BAMF Overland front winch bumper

[BAMF]

Take my money! Please!

Soon!

Tell me more about the rear bumper with integrated tire swing gate please. Hoping the tire will be centered and single side to run in conjunction with gate!

Yep you are hoping for the right thing. It will be a single passenger swinging arm with centered tire integrated into the rear gate to support up to a 40" tire.

Sponsored

 

[Mdh186]

Yep you are hoping for the right thing. It will be a single passenger swinging arm with centered tire integrated into the rear gate to support up to a 40" tire.

YES! Thank you!

 

[BroncoWar1]

Yes as long
as the front frame horns can handle stress, you could pull the front end off the truck with these recovery points.

I see that the bumper tab thickness are 3/4"...What is the hole diameter? I am planning to use my Blue Ox tow bar with these single-lug connections made for- aftermarket bumpers with 3/4" tabs and 1" pins. Thx

https://www.etrailer.com/p-BX88358.html?hhyear=2021&hhmake=Ford&hhmodel=Bronco

 

[BAMF]

I see that the bumper tab thickness are 3/4"...What is the hole diameter? I am planning to use my Blue Ox tow bar with these single-lug connections made for- aftermarket bumpers with 3/4" tabs and 1" pins. Thx

https://www.etrailer.com/p-BX88358.html?hhyear=2021&hhmake=Ford&hhmodel=Bronco

They are cut at 1.02" so you might need to hone it but you should be solid for a tight fit.

 

[Jermd21]

If we want it a specific color, can you guys powder coat it or should we order it bare metal and have it done locally? Thank you for a very informative thread and a great looking bumper.

 

[BAMF]

We can do bare metal if you like. But we only coat black here unless it's a large job.

 

[mcashin1]

Just ordered! Don't have my bronco yet, but I've been eyeing this for a while, and I'm hoping with the lead time they'll arrive around the same time. Can't wait!

 

[BAMF]

Just ordered! Don't have my bronco yet, but I've been eyeing this for a while, and I'm hoping with the lead time they'll arrive around the same time. Can't wait!

Thanks for the order I'm hoping we beat Fords delivery.

 

[Elevator Man]

Do you have a picture from the front camera with the bull bar and no lights?

 

[Lcubed]

if you're starting with a badlands and the modular bumper, are there any pieces which need to be cut off?

if so, is the capable bumper a better starting point?

 

[Cable Guy]

 

[BAMF]

if you're starting with a badlands and the modular bumper, are there any pieces which need to be cut off?

if so, is the capable bumper a better starting point?

No Cutting. and the whole factory bumper is removed so the cheapest option is the best starting point unless your going sell what you remove.

 

[armandom]

Soon!



Yep you are hoping for the right thing. It will be a single passenger swinging arm with centered tire integrated into the rear gate to support up to a 40" tire.

I already have the order in for the new front bumper please let me know when i can order the rear.

Thanks
Armando

 

[armandom]

No Cutting. and the whole factory bumper is removed so the cheapest option is the best starting point unless your going sell what you remove.

One more question so I can order now will these lights work on the Overland Bumper I ordered.
Baja Designs Squadron Sports

 

[BAMF]

One more question so I can order now will these lights work on the Overland Bumper I ordered.
Baja Designs Squadron Sports

Yes they will. that's what it pictured in the bumper on the site.

Sponsored