- First Name
- Brandon
- Joined
- Jul 30, 2020
- Threads
- 14
- Messages
- 234
- Reaction score
- 735
- Location
- Carlsbad CA
- Vehicle(s)
- 1968 F250
- Your Bronco Model
- Base
I like the KC lights.
Sponsored
The best I've seen to date. I'd build the same thing to a T!!! Hope you don't mind seeing one just like it show up in the future!!! Well done.Wow guys! Thanks for all the complements. As previously mentioned, the Bronco started life as an AMB 2 Door Badlands Lux Package w/Tow. All the constraints. The entire truck was pulled apart for the paint work. All the panels with Wimbledon White were completely scuffed, then painted and then cleared. The hood and trim around the windshield are the only places not painted. Then the entire vehicle was covered in xPel Stealth Paint Protection Film. The thin blue pinstripe is vinyl and its on top of the PPF.
The RotoPax is attached to the Hammer Built Modular Tailgate Protection System. The front bumper is the JCR Offroad Vanguard with PreRunner tubes. This build features King Shocks with adjustable compression, Baja Kits billet upper a-arms. The wheels are Method 315's with 0 offset. The tires are General Grabbers 35x12.5. It has a Warn EVO 10S winch and a boat load of KC HiLiTes LED lights.
This was built for my wife to drive everyday. It will also see plenty of action off road. This will not be a pavement princess.
Honestly, we have been blown away by all the positive comments. We expected this to "make a splash" (Throw back to us running it through a creek 2 hours after we left the dealership with it), but we never expected the attention it has received. So many people have tried to pull this look off. It simply wasn't easy to do, but I believe that we managed to nail it. I'm not completely loving the top, but it's a solid start.
Thanks again Y'all! We really do appreciate all the "love" this has gotten.
No, its not for sale.
Playing in our own backyard on the SxS trail. LOL
I didn't catch that at firstLove the custom plate
Wimbledon White. The white color Ford should have used.@Administrator, this is a fully painted build, the ONLY thing that is vinyl is the small separator stripe. Original is AMB with Wimbleton painted stripe and top.
#1Build by @ITLRUN (see full build thread @ https://www.bronco6g.com/forum/threads/retromod-bronco-build.39227/)
You did quite well on this.Wow guys! Thanks for all the complements. As previously mentioned, the Bronco started life as an AMB 2 Door Badlands Lux Package w/Tow. All the constraints. The entire truck was pulled apart for the paint work. All the panels with Wimbledon White were completely scuffed, then painted and then cleared. The hood and trim around the windshield are the only places not painted. Then the entire vehicle was covered in xPel Stealth Paint Protection Film. The thin blue pinstripe is vinyl and its on top of the PPF.
The RotoPax is attached to the Hammer Built Modular Tailgate Protection System. The front bumper is the JCR Offroad Vanguard with PreRunner tubes. This build features King Shocks with adjustable compression, Baja Kits billet upper a-arms. The wheels are Method 315's with 0 offset. The tires are General Grabbers 35x12.5. It has a Warn EVO 10S winch and a boat load of KC HiLiTes LED lights.
This was built for my wife to drive everyday. It will also see plenty of action off road. This will not be a pavement princess.
Honestly, we have been blown away by all the positive comments. We expected this to "make a splash" (Throw back to us running it through a creek 2 hours after we left the dealership with it), but we never expected the attention it has received. So many people have tried to pull this look off. It simply wasn't easy to do, but I believe that we managed to nail it. I'm not completely loving the top, but it's a solid start.
Thanks again Y'all! We really do appreciate all the "love" this has gotten.
No, its not for sale.
Playing in our own backyard on the SxS trail. LOL
This is actually part of the Hammer Built Modular Tailgate Support System. See link below.Looks like it may have the Rough Country tailgate reinforcement? Who makes the section that the fuel can is attached to?
The only vinyl on the truck is the then blue pinstripe. Then, the entire vehicle is covered in xPel Stealth PPF.Well that's odd, he mentioned in a previous thread that wraps were for people that had commitment issues, lol. I figured he had them use a matte clear. I guess changed his mind.