- First Name
- Trey
- Joined
- Sep 23, 2020
- Threads
- 8
- Messages
- 154
- Reaction score
- 504
- Location
- Frederick, CO
- Vehicle(s)
- 2021 Ford Bronco
- Your Bronco Model
- Badlands
- Thread starter
- #1
So an update to the B&O audio rip and replace on my ‘21 Badlands 2 door -
Zen DSP12A-A2B processor to get a clean signal without the Ford/B&O processing in the way
Mosconi Pico 8|10 DSP V2 amp (90 watts x4 + 50 watts x4)
Mosconi Pico 1 single channel amp (750 watts x1)
B.A.R.N.I.E. custom tuning
Dash - MTI Acoustics Bronco Dash Plates with Focal flax cone PS 165 F3 EVO 3” midrange drivers and tweeters (50w x4 channels) utilizing active crossover
Kick panels - Focal PS 165 FXE Flax cone 6.5” Components (90w x2 channels) utilizing active crossover, custom speaker grills with active orange accent ring
Rear - Speaker pods replaced with larger MTI Acoustics versions that accept 6.5” coaxial, Focal PC 165F Flax 6.5” coax in that location (90w x2 channels)
Rear swing gate - Custom full depth sub enclosure with Bronco badge, 10” Focal 25 KXE Kevlar cone sub - added Turn Offroad hinge replacement style swing gate brace
3D printed grille with Bronco logo in OEM sub grill location along with fans controlled by upfitter AUX6 switch to promote proper cooling
-This change included replacing the single 5 channel amp in place previously, adding a standalone 1 channel sub amp, deleting the standalone DSP as the new Pico amp integrates this, adding midrange speakers to dash along with dash plates, adding active crossovers, upgrading the sub to Kevlar cone, adding custom built speaker grille on sub enclosure.
Installed at Absolutely Creative Customs in Boulder, CO
Zen DSP12A-A2B processor to get a clean signal without the Ford/B&O processing in the way
Mosconi Pico 8|10 DSP V2 amp (90 watts x4 + 50 watts x4)
Mosconi Pico 1 single channel amp (750 watts x1)
B.A.R.N.I.E. custom tuning
Dash - MTI Acoustics Bronco Dash Plates with Focal flax cone PS 165 F3 EVO 3” midrange drivers and tweeters (50w x4 channels) utilizing active crossover
Kick panels - Focal PS 165 FXE Flax cone 6.5” Components (90w x2 channels) utilizing active crossover, custom speaker grills with active orange accent ring
Rear - Speaker pods replaced with larger MTI Acoustics versions that accept 6.5” coaxial, Focal PC 165F Flax 6.5” coax in that location (90w x2 channels)
Rear swing gate - Custom full depth sub enclosure with Bronco badge, 10” Focal 25 KXE Kevlar cone sub - added Turn Offroad hinge replacement style swing gate brace
3D printed grille with Bronco logo in OEM sub grill location along with fans controlled by upfitter AUX6 switch to promote proper cooling
-This change included replacing the single 5 channel amp in place previously, adding a standalone 1 channel sub amp, deleting the standalone DSP as the new Pico amp integrates this, adding midrange speakers to dash along with dash plates, adding active crossovers, upgrading the sub to Kevlar cone, adding custom built speaker grille on sub enclosure.
Installed at Absolutely Creative Customs in Boulder, CO
Sponsored