BAMF bumper outifitted and ready

[TNcoupe]

Got my new BAMF bumper a few weeks ago and finally got my Baja Designs lights in after nearly a 2 month wait and my Warn Evo 10S. This is a really nice bumper with very good looking welds and the coating is pretty sweet. Its like a crinkle rubber powdercoating. Now if I can just get the Bronco to attach it to in a couple weeks.

Sponsored

 

[PWillette]

This is one of the few bumpers I am interested in. Are there provisions for the parking sensors?

 

[TNcoupe]

This is one of the few bumpers I am interested in. Are there provisions for the parking sensors?

I believe you can spec them with the parking sensor provisions. I have a standard (331A) package Badlands coming, no need for them for me.

 

[Tippster]

Here is one with the parking sensors - I finished it up this weekend. A before, after and a pic of the controller.

 

[PWillette]

Here is one with the parking sensors - I finished it up this weekend. A before, after and a pic of the controller.

Looks great! I just pulled the trigger on the same bumper, currently in production. How does the front camera view look?

 

[Tippster]

I did not have to touch the camera at all. For sure you can see the top of the winch and a small amount of the bumper but honestly I found it helpful to be there as a center point to target. I did stuff a bigger winch in there as well but overall pretty happy with camera view. I do have an issue with the clutch lever being a little too long so it does hit the bumper before disengaging so I do have to motor the line out until I solve for that.

 

[timbal1963]

I did not have to touch the camera at all. For sure you can see the top of the winch and a small amount of the bumper but honestly I found it helpful to be there as a center point to target. I did stuff a bigger winch in there as well but overall pretty happy with camera view. I do have an issue with the clutch lever being a little too long so it does hit the bumper before disengaging so I do have to motor the line out until I solve for that.

Can you share a picture of your front camera view? It would be helpful to see. Thanks.

 

[monkeysdad]

Here is one with the parking sensors - I finished it up this weekend. A before, after and a pic of the controller.

Mine was shipped yesterday and it looks like we may have the same winch. Did the bracket for your controller come with the winch or is that an aftermarket piece?

 

[Tippster]

The controller bracket for a remote location as mine shows is not included with the winch. There are several compressor brackets out there you can use. ARB has one that is priced like it’s made of titanium, but all of them work the same way. I just modified the hole pattern and it bolted in.

 

[dcg2]

Mine was shipped yesterday and it looks like we may have the same winch. Did the bracket for your controller come with the winch or is that an aftermarket piece?

If you're interested I can give some info about making the Badlands control module work with the BAMF relo bracket which leaves room for the ARB to still be installed.

It's a bit of work but for me was worth it to keep the flexibility of a potential future ARB compressor.

 

[monkeysdad]

If you're interested I can give some info about making the Badlands control module work with the BAMF relo bracket which leaves room for the ARB to still be installed.

It's a bit of work but for me was worth it to keep the flexibility of a potential future ARB compressor.

That would be great!

 

[Bo-Ronco]

This is one of the few bumpers I am interested in. Are there provisions for the parking sensors?

I'm a fan of their Overland bumper. And it does have provisions for sensors....

https://www.bronco6g.com/forum/threads/bamf-overland-bumper-takes-a-lick-in-moab-and.50438/

Sponsored