Sponsored

PREMiERdrum

Big Bend
Well-Known Member
Joined
Jul 10, 2020
Threads
20
Messages
650
Reaction score
10,345
Location
OH
Vehicle(s)
2013 Flex, 2016 Explorer, 2021 Bronco
Your Bronco Model
Big Bend
Clubs
 
Preface: Many of you know me from "the other" sites but I'm fortunate to have a few contacts remaining from my old days as a freelance auto industry journalist.

After earning its last required Federal certifications at the end of last week, every Bronco 2dr/4dr built starting this week and forward at MAP are legally sellable to the public (note that this does NOT affect Ford's OKTB, which will come sometime around the published Job 1 date).

From this past Monday through the next couple weeks, MAP is in a "Pre Mass Production" phase, running final-form Broncos on 2nd shift only. I don't have clarification on if these will be press demo units or the start of the dealer demo units, but my guess is a mix of both.

In any event, after a week or two of final downtime to prep for both shifts of full production, Bronco 2dr/4dr are set to enter "Phase 1 Mass Production" on Monday, March 29th. This does NOT change the published, public Job 1 date, but dealer demos, press cars, and Bronco orders will be built long before May. Nothing can be shipped to dealers for sale until the OKTB (Okay To Buy) is issued, typically through a series of batch builds, stops, and inspections. It's not unusual, however, for the OKTB to be issued BEFORE the published Job 1 date. This actually happened with the Ranger's launch at MAP.

I can't say for certain how this will impact the exact delivery date of my Bronco or yours, but actual, real production units will be rolling down the line at launch speed in about a month.
Sponsored

 

j_anderson

Outer Banks
Well-Known Member
First Name
Jason
Joined
Jan 24, 2021
Threads
12
Messages
831
Reaction score
1,462
Location
Fort Wayne, IN
Website
www.instagram.com
Vehicle(s)
2021 Bronco
Your Bronco Model
Outer Banks
Clubs
 
🍆
 

Sponsored

flatlander40

Badlands
Well-Known Member
Joined
Jul 24, 2020
Threads
26
Messages
855
Reaction score
2,039
Location
Texas
Vehicle(s)
F150
Your Bronco Model
Badlands
Clubs
 
Preface: Many of you know me from "the other" sites but I'm fortunate to have a few contacts remaining from my old days as a freelance auto industry journalist.

After earning its last required Federal certifications at the end of last week, every Bronco 2dr/4dr built starting this week and forward at MAP are legally sellable to the public (note that this does NOT affect Ford's OKTB, which will come sometime around the published Job 1 date).

From this past Monday through the next couple weeks, MAP is in a "Pre Mass Production" phase, running final-form Broncos on 2nd shift only. I don't have clarification on if these will be press demo units or the start of the dealer demo units, but my guess is a mix of both.

In any event, after a week or two of final downtime to prep for both shifts of full production, Bronco 2dr/4dr are set to enter "Phase 1 Mass Production" on Monday, March 29th. This does NOT change the published, public Job 1 date, but dealer demos, press cars, and Bronco orders will be built long before May. Nothing can be shipped to dealers for sale until the OKTB (Okay To Buy) is issued, typically through a series of batch builds, stops, and inspections. It's not unusual, however, for the OKTB to be issued BEFORE the published Job 1 date. This actually happened with the Ranger's launch at MAP.

I can't say for certain how this will impact the exact delivery date of my Bronco or yours, but actual, real production units will be rolling down the line at launch speed in about a month.
Great news!!
 

Adam W.

Wildtrak
Member
First Name
Adam
Joined
Feb 18, 2021
Threads
0
Messages
5
Reaction score
3
Location
Boston/ Maine
Vehicle(s)
F-150
Your Bronco Model
Wildtrak
Preface: Many of you know me from "the other" sites but I'm fortunate to have a few contacts remaining from my old days as a freelance auto industry journalist.

After earning its last required Federal certifications at the end of last week, every Bronco 2dr/4dr built starting this week and forward at MAP are legally sellable to the public (note that this does NOT affect Ford's OKTB, which will come sometime around the published Job 1 date).

From this past Monday through the next couple weeks, MAP is in a "Pre Mass Production" phase, running final-form Broncos on 2nd shift only. I don't have clarification on if these will be press demo units or the start of the dealer demo units, but my guess is a mix of both.

In any event, after a week or two of final downtime to prep for both shifts of full production, Bronco 2dr/4dr are set to enter "Phase 1 Mass Production" on Monday, March 29th. This does NOT change the published, public Job 1 date, but dealer demos, press cars, and Bronco orders will be built long before May. Nothing can be shipped to dealers for sale until the OKTB (Okay To Buy) is issued, typically through a series of batch builds, stops, and inspections. It's not unusual, however, for the OKTB to be issued BEFORE the published Job 1 date. This actually happened with the Ranger's launch at MAP.

I can't say for certain how this will impact the exact delivery date of my Bronco or yours, but actual, real production units will be rolling down the line at launch speed in about a month.
Thank you !
 

CDN Jen

Badlands
Well-Known Member
First Name
Jennifer
Joined
Jul 16, 2020
Threads
10
Messages
482
Reaction score
2,077
Location
Michigan
Vehicle(s)
Bronco Sport, 2021 Mustang GT Premium Convertible
Your Bronco Model
Badlands
Clubs
 
Thank you for the scoop! This will keep B6G busy all weekend speculating and calculating, now that we have a rough start date to go by.

Start your engines!! (vroom vroom)
 

Sponsored

Used2jeep

Banned
Black Diamond
Banned
Banned
First Name
Dave
Joined
Jul 16, 2020
Threads
46
Messages
6,191
Reaction score
12,813
Location
Massachuvian
Vehicle(s)
2007 Crown Vic P71
Your Bronco Model
Black Diamond
Clubs
 
Preface: Many of you know me from "the other" sites but I'm fortunate to have a few contacts remaining from my old days as a freelance auto industry journalist.

After earning its last required Federal certifications at the end of last week, every Bronco 2dr/4dr built starting this week and forward at MAP are legally sellable to the public (note that this does NOT affect Ford's OKTB, which will come sometime around the published Job 1 date).

From this past Monday through the next couple weeks, MAP is in a "Pre Mass Production" phase, running final-form Broncos on 2nd shift only. I don't have clarification on if these will be press demo units or the start of the dealer demo units, but my guess is a mix of both.

In any event, after a week or two of final downtime to prep for both shifts of full production, Bronco 2dr/4dr are set to enter "Phase 1 Mass Production" on Monday, March 29th. This does NOT change the published, public Job 1 date, but dealer demos, press cars, and Bronco orders will be built long before May. Nothing can be shipped to dealers for sale until the OKTB (Okay To Buy) is issued, typically through a series of batch builds, stops, and inspections. It's not unusual, however, for the OKTB to be issued BEFORE the published Job 1 date. This actually happened with the Ranger's launch at MAP.

I can't say for certain how this will impact the exact delivery date of my Bronco or yours, but actual, real production units will be rolling down the line at launch speed in about a month.
Why would they build units only on shift 2? What would the first shift folks be doing?
 

Bronco4lyfe85

Banned
Badlands
Banned
Banned
First Name
William
Joined
Aug 17, 2020
Threads
21
Messages
5,038
Reaction score
17,900
Location
Colorado
Vehicle(s)
2019 Challenger Scat Pack
Your Bronco Model
Badlands
Ford Bronco Big News: Mass Bronco production to begin March 29th (Note: Job 1 Date Unchanged) 🗓 1614348692960


Ford Bronco Big News: Mass Bronco production to begin March 29th (Note: Job 1 Date Unchanged) 🗓 1614348745162
 
OP
OP
PREMiERdrum

PREMiERdrum

Big Bend
Well-Known Member
Joined
Jul 10, 2020
Threads
20
Messages
650
Reaction score
10,345
Location
OH
Vehicle(s)
2013 Flex, 2016 Explorer, 2021 Bronco
Your Bronco Model
Big Bend
Clubs
 
Why would they build units only on shift 2? What would the first shift folks be doing?
I don't know the exact reason, but so far the PMP builds have all been 2nd shift. I assume 1st will get units going down the line in the next week or two before the break, as they want to have some time of both shifts running launch speed prior to MP1 starting.
 
 


Top