Baja LP9's on a HD modular bumper?

[We_Love_Tacos]

Not sure what I love more, your Avatar or your license plate


Side note, how is front camera view with those LP9s and the bracket?

Haha, thanks. Can’t believe the plate was available but most people think of themselves (I Tacos) instead of thinking of all etc.

You can see enough through the front camera but the sides are slightly blocked. No biggie for me. Here is a crap pic in the garage. Don’t mind the mess.

Sponsored

 

[JRBinMalibuCanyon]

Got my two LP6s installed using the outer two mounting points on the Swarfworks bracket. Amber backlighting tied to DRLs, Aux 1 is low beam, Aux 2 is high beam.

 

[Offroadalliance]

All these Broncos look so sick!! We have some LP9's and LP6's in stock if anyone else is interested in making their Bronco look as badass as these!

 

[BFT Blue Oval Boy]

No instructions makes for an interesting install . Actually the fabricator at Rudy’s gave me a few good tips which helped.

INSTALL TIPS (if using Rudy’s mount):

The mod bumper is nice to work with and fairly easy to remove. Pull out four plastic anchors around the tow hooks and remove the two large bolts on each side next to each other. The third bold just keep loosening until the bumper drops down a little so you can access the two rear mount spots. You may need to pull the bumper forward a little to get it to drop the front.

Next I would run the wiring harness through the bay to the front to connect to the lights. It’s a tight fit and also note there are louvers under the bumper and just over the top behind the grill you need to stay away from so they can operate how they are intended. Get those wires through and when you button it all back up together, connect to the lights before mounting the lights to the bumper.

The wiring harness is long which is great, but it also leaves a ton of wiring to zip tie up and keep out of the way.

The pic isn’t the greatest but it’s what you are getting for now.

I was considering other lighting but WOW are these bright. On low, super bright. On high, surface of the sun They are amazing. The backlight looks great as well. For now I wired all to the upfitters but I may change that later.

Found the thread you were telling me about on the phone! Looks awesome and I'm glad you're happy with it!

 

[Raptor911]

what happens when you flip aux1 and aux2 both on?

Got my two LP6s installed using the outer two mounting points on the Swarfworks bracket. Amber backlighting tied to DRLs, Aux 1 is low beam, Aux 2 is high beam.

 

[JRBinMalibuCanyon]

what happens when you flip aux1 and aux2 both on?

It looks and is no different than aux2 only. BD says not to do this, though, because it unnecessarily runs extra power/heat into the assembly. These lights are amazing — hard to believe some are running as many as 6 of them. Low beam is more illuminating than the OEMs on high.

 

[skiborsy]

Here's two LP6s on the Swarfworks bracket. I specifically went with Swarf because it appears to be spaced farther out than the Rudy's bracket, so I was hoping it would impact the 360 cam less.

 

[JRBinMalibuCanyon]

Here's two LP6s on the Swarfworks bracket. I specifically went with Swarf because it appears to be spaced farther out than the Rudy's bracket, so I was hoping it would impact the 360 cam less.

I recognize that view — my wife calls them the “wings”

 

[Draughon]

I’m absolute in love with this look - JCR Vanguard bumper with KC lights, Baja style.

def on of the first things I’m doing to mine.


(Not my ride - but saved for inspiration)

 

[4x4TruckLEDs.com]

We now offer the SwarfWorks Kit with any selection of LP4 and LP6 lights. Choose 1 light, 2 lights, 3 lights or no lights (bring your own).

Each light selected also includes an LP Series wiring harness (so 3 lights = 3 harnesses that you can twist together to 1 switch OR use 2 switches OR 3 switches if you want complete control).

Available here (and YES we have LP4 and LP6 in stock!)

https://www.4x4truckleds.com/swarfworks-triple-lp4-lp6-light-mount-for-2021-ford-bronco/

 

[Kai]

My 360 camera facing forward is slightly compromised by both lights on the side. It’s not a big deal to me

Can you post a pic of how much it blocks the 360/front views?

 

[We_Love_Tacos]

Can you post a pic of how much it blocks the 360/front views?

You can literally scroll up and see pics.

 

[TTT]

Got my two LP6s installed using the outer two mounting points on the Swarfworks bracket. Amber backlighting tied to DRLs, Aux 1 is low beam, Aux 2 is high beam.

can you show us how the camera looks with the lp6? does to covert to much visibility??

 

[Raptor911]

look at post #97

can you show us how the camera looks with the lp6? does to covert to much visibility??

 

[JRBinMalibuCanyon]

can you show us how the camera looks with the lp6? does to covert to much visibility??

Sponsored