ARCHETYPE RACING | CALL SIGN Billet Front License Plate Bracket

[tjdahl1911]

The official AR | CALL SIGN renderings are here! If you have a BRONCO and you need to get a front plate on it (you know, for legal purposes) or if you have a BRONCO inbound and don't want your dealer to drill new holes into your new rig, this is for you!

**Call your dealer and tell them that you will bring them a bracket.**

Fitment:

The CALL SIGN is designed for the Modular Bumper. The CALL SIGN will fit the left or right modular mount on the bumper. Like our other products, the CALL SIGN is full 6061 billet aluminum with quality 316 stainless mounting hardware (all provided). This bolts right in to the existing threaded holes in you bumper. No plastic, no sheet metal, no corners cut. Yes, even the actual license plate mount is a fully machined billet component. All done right here in the USA! Dare I say, probably the nicest and most robust license plate mount to be installed on a vehicle.

The license plate bracket is designed to 50 state DOT passenger vehicle license plate standards. All mounting hardware, not only for the mounts to the bumper, but also to mount your license plate are provided. This is a very smart and well put together piece of kit. Headlight performance and parking sensors will not be affected by the CALL SIGN's placement.

Very soon, we'll begin to develop a line of parts that utilize the same base mounts the CALL SIGN uses for auxiliary lights, dune flag, antenna mount, GoPro mount, etc. You can run a license plate on one side and an accessory on the other side, fully leveraging what the OEM has provided for on board mounting. Color is a classy RAL 7043 Traffic Grey, which nicely compliments the OEM grey on the bumper.

PRICING:

Retail for the CALL SIGN is $167.50

The discounted BRONCO6G member price is $134.00

AVAILABILITY:

CALL SIGNS are being machined now. The first run will be shipping to customers the week of Nov 22 (Thanksgiving)

THE FUN PART:

If you would like to pre-order your CALL SIGN now, here's what you'll need to do.

1. Reply in this thread: SEND IT!

2. We will PM you with a one time use code for the ARCHETYPE RACING website.

3. Go to the link, also provided in the PM, to the CALL SIGN, and you'll be able to check out with the BRONCO6G 20% discount.

4. Continue going crazy, either waiting for your BRONCO to arrive or this sweet box of goodness to land on your doorstep!

Send it!

Sponsored

 

[JPMonahasn]

The official AR | CALL SIGN renderings are here! If you have a BRONCO and you need to get a front plate on it (you know, for legal purposes) or if you have a BRONCO inbound and don't want your dealer to drill new holes into your new rig, this is for you!

**Call your dealer and tell them that you will bring them a bracket.**

Fitment:

The CALL SIGN is designed for the Modular Bumper. The CALL SIGN will fit the left or right modular mount on the bumper. Like our other products, the CALL SIGN is full 6061 billet aluminum with quality 316 stainless mounting hardware (all provided). This bolts right in to the existing threaded holes in you bumper. No plastic, no sheet metal, no corners cut. Yes, even the actual license plate mount is a fully machined billet component. All done right here in the USA! Dare I say, probably the nicest and most robust license plate mount to be installed on a vehicle.

The license plate bracket is designed to 50 state DOT passenger vehicle license plate standards. All mounting hardware, not only for the mounts to the bumper, but also to mount your license plate are provided. This is a very smart and well put together piece of kit. Headlight performance and parking sensors will not be affected by the CALL SIGN's placement.

Very soon, we'll begin to develop a line of parts that utilize the same base mounts the CALL SIGN uses for auxiliary lights, dune flag, antenna mount, GoPro mount, etc. You can run a license plate on one side and an accessory on the other side, fully leveraging what the OEM has provided for on board mounting. Color is a classy RAL 7043 Traffic Grey, which nicely compliments the OEM grey on the bumper.

PRICING:

Retail for the CALL SIGN is $167.50

The discounted BRONCO6G member price is $134.00

AVAILABILITY:

CALL SIGNS are being machined now. The first run will be shipping to customers the week of Nov 22 (Thanksgiving)

THE FUN PART:

If you would like to pre-order your CALL SIGN now, here's what you'll need to do.

1. Reply in this thread: SEND IT!

2. We will PM you with a one time use code for the ARCHETYPE RACING website. AR | CALL SIGN

3. Go to the link, also provided in the PM, to the CALL SIGN, and you'll be able to check out with the BRONCO6G 20% discount.

4. Continue going crazy, either waiting for your BRONCO to arrive or this sweet box of goodness to land on your doorstep!

View attachment 192428

send it

 

[EIGHTLUG]

Fresh heat from the kitchen. Post 1 is also updated with this image.

 

[PNWBronco]

@EIGHTLUG Any sneak peaks re: something for those bull bar equipped Broncos?

I have something totally different planned for those bull bar equipped Broncos

 

[EIGHTLUG]

@EIGHTLUG Any sneak peaks re: something for those bull bar equipped Broncos?

This part will really get rolling, once we are back from SEMA and have more 3D scan data modeled with accurate horizon, plumb, and level reference marks to work from. No one wants a crooked license plate mount.

 

[greyburn]

SEND IT!

 

[Ramblinm4n]

Send it!

 

[Future Bronco Owner]

The official AR | CALL SIGN renderings are here! If you have a BRONCO and you need to get a front plate on it (you know, for legal purposes) or if you have a BRONCO inbound and don't want your dealer to drill new holes into your new rig, this is for you!

**Call your dealer and tell them that you will bring them a bracket.**

Fitment:

The CALL SIGN is designed for the Modular Bumper. The CALL SIGN will fit the left or right modular mount on the bumper. Like our other products, the CALL SIGN is full 6061 billet aluminum with quality 316 stainless mounting hardware (all provided). This bolts right in to the existing threaded holes in you bumper. No plastic, no sheet metal, no corners cut. Yes, even the actual license plate mount is a fully machined billet component. All done right here in the USA! Dare I say, probably the nicest and most robust license plate mount to be installed on a vehicle.

The license plate bracket is designed to 50 state DOT passenger vehicle license plate standards. All mounting hardware, not only for the mounts to the bumper, but also to mount your license plate are provided. This is a very smart and well put together piece of kit. Headlight performance and parking sensors will not be affected by the CALL SIGN's placement.

Very soon, we'll begin to develop a line of parts that utilize the same base mounts the CALL SIGN uses for auxiliary lights, dune flag, antenna mount, GoPro mount, etc. You can run a license plate on one side and an accessory on the other side, fully leveraging what the OEM has provided for on board mounting. Color is a classy RAL 7043 Traffic Grey, which nicely compliments the OEM grey on the bumper.

PRICING:

Retail for the CALL SIGN is $167.50

The discounted BRONCO6G member price is $134.00

AVAILABILITY:

CALL SIGNS are being machined now. The first run will be shipping to customers the week of Nov 22 (Thanksgiving)

THE FUN PART:

If you would like to pre-order your CALL SIGN now, here's what you'll need to do.

1. Reply in this thread: SEND IT!

2. We will PM you with a one time use code for the ARCHETYPE RACING website. AR | CALL SIGN

3. Go to the link, also provided in the PM, to the CALL SIGN, and you'll be able to check out with the BRONCO6G 20% discount.

4. Continue going crazy, either waiting for your BRONCO to arrive or this sweet box of goodness to land on your doorstep! View attachment 194213

View attachment 192428

SEND IT!

 

[WuNgUn]

I totally would of mounted that turned down, over the recovery hook...and made it able to flip up, like an old school gas filler or something

 

[cd13]

SEND IT

 

[specialk]

send it!

 

[Brianstrange]

Plenty of data gathered for future parts R&D. Pocket light mounting brackets, light brackets for the modular bumper mount points, recovery points, and most definitely the CALL SIGN!

We also have the trail sights digitized for a before billet design which will be a launching point for all of those accessory mounts you want. These will be adventure/overland based. Think HiLift Jacks, fishing pole holder, anything you low profile that you would want to keep easily accessible outside of your rig. I’ll create another thread to track development on the trail sight.

The official AR | CALL SIGN renderings are here! If you have a BRONCO and you need to get a front plate on it (you know, for legal purposes) or if you have a BRONCO inbound and don't want your dealer to drill new holes into your new rig, this is for you!

**Call your dealer and tell them that you will bring them a bracket.**

Fitment:

The CALL SIGN is designed for the Modular Bumper. The CALL SIGN will fit the left or right modular mount on the bumper. Like our other products, the CALL SIGN is full 6061 billet aluminum with quality 316 stainless mounting hardware (all provided). This bolts right in to the existing threaded holes in you bumper. No plastic, no sheet metal, no corners cut. Yes, even the actual license plate mount is a fully machined billet component. All done right here in the USA! Dare I say, probably the nicest and most robust license plate mount to be installed on a vehicle.

The license plate bracket is designed to 50 state DOT passenger vehicle license plate standards. All mounting hardware, not only for the mounts to the bumper, but also to mount your license plate are provided. This is a very smart and well put together piece of kit. Headlight performance and parking sensors will not be affected by the CALL SIGN's placement.

Very soon, we'll begin to develop a line of parts that utilize the same base mounts the CALL SIGN uses for auxiliary lights, dune flag, antenna mount, GoPro mount, etc. You can run a license plate on one side and an accessory on the other side, fully leveraging what the OEM has provided for on board mounting. Color is a classy RAL 7043 Traffic Grey, which nicely compliments the OEM grey on the bumper.

PRICING:

Retail for the CALL SIGN is $167.50

The discounted BRONCO6G member price is $134.00

AVAILABILITY:

CALL SIGNS are being machined now. The first run will be shipping to customers the week of Nov 22 (Thanksgiving)

THE FUN PART:

If you would like to pre-order your CALL SIGN now, here's what you'll need to do.

1. Reply in this thread: SEND IT!

2. We will PM you with a one time use code for the ARCHETYPE RACING website. AR | CALL SIGN

3. Go to the link, also provided in the PM, to the CALL SIGN, and you'll be able to check out with the BRONCO6G 20% discount.

4. Continue going crazy, either waiting for your BRONCO to arrive or this sweet box of goodness to land on your doorstep! View attachment 194213

Send it!

 

[ProudestMonkey]

Send it!

 

[Monstertorch]

SEND IT!

 

[Hellion10]

The official AR | CALL SIGN renderings are here! If you have a BRONCO and you need to get a front plate on it (you know, for legal purposes) or if you have a BRONCO inbound and don't want your dealer to drill new holes into your new rig, this is for you!

**Call your dealer and tell them that you will bring them a bracket.**

Fitment:

The CALL SIGN is designed for the Modular Bumper. The CALL SIGN will fit the left or right modular mount on the bumper. Like our other products, the CALL SIGN is full 6061 billet aluminum with quality 316 stainless mounting hardware (all provided). This bolts right in to the existing threaded holes in you bumper. No plastic, no sheet metal, no corners cut. Yes, even the actual license plate mount is a fully machined billet component. All done right here in the USA! Dare I say, probably the nicest and most robust license plate mount to be installed on a vehicle.

The license plate bracket is designed to 50 state DOT passenger vehicle license plate standards. All mounting hardware, not only for the mounts to the bumper, but also to mount your license plate are provided. This is a very smart and well put together piece of kit. Headlight performance and parking sensors will not be affected by the CALL SIGN's placement.

Very soon, we'll begin to develop a line of parts that utilize the same base mounts the CALL SIGN uses for auxiliary lights, dune flag, antenna mount, GoPro mount, etc. You can run a license plate on one side and an accessory on the other side, fully leveraging what the OEM has provided for on board mounting. Color is a classy RAL 7043 Traffic Grey, which nicely compliments the OEM grey on the bumper.

PRICING:

Retail for the CALL SIGN is $167.50

The discounted BRONCO6G member price is $134.00

AVAILABILITY:

CALL SIGNS are being machined now. The first run will be shipping to customers the week of Nov 22 (Thanksgiving)

THE FUN PART:

If you would like to pre-order your CALL SIGN now, here's what you'll need to do.

1. Reply in this thread: SEND IT!

2. We will PM you with a one time use code for the ARCHETYPE RACING website. AR | CALL SIGN

3. Go to the link, also provided in the PM, to the CALL SIGN, and you'll be able to check out with the BRONCO6G 20% discount.

4. Continue going crazy, either waiting for your BRONCO to arrive or this sweet box of goodness to land on your doorstep! View attachment 194213

View attachment 192428

Send it

Sponsored