edition
What's the lead time on this one? I don't see it on the page...
Hi David,

This is in stock and typically goes out within 24-48 hours.

Tracy
Sponsored

 

Wirenut20

Wildtrak
Well-Known Member
First Name
Mike
Joined
Jul 7, 2020
Threads
2
Messages
151
Reaction score
205
Location
95112
Vehicle(s)
2020 Explorer ST, 97 F150, 92 Mustang LX 5.0
Your Bronco Model
Wildtrak
Clubs
 
The official AR | CALL SIGN renderings are here! If you have a BRONCO and you need to get a front plate on it (you know, for legal purposes) or if you have a BRONCO inbound and don't want your dealer to drill new holes into your new rig, this is for you!

**Call your dealer and tell them that you will bring them a bracket.**

Fitment:

The CALL SIGN is designed for the Modular Bumper. The CALL SIGN will fit the left or right modular mount on the bumper. Like our other products, the CALL SIGN is full 6061 billet aluminum with quality 316 stainless mounting hardware (all provided). This bolts right in to the existing threaded holes in you bumper. No plastic, no sheet metal, no corners cut. Yes, even the actual license plate mount is a fully machined billet component. All done right here in the USA! Dare I say, probably the nicest and most robust license plate mount to be installed on a vehicle.

The license plate bracket is designed to 50 state DOT passenger vehicle license plate standards. All mounting hardware, not only for the mounts to the bumper, but also to mount your license plate are provided. This is a very smart and well put together piece of kit. Headlight performance and parking sensors will not be affected by the CALL SIGN's placement.

Very soon, we'll begin to develop a line of parts that utilize the same base mounts the CALL SIGN uses for auxiliary lights, dune flag, antenna mount, GoPro mount, etc. You can run a license plate on one side and an accessory on the other side, fully leveraging what the OEM has provided for on board mounting. Color is a classy RAL 7043 Traffic Grey, which nicely compliments the OEM grey on the bumper.

PRICING:

Retail for the CALL SIGN is $167.50

The discounted BRONCO6G member price is $134.00

AVAILABILITY:


CALL SIGNS are being machined now. The first run will be shipping to customers the week of Nov 22 (Thanksgiving)

THE FUN PART:

If you would like to pre-order your CALL SIGN now, here's what you'll need to do.

1. Reply in this thread: SEND IT!

2. We will PM you with a one time use code for the ARCHETYPE RACING website. AR | CALL SIGN

3. Go to the link, also provided in the PM, to the CALL SIGN, and you'll be able to check out with the BRONCO6G 20% discount.

4. Continue going crazy, either waiting for your BRONCO to arrive or this sweet box of goodness to land on your doorstep!




Bronco - CALL SIGN - 1-1.jpg
Bronco - CALL SIGN - 1-2.jpg
Bronco - CALL SIGN - 1-3.jpg
Bronco - CALL SIGN - 1-5.jpg


A1400F22-06CE-4377-9E07-492BF79FAE09.jpeg


2E228AA5-7837-438D-874D-CC39BEB05DC1.jpeg


94C5E7C9-188E-48BA-BA8A-940E3CA7EAA5.jpeg


20AB51FF-7C3E-4751-B9BF-5269B8CB7426.jpeg


99D1E3DF-328C-4416-BC18-28B1AB2B45F5.jpeg


D995272A-C635-4B8A-B7E5-D590C91F250F.jpeg


C139E4F0-D0FC-4C42-98D4-AB6CD3EE9F9C.jpeg


6505BD0A-71A5-42D1-B11B-117A69412ED5.jpeg


D95F1EBB-4125-4FCC-8C53-AD847B95520F.jpeg
Good morning.

I would like to order one of these. Am I still eligible for the discount?
 

TrailBuddah

Badlands
Member
First Name
Robert
Joined
Aug 1, 2020
Threads
0
Messages
16
Reaction score
29
Location
Maryland
Vehicle(s)
Jeep Grand Cherokee, Two-Door Ford Bronco Badlands
Your Bronco Model
Badlands
Clubs
 
The official AR | CALL SIGN renderings are here! If you have a BRONCO and you need to get a front plate on it (you know, for legal purposes) or if you have a BRONCO inbound and don't want your dealer to drill new holes into your new rig, this is for you!

**Call your dealer and tell them that you will bring them a bracket.**

Fitment:

The CALL SIGN is designed for the Modular Bumper. The CALL SIGN will fit the left or right modular mount on the bumper. Like our other products, the CALL SIGN is full 6061 billet aluminum with quality 316 stainless mounting hardware (all provided). This bolts right in to the existing threaded holes in you bumper. No plastic, no sheet metal, no corners cut. Yes, even the actual license plate mount is a fully machined billet component. All done right here in the USA! Dare I say, probably the nicest and most robust license plate mount to be installed on a vehicle.

The license plate bracket is designed to 50 state DOT passenger vehicle license plate standards. All mounting hardware, not only for the mounts to the bumper, but also to mount your license plate are provided. This is a very smart and well put together piece of kit. Headlight performance and parking sensors will not be affected by the CALL SIGN's placement.

Very soon, we'll begin to develop a line of parts that utilize the same base mounts the CALL SIGN uses for auxiliary lights, dune flag, antenna mount, GoPro mount, etc. You can run a license plate on one side and an accessory on the other side, fully leveraging what the OEM has provided for on board mounting. Color is a classy RAL 7043 Traffic Grey, which nicely compliments the OEM grey on the bumper.

PRICING:

Retail for the CALL SIGN is $167.50

The discounted BRONCO6G member price is $134.00

AVAILABILITY:


CALL SIGNS are being machined now. The first run will be shipping to customers the week of Nov 22 (Thanksgiving)

THE FUN PART:

If you would like to pre-order your CALL SIGN now, here's what you'll need to do.

1. Reply in this thread: SEND IT!

2. We will PM you with a one time use code for the ARCHETYPE RACING website. AR | CALL SIGN

3. Go to the link, also provided in the PM, to the CALL SIGN, and you'll be able to check out with the BRONCO6G 20% discount.

4. Continue going crazy, either waiting for your BRONCO to arrive or this sweet box of goodness to land on your doorstep!




Bronco - CALL SIGN - 1-1.jpg
Bronco - CALL SIGN - 1-2.jpg
Bronco - CALL SIGN - 1-3.jpg
Bronco - CALL SIGN - 1-5.jpg


A1400F22-06CE-4377-9E07-492BF79FAE09.jpeg


2E228AA5-7837-438D-874D-CC39BEB05DC1.jpeg


94C5E7C9-188E-48BA-BA8A-940E3CA7EAA5.jpeg


20AB51FF-7C3E-4751-B9BF-5269B8CB7426.jpeg


99D1E3DF-328C-4416-BC18-28B1AB2B45F5.jpeg


D995272A-C635-4B8A-B7E5-D590C91F250F.jpeg


C139E4F0-D0FC-4C42-98D4-AB6CD3EE9F9C.jpeg


6505BD0A-71A5-42D1-B11B-117A69412ED5.jpeg


D95F1EBB-4125-4FCC-8C53-AD847B95520F.jpeg
Send it!
 

Wirenut20

Wildtrak
Well-Known Member
First Name
Mike
Joined
Jul 7, 2020
Threads
2
Messages
151
Reaction score
205
Location
95112
Vehicle(s)
2020 Explorer ST, 97 F150, 92 Mustang LX 5.0
Your Bronco Model
Wildtrak
Clubs
 
Send it
 

Sponsored

MaulCrawler

Badlands
New Member
First Name
Allen
Joined
Oct 22, 2022
Threads
0
Messages
2
Reaction score
2
Location
SEATTLE
Vehicle(s)
22 BRONCO
Your Bronco Model
Badlands
The official AR | CALL SIGN renderings are here! If you have a BRONCO and you need to get a front plate on it (you know, for legal purposes) or if you have a BRONCO inbound and don't want your dealer to drill new holes into your new rig, this is for you!

**Call your dealer and tell them that you will bring them a bracket.**

Fitment:

The CALL SIGN is designed for the Modular Bumper. The CALL SIGN will fit the left or right modular mount on the bumper. Like our other products, the CALL SIGN is full 6061 billet aluminum with quality 316 stainless mounting hardware (all provided). This bolts right in to the existing threaded holes in you bumper. No plastic, no sheet metal, no corners cut. Yes, even the actual license plate mount is a fully machined billet component. All done right here in the USA! Dare I say, probably the nicest and most robust license plate mount to be installed on a vehicle.

The license plate bracket is designed to 50 state DOT passenger vehicle license plate standards. All mounting hardware, not only for the mounts to the bumper, but also to mount your license plate are provided. This is a very smart and well put together piece of kit. Headlight performance and parking sensors will not be affected by the CALL SIGN's placement.

Very soon, we'll begin to develop a line of parts that utilize the same base mounts the CALL SIGN uses for auxiliary lights, dune flag, antenna mount, GoPro mount, etc. You can run a license plate on one side and an accessory on the other side, fully leveraging what the OEM has provided for on board mounting. Color is a classy RAL 7043 Traffic Grey, which nicely compliments the OEM grey on the bumper.

PRICING:

Retail for the CALL SIGN is $167.50

The discounted BRONCO6G member price is $134.00

AVAILABILITY:


CALL SIGNS are being machined now. The first run will be shipping to customers the week of Nov 22 (Thanksgiving)

THE FUN PART:

If you would like to pre-order your CALL SIGN now, here's what you'll need to do.

1. Reply in this thread: SEND IT!

2. We will PM you with a one time use code for the ARCHETYPE RACING website. AR | CALL SIGN

3. Go to the link, also provided in the PM, to the CALL SIGN, and you'll be able to check out with the BRONCO6G 20% discount.

4. Continue going crazy, either waiting for your BRONCO to arrive or this sweet box of goodness to land on your doorstep!




Bronco - CALL SIGN - 1-1.jpg
Bronco - CALL SIGN - 1-2.jpg
Bronco - CALL SIGN - 1-3.jpg
Bronco - CALL SIGN - 1-5.jpg


A1400F22-06CE-4377-9E07-492BF79FAE09.jpeg


2E228AA5-7837-438D-874D-CC39BEB05DC1.jpeg


94C5E7C9-188E-48BA-BA8A-940E3CA7EAA5.jpeg


20AB51FF-7C3E-4751-B9BF-5269B8CB7426.jpeg


99D1E3DF-328C-4416-BC18-28B1AB2B45F5.jpeg


D995272A-C635-4B8A-B7E5-D590C91F250F.jpeg


C139E4F0-D0FC-4C42-98D4-AB6CD3EE9F9C.jpeg


6505BD0A-71A5-42D1-B11B-117A69412ED5.jpeg


D95F1EBB-4125-4FCC-8C53-AD847B95520F.jpeg
The official AR | CALL SIGN renderings are here! If you have a BRONCO and you need to get a front plate on it (you know, for legal purposes) or if you have a BRONCO inbound and don't want your dealer to drill new holes into your new rig, this is for you!

**Call your dealer and tell them that you will bring them a bracket.**

Fitment:

The CALL SIGN is designed for the Modular Bumper. The CALL SIGN will fit the left or right modular mount on the bumper. Like our other products, the CALL SIGN is full 6061 billet aluminum with quality 316 stainless mounting hardware (all provided). This bolts right in to the existing threaded holes in you bumper. No plastic, no sheet metal, no corners cut. Yes, even the actual license plate mount is a fully machined billet component. All done right here in the USA! Dare I say, probably the nicest and most robust license plate mount to be installed on a vehicle.

The license plate bracket is designed to 50 state DOT passenger vehicle license plate standards. All mounting hardware, not only for the mounts to the bumper, but also to mount your license plate are provided. This is a very smart and well put together piece of kit. Headlight performance and parking sensors will not be affected by the CALL SIGN's placement.

Very soon, we'll begin to develop a line of parts that utilize the same base mounts the CALL SIGN uses for auxiliary lights, dune flag, antenna mount, GoPro mount, etc. You can run a license plate on one side and an accessory on the other side, fully leveraging what the OEM has provided for on board mounting. Color is a classy RAL 7043 Traffic Grey, which nicely compliments the OEM grey on the bumper.

PRICING:

Retail for the CALL SIGN is $167.50

The discounted BRONCO6G member price is $134.00

AVAILABILITY:


CALL SIGNS are being machined now. The first run will be shipping to customers the week of Nov 22 (Thanksgiving)

THE FUN PART:

If you would like to pre-order your CALL SIGN now, here's what you'll need to do.

1. Reply in this thread: SEND IT!

2. We will PM you with a one time use code for the ARCHETYPE RACING website. AR | CALL SIGN

3. Go to the link, also provided in the PM, to the CALL SIGN, and you'll be able to check out with the BRONCO6G 20% discount.

4. Continue going crazy, either waiting for your BRONCO to arrive or this sweet box of goodness to land on your doorstep!




Bronco - CALL SIGN - 1-1.jpg
Bronco - CALL SIGN - 1-2.jpg
Bronco - CALL SIGN - 1-3.jpg
Bronco - CALL SIGN - 1-5.jpg


A1400F22-06CE-4377-9E07-492BF79FAE09.jpeg


2E228AA5-7837-438D-874D-CC39BEB05DC1.jpeg


94C5E7C9-188E-48BA-BA8A-940E3CA7EAA5.jpeg


20AB51FF-7C3E-4751-B9BF-5269B8CB7426.jpeg


99D1E3DF-328C-4416-BC18-28B1AB2B45F5.jpeg


D995272A-C635-4B8A-B7E5-D590C91F250F.jpeg


C139E4F0-D0FC-4C42-98D4-AB6CD3EE9F9C.jpeg


6505BD0A-71A5-42D1-B11B-117A69412ED5.jpeg


D95F1EBB-4125-4FCC-8C53-AD847B95520F.jpeg
SEND IT!
 
OP
OP
EIGHTLUG

EIGHTLUG

First Edition
Well-Known Member
Squatch Sponsor (Level 3)
First Name
Curtis
Joined
Mar 21, 2021
Threads
44
Messages
1,887
Reaction score
9,766
Location
Silverdale, WA
Vehicle(s)
G2 Raptor, GT350, Land Rover SERIES and DEFENDER
Your Bronco Model
First Edition
Good morning.

I would like to order one of these. Am I still eligible for the discount?
Of course you are! I'll PM you the code.
 

Wirenut20

Wildtrak
Well-Known Member
First Name
Mike
Joined
Jul 7, 2020
Threads
2
Messages
151
Reaction score
205
Location
95112
Vehicle(s)
2020 Explorer ST, 97 F150, 92 Mustang LX 5.0
Your Bronco Model
Wildtrak
Clubs
 

Darcyjs14

Raptor
Well-Known Member
First Name
D’Arcy
Joined
Dec 13, 2021
Threads
1
Messages
57
Reaction score
65
Location
Seattle
Vehicle(s)
1970 Ford F250 Camper Special 4spd
Your Bronco Model
Raptor
Clubs
 
Hey Folks, I'd love a discount code for Call Sign.
 

Darcyjs14

Raptor
Well-Known Member
First Name
D’Arcy
Joined
Dec 13, 2021
Threads
1
Messages
57
Reaction score
65
Location
Seattle
Vehicle(s)
1970 Ford F250 Camper Special 4spd
Your Bronco Model
Raptor
Clubs
 
Love how mine turned out. The materials and quality are second to none. Expensive? perhaps. But I bought enough low-quality stuff for my WildTrak that I'm being more selective about what I buy now for my Braptor. I just spent $300 on a tailgate table that is, unfortunately, going back to Amazon because while it should be good, it isn't. I'm now going to find the one that's made by people who are really Overlanders, and test their products before bringing them to market, and who provide real, legible instructions and real customer service.

So was CallSign expensive? No, not at all. Not for me. It was a well made thing that will last, made by a company that answers its emails and sends out parts when I lose the originals. And for me, it's also worth paying a company that designs a thing beautifully for that beautiful design. if you made something special, you should be able to command a premium, and not expect to get your design ripped off.

Too bad Archetype doesn't make a tailgate table. It would probably cost me more than $300, but based on CallSign, I know wouldn't be returning their table(and here endeth my bitchin' and moanin' session!)

Now I just have to figure out how to mount my Swarfworks Bronco Triple light mount with CallSign, as they both use the same mounting points on the modular bumper.
Ford Bronco ARCHETYPE RACING | CALL SIGN Billet Front License Plate Bracket CallSign
 

Sponsored

TX_Badlands

Badlands
New Member
Joined
Jan 25, 2023
Threads
0
Messages
2
Reaction score
1
Location
Texas
Vehicle(s)
2017 Ford F-150
Your Bronco Model
Badlands
Clubs
 
Full send! Can’t wait to order one of these. First thing I’ll be adding when I pick mine up!

Any way I can get a discount code?
 

geneius

Badlands
New Member
Joined
May 6, 2023
Threads
0
Messages
1
Reaction score
0
Location
Los Angeles, CA
Vehicle(s)
Bronco
Your Bronco Model
Badlands
If the discount is still available, please send it. Thanks.
Sponsored

 
 


Top