- First Name
- Ryan
- Joined
- Apr 27, 2022
- Threads
- 24
- Messages
- 149
- Reaction score
- 815
- Location
- Auburn, HI
- Website
- arbusa.com
- Vehicle(s)
- Jeep LJ, Ford Ranger, Ford Bronco
- Your Bronco Model
- Outer Banks
- Thread starter
- #1
One might argue that Under Vehicle Protection is the most important accessory for off-roading. Unlike bumpers and rock sliders, a solid under vehicle protection system/skid plates will ensure the vital components of your drivetrain remain intact.
ARB has developed a frame-mounted system that protects your Broncos steering, engine sump, transmission, transfer case, and much more. The press-formed and folded 3mm sheet steel skid plates come in at 88lbs installed and will give you the peace of mind you need on the trail.
Front Panel: Engine
Differential/Sump Panel: Front differential and mounts, rear of engine sump, and power steering
Transmission Panel: Stabilizer bar and transmission
Transfer Case Panel: Transfer case
For us to retain the strength of our full under vehicle protection system when off-road, vehicle servicing requires the removal and refit of the panels to obtain access to drain plugs and other service points. Removing each of the plates also provides you with the opportunity to check for damage and remove any foreign matter, dirt, or debris.
ARB’s UVP will fit with any ARB front bumper and OE front bumper. Fitment has not been confirmed with other bumper designs.
Additional Features
View attachment 5480100 Bronco UVP Instructions 37801053.pdf
ARB has developed a frame-mounted system that protects your Broncos steering, engine sump, transmission, transfer case, and much more. The press-formed and folded 3mm sheet steel skid plates come in at 88lbs installed and will give you the peace of mind you need on the trail.
Front Panel: Engine
Differential/Sump Panel: Front differential and mounts, rear of engine sump, and power steering
Transmission Panel: Stabilizer bar and transmission
Transfer Case Panel: Transfer case
ARB’s UVP will fit with any ARB front bumper and OE front bumper. Fitment has not been confirmed with other bumper designs.
Additional Features
- Laser cut 3mm sheet steel
- Zinc plates and powder coated in a silver texture finish
- Recessed mounting bolts are protected and easy to remove for vehicle servicing
- This ARB UVP set does not fit the Bronco Sport.
- The ARB’s UVP will fit with or without an ARB front bumper. Fitment compatibility has not been confirmed with other bumper designs.
- To retain the strength and protection required of an ARB UVP, full vehicle servicing will require the removal and refit of panels to obtain access to drain plugs and other service points. Provision is provided to drain engine oil only with a removable insert in the second pan
View attachment 5480100 Bronco UVP Instructions 37801053.pdf
Sponsored
Last edited: