Base Sasquatch Bronco wheeling in SoCal with 1" level kit, 37" KO2 tires, AC Fab Bumper and Sliders

[Roadkill]

Thank you for sharing.. Is that in rock crawl mode? I've gotta say it is disappointing if the gearing is so tall in low, way too fast for serious rock work just from watching.

Sponsored

 

[MaverickMan]

Thank you for sharing.. Is that in rock crawl mode? I've gotta say it is disappointing if the gearing is so tall in low, way too fast for serious rock work just from watching.

Auto trans problems. 4cyl mansquatch for the win!

 

[De Brus]

Thank you for sharing.. Is that in rock crawl mode? I've gotta say it is disappointing if the gearing is so tall in low, way too fast for serious rock work just from watching.

I think it comes down to driver experience with skinny pedal if you compare this to Vaughn Gitten Jr. or Loren Healy videos.

 

[Roadkill]

I think it comes down to driver experience with skinny pedal if you compare this to Vaughn Gitten Jr. or Loren Healy videos.

Ill have to look for them. Thanks

 

[Losy]

Check out a video I made. Showing my 2021 bronco base sasquatch with 1 inch leveling and 37" ko2 tires

Nice love Big Bear Lake.

 

[Hbrichman]

Hell yeah! Enjoyed the video, love it up in Big Bear.

 

[BroncoBoy22]

Thank you for sharing.. Is that in rock crawl mode? I've gotta say it is disappointing if the gearing is so tall in low, way too fast for serious rock work just from watching.

Not trying to rag on the OP because he’s already done more wheeling with his Bronco than I’ll ever do in mine but no, you can be way easier/smoother on the throttle from my experience at off-roadeo.

Plus if throttle control is an issue (it won’t be with a little practice) you can always use trail control or one pedal drive.

 

[Oscargrouch323]

Thank you for sharing.. Is that in rock crawl mode? I've gotta say it is disappointing if the gearing is so tall in low, way too fast for serious rock work just from watching.

I had a bit to much air in my tires Soni was spinning a lot. My bronco does not have crawler mode

 

[Oscargrouch323]

Not trying to rag on the OP because he’s already done more wheeling with his Bronco than I’ll ever do in mine but no, you can be way easier/smoother on the throttle from my experience at off-roadeo.

Plus if throttle control is an issue (it won’t be with a little practice) you can always use trail control or one pedal drive.

Yes I could of used crawl control but it just feels like I'm cheating. I did have to much air in my tires and didn't have enough grip. I'm still learning this truck and it's always trial and error. I run my crawler at 10 psi with beadlocks and rarely spin a tire. Until I get the beadlock rings for this one I won't go below 20psi.

 

[Frankie945]

I like your sliders I’m guessing frame mounted? Hardly any good sliders out yet for the bronco mostly step style ones.

 

[Oscargrouch323]

I like your sliders I’m guessing frame mounted? Hardly any good sliders out yet for the bronco mostly step style ones.

Yes I made them to bolt to the frame. Body mountain just wouldn't the the abuse.

 

[Sparkherd]

Check out a video I made. Showing my 2021 bronco base sasquatch with 1 inch leveling and 37" ko2 tires

Ya'll saw the vid with the guy in the Blue Bronc?
Foot flat on the skinny pedal?
Stock truck with big ol tires bouncing all over the place?
Two busted tie rods?
Now see the guy in the Red Bronco?
Foot NOT flat on the floor?
THAT's how you do it!

 

[De Brus]

Ya'll saw the vid with the guy in the Blue Bronc?
Foot flat on the skinny pedal?
Stock truck with big ol tires bouncing all over the place?
Two busted tie rods?
Now see the guy in the Red Bronco?
Foot NOT flat on the floor?
THAT's how you do it!

I don’t think I’ve seen the video that led to that destruction. Please share!

 

[Sparkherd]

I don’t think I’ve seen the video that led to that destruction. Please share!

It's all over Bronco6g.

 

[Oscargrouch323]

Nice man.
Cool to see people wheeling these Broncos.
Who made your front bumper?

I did

Sponsored