Baja Designs RTL-M wiring for 3rd brake light

[CarbonBronco]

Hey guys anyone have the wire colors for the rear taillamp triggers for the rear parking lights and reverse lights? I’m planing to wire up my RTL-M to act as my 3rd brake light so I can omit my Oem 3rd brake light but at the same time I need the triggers for those 2 wires as well as I plan to use the white LEDs on the RTL-M to aid with my reverse lights currently. Any help would be appreciated. Here is a picture of what I’m planing to do.

Sponsored

 

[gomezoscar]

Did you ever get an answer to this? Curious to do the same thanks!

 

[jayhawkerr]

I referenced these two threads for the license plate and reverse wiring wire colors and locations:
https://www.bronco6g.com/forum/thre...light-kit-chase-lights-too.64750/post-1856205
https://www.bronco6g.com/forum/thre...e-plate-mount-install-diy-guide-review.69915/
You will also need a diode for your brake light and running light to function correctly.

 

[CarbonBronco]

I wired the red and yellow to the 3rd brake light wire so the light isn’t on all the time. The black to ground and the blue I traced to the taillamp wire inside the rear cargo area passenger side.

Sponsored